2017 MERCEDES-BENZ SLC-Class service

Service menu
Depending on the equipment installed in the
vehicle, you have the following options in the
Serv.
menu:
RCalling up display messages (Ypage 178)
RRestarting the tire pressure loss warning sys-
tem (Ypage 262)
RChecking the tire pressure electronically
(Ypage 262)
RCalling up the service due date
(Ypage 235)
Settings menu
Introduction
Depending on the equipment installed in the
vehicle, in the Sett.menu you have the follow-
ing options:
RChanging the instrumentc luster settings
(Ypage 172)
RChanging the light settings (Ypage 172)
RChanging the vehicle settings (Ypage 173)
RChanging the convenience settings
(Ypage 174)
RRestoring the factory settings (Ypage 175)
Instrument cluster
Selecting the distance unit
The Display Unit Speed-/Odometer:func-
tion allowsy ou to choose whether certain dis-
playsa ppear in kilometers or miles in the mul-
tifunction display.
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Instrument Clustersubmenu.
XPress ato confirm.
XPress the :or9 button to select the
Display Unit Speed-/Odometerfunction.
The current setting kmormilesappears.
XPress the abutton to save the setting.
The selected unit of measurement for distance
appliest o:
Rthe digital speedometer in the Tripmenu
Rthe odometer and trip odometer
Rthe trip computer
Rthe current consumption and the range
Rnavigation instructions in theNavimenu
Rcruise control
RDistancePilot DISTRONIC
RASSYST PLUS service interval display
Selecting permanent display
The Permanent Display:function allowsy ou
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter.
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Instrument Clustersubmenu.
XPress ato confirm.
XPress the :or9 button to select the
Permanent Display:function.
The current setting, Outside Temperature
orSpeedometer [km/h]orSpeedometer[mph],appears.
XTo change the setting: pressaagain.
Lights
Setting the daytime running lights
This function is not available in Canada.
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Lightsubmenu.
XPress ato confirm.
XPress the :or9 button to select the
Daytime Running Lightsfunction.
If the DaytimeRunningLightsfunction has
been switched on, the cone of light and the
W symbol in the multifunction display are
shown in orange.
XPress the abutton to save the setting.
Further information on daytime running lamps
(
Ypage 93).
Setting the brightness of the ambient
lighting
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Lightsubmenu.
172Menus and submenus
On-board computer and displays

Display messagesPossible causes/consequences andMSolutions
6
LeftSideC urtai nAirbag MalfunctionServic eRequiredorRi ghtSid eCurtai nAirbagMalfunctionServiceRequired
There is amalfunction in th eleft-han dand/o rright-hand head bag.
The 6 warning lamp also lights up in th einstrumen tcluster.
GWARNIN G
The lef torright head bag may either be triggered unintentionally or, in
th ee vent of an accident, may no tbetriggered .
There is an increased ris kofinjury.
XVisit aqualified specialist workshop immediately.
186Display messages
On-boardc omputer andd isplays

Display messagesPossible causes/consequences andMSolutions
ServiceRequiredDoNot Shift GearsVisit Dealer
You canno tchang et he transmission position due to amalfunction .
Aw arning tone also sounds.
If transmission position Dis selected:
XDrive to aqualified specialist workshop without shifting th etrans -
mission from position D.
If transmission position R,N or Pis selected:
XNotify aqualified specialist workshop or breakdown service.
ReversingNotPossi‐bleServic eRequiredYou canno tshift int othe transmission position Rdue to amalfunction .
The transmission position sP,N or Dcontinu etobea vailable.
Aw arning tone also sounds.
XVisit aqualified specialist workshop .
Transmission Mal‐function StopAmalfunction has occurred in th emechanical transmission compo -
nents.
Aw arning tone also sounds. The gearbox automatically shift stoposi-
tion N.
XPull ove rand stop th evehicl esafely as soo naspossible, payin g
attention to roa dand traffic conditions.
XShift th etransmission to position P.
XSecurethe vehicl eagainst rollin gaway (Ypage 131).
XNotify aqualified specialist workshop or breakdown service.
Sto pVehicl eLeaveEngineRunnin gWaitTransmission Cool‐ing
The transmission has overheated. Pullin gaway can be temporarily
impaire dornotpossible.
XPull ove rand stop th evehicl esafely as soo naspossible, payin g
attention to roa dand traffic conditions. Do no tcontinue driving
under any circumstances.
XWait until th edisplay message disappear sbefore pullin gaway.
Auxiliary Batter yMalfunctionThe auxiliary battery for th eautomatic transmission is no longer bein g
charged.
XVisit aqualified specialist workshop at th enexto pportunity.
XUnti lthen, set th etransmission to position Pbefore you switch off
th ee ngine.
XBefor eleaving th evehicle, apply th eelectric parking brake.
NThe trunk lid is open .
XClosethe trunk lid.
Display messages199
On-boardc omputer andd isplays
Z

Stowage areas
Stowage spaces
Important safety notes
GWARNING
If object sinthe passenger compartmenta re
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants. In
addition, cupholders, open stowage spaces
and mobile phone brackets cannot always
retain all object sthey contain. There is arisk
of injury, particularly in the event of sudden
braking or asudden change in direction.
RAlways stow object ssothat they cannot be
thrown around in such situations.
RAlways make sure that object sdonot pro-
trude from stowage spaces, parcel nets or
stowage nets.
RClose the lockable stowage spaces before
startin gajourney.
RAlways stow and secure heavy, hard, poin-
ted, sharp-edged, fragile or bulky object sin
the trunk.
Glove box
XTo open: pull handle :and open glove box
flap ;.
XTo close: fold glove box flap ;upwards until
it engages.
The glove box flap contains brackets for coins,
pens, and credit and service cards.
The glove box can be locked and unlocked using
the mechanical key.
XTo lock: insert the mechanical key into the
lock and turn it to position 2.
XTo unlock:insert the mechanical key into the
lock and turn it to position 1.
Stowage compartment/telephone
compartment under the armrest
XTo open:push button :up and raise arm-
rest ;.
The stowage compartmentc an be locked and
unlocked centrally using the SmartKey
(
Ypage 63).
iDepending on the vehicle equipment, aUSB
port and aMedia Interface is installed in the
stowage compartment. AMedia Interface is a
universal interface for mobile audio equip-
ment,e .g. for an iPod
®or MP3 Playe r.
Stowage areas217
Stowage and features
Z

Cigarettelighter
GWARNING
You can burn yourself if you touch th ehot
heating elementort hesocke tofthecigarette
lighter.
In addition,f lammable materialsc an ignite if:
Rtheh ot cigarette lighter falls
Rachild holdst hehot cigarette lighter to
objects, for example
Thereisar iskoff irea nd injury.
Always hold th ecigarette lighter by th eknob.
Always mak esure that th ecigarette lighter is
out of reac hofchildren. Never leave children
unsupervised in th evehicle.
Your attentio nmust always be focused on the
traffic conditions. Only use th ecigarette lighter
when road and traffic conditionsp ermit.
XTurn theSma rtKey to position 2in th eignition
lock(Ypage 115).
XTo open: push thelower sectio nofcover:.
The ashtray opens.
XPress in cigarette lighter ;.
Cigarett elighter ;will pop out automatically
when th eheating elementisr ed-hot.
12Vsockets
General notes
XTurn th eSma rtKey to position 1in th eignition
lock(Ypage 115).
The sockets can be used for accessorie switha
maximum draw of 18 0W(15 A). Accessories
include suchi tems as chargers for mobile
phones. If you use th
esockets for longp eriods when the
engineiss witched off ,the battery may dis-
charge.
iAn emergenc ycut-out ensure sthatthe on-
boardv oltage does no tdropt oo low. If th eon-
boardv oltage is to olow, th epower to the
sockets is automaticall ycut.T his ensures
that there is sufficient power to start the
engine.
Socket in th efront center console
XTo open: push thelower sectio nofcover:.
The stowage compartmen topens.
XLiftupt hecover of socket ;.
mbrace
General notes
You must have alicens eagreement to activate
th em brace service. Makes ure that your system
is activated and operational. To log in, pres sthe
ï MB Info call button. If any of th esteps
mentione dare no tcarried out,t hesystem may
no tbea ctivated.
If you have questionsa bout theactivation,c on-
tac tone of th efollowingt elephone hotlines:
RUSA: Mercedes-Ben zCustome rAssistance
Cente rat1-800-FOR -MERCedes
(1-800-367-6372 )or1 -866-990-9007
RCanada: Customer Servicea t
1-888-923-8367
Shortly after successfully registerin gwith the
service, auser ID and password will be sent to
you by post.
USA only: you can use this password to log onto
the mbrace area under "Owners Online" at
http://www.mbusa.com.
Features221
Stowage and features
Z

The system is availableif:
Rit has been activated and is operational
Rthe corresponding mobile phone network is
availablefor transmitting data to the Cus-
tomer Center
Ras ervice subscription is available
Rthe starter battery is sufficiently charged
iDetermining the location of the vehicle on a
map is only possible if:
RGPS reception is available.
Rthe vehicle position can be forwarded to
the Customer Assistance Center.
The mbrace system
To adjust the volume during acall, proceed as
follows:
XPress the WorX button on the multi-
function steerin gwheel.
or
XUse the volume controller of the audio sys-
tem/COMAND.
The system offers various services, e.g.:
RAutomatic and manual emergencyc all
RRoadside Assistance call
RMB Info call
USA only: you can find information and a
description of all availablef eatures under "Own-
ers Online" at http://www.mbusa.com.
System self-test
After you have switched on the ignition, the sys- tem carries out aself-diagnosis.
Am alfunction in the system has been detected
if one of the following occurs:
RThe indicator lamp in the SOS button does not
come on during the system self-test.
RThe indicator lamp in the FRoadside
Assistance button does not light up during
self-diagnosis of the system.
RThe indicator lamp in the ïMB Info call
button does not light up during self-diagnosis
of the system.
RThe indicator lamp in one or more of the fol-
lowing button scontinues to light up red after
the system self-diagnosis:
-SOS button
-F Roadside Assistance call button
-ïMB Info call button
RAfter the system self-diagnosis, the Inoper‐ativeorServiceNotActivatedmessage
appears in the multifunction display.
If am alfunction is indicated as outlined above,
the system may not operate as expected. In the
event of an emergency, help will have to be
summoned by other means.
Have the system checked at the nearest author-
ized Mercedes-Benz Center or contact the fol-
lowing service hotlines:
RUSA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372)o r1-866-990-9007
RCanada: Customer Service at
1-888-923-8367
Emergency call
Important safety notes
GWARNING
It can be dangerous to remain in the vehicle,
even if you have pressed the SOS button in an emergencyi f:
Ryou see smoke inside or outside of the vehi-
cle, e.g. if there is afire after an accident
Rthe vehicle is on adangerous section of
road
Rthe vehicle is not visible or cannot easily be seen by other road users, particularly when
dark or in poor visibility conditions
There is arisk of an accident and injury.
Leave the vehicle immediately in this or simi-
lar situations as soon as it is safe to do so.
Move to asafe location along with other vehi-
cle occupants. In such situations, secure the
vehicle in accordanc ewith national regula-
tions, e. g. with awarning triangle.
You must have alicense agreement to activate
the mbrace service. Make sure that your system
is activated and operational. To register, press
the ï MB Info call button .Ifany of the steps
222Features
Stowage and features

mentioned are not carried out, the system may
not be activated.
If you have questions aboutthe activation, con-
tact one of the following telephone hotlines:
RUSA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
RCanada: Customer Service at
1-888-923-8367
General notes
An emergency call is dialed automatically if an
air bag or Emergency Tensioning Device is trig-
gered.
iYou cannot end an automatically triggered
emergency call yourself.
An emergency call can als obeinitiated man-
ually.
As soon as the emergency call has been initi-
ated, the indicator lamp in the SOS button
flashes. The multifunction display shows the
ConnectingC all
message.
The audio outpu tismuted.
Once the connection has been made ,the Call
Connectedmessage appears in the multifunc-
tion display.
All important informatio nonthe emergency is
transmitted, for example:
Rcurrent location of the vehicle( as determined
by the GPS system)
Rvehiclei dentification number
Rinformatio nonthe severity of the accident
Shortly after the emergency call has been initi-
ated, avoice connection is automatically estab-
lished betwee nthe Customer Assistance Center
and the vehicleo ccupants.
RIf the vehicleoccupants respond, the
Mercedes-Benz Customer Assistance Center
attempts to get more informatio nonthe
emergency.
RIf there is no response from the vehicleo ccu-
pants, an ambulance is immediately sent to
the vehicle.
If no voice connection can be established to the
Mercedes-Benz Customer Assistance Center,
the system has been unable to initiate an emer-
gency call.
This can occur, for example, if the relevant
mobilep hone network is not available. The indi- cator lamp in the SOS button flashes continu-
ously.
The
Call Failed
message appears in the mul-
tifunction display and must be confirmed.
In this case, summon assistance by other
means.
Making an emergency call
XTo initiate an emergency call manually:
press cover :briefl ytoo pen.
XPress SOS button ;briefly.
The indicator lamp in SOS button ;flashes
until the emergency call is concluded.
XWai tfor av oice connection to the Mercedes-
Benz Customer Assistance Center.
XAfter the emergency call ,close cover :.
iIf the mobilep hone network is unavailable,
mbrace wil lnot be abl etomake the emer-
gency call .Ifyou leave the vehiclei mmedi-
ately after pressing the SOS button, you will
not know whether mbrace placed the emer-
gency call .Inthis case, alwayss ummon assis-
tance by other means.
Roadside Assistanceb utton
Features223
Stowage and features
Z

XPress Roadside Assistance button:.
This initiates acall to the Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in Roadside Assistance
button :flashes while the call is active. The
multifunction display shows the Connect‐
ing Callmessage. The audio output is
muted.
If ac onnection can be made, the Call Con‐
nectedmessage appears in the multifunction
display.
If am obile phone networ kand GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
Rcurrentl ocation of the vehicle
Rvehicle identification number
iThe display of the multimedia system indi-
cates that acall is active. During the call, you
can change to the navigation menu by press-
ing the NAVI button on COMAND,f or exam-
ple.
iVoice output is not available.
Av oice connection is established between the
Mercedes-Benz Customer Assistance Center
and the vehicle occupants.
From the remotem alfunction diagnosis, the
Mercedes-Benz Customer Assistance Center
can ascertain the nature of the problem
(
Ypage 225).
The Mercedes-Benz Customer Assistance Cen-
ter either sends aqualified Mercedes-Benz tech-
nician or makes arrangements for your vehicle
to be transported to the nearest authorized
Mercedes-Benz Center.
You may be charged for services such as repair
work and/or towing.
Further details are availableiny our mbrace
manual.
iThe system has not been able to initiate a
Roadside Assistance call, if:
Rthe indicator lamp for Roadside Assistance
call button :is flashing continuously.
Rno voice connection to the Mercedes-Benz
Customer Assistance Center was estab-
lished.
This can occur if the relevant mobile phone
networ kisnot available, for example.
The Call Failed
message appears in the
multifunction display.
XTo end acall: press the ~button on the
multifunction steerin gwheel.
or
XPress the corresponding multimedia system
button for ending aphone call.
MB Info call button
XPress MB Info call button :.
This initiates acall to the Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in MB Info call button :
flashes while the connection is being made.
The multifunction display shows the Con‐
nectingCallmessage. The audio system is
muted.
If ac onnection can be made, the Call Con‐
nectedmessage appears in the multifunction
display.
If am obile phone networ kand GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
Rcurrentl ocation of the vehicle
Rvehicle identification number
iThe display of the multimedia system indi-
cates that acall is active. During the call, you
can change to the navigation menu by press-
ing the NAVI button on COMAND,f or exam-
ple.
Voice output is not available.
Av oice connection is established between the
Mercedes-Benz Customer Assistance Center
and the vehicle occupants.
You receive information about operating your
vehicle, about the nearest authorized
Mercedes-Benz Center and about other prod-
ucts and services from Mercedes-Benz.
224Features
Stowage and features