2017 MERCEDES-BENZ SLC-Class wiper blades

Important safety notes .................. 288
Windshield wipers
Displaym essage............................ 201
Problem (malfunction) ................... 101
Replacing the wipe rblade s.............. 99
Switching on/of f.............................. 99
Winter driving
Important safety notes .................. 257
Slippery roa dsurfaces ................... 138
Snow chains .................................. 257
Winter operation
Overview ........................................ 257
Winter tires
M+S tire s....................................... 257
Wipe rblades
Cleaning ......................................... 239
Important safety notes .................... 99
Replacing ......................................... 99
Workshop
see Qualifie dspecialist workshop
Z
ZONE function
Switching on/of f........................... 109
20Index

XTurn housing cover:counter-clockwise and
pull it out.
XAt the bulb holder, push the bulb upwards,
disconnect it and pull it out of bulb holder ;.
XInsert the new bulb into bulb holder;at the
top, push it down and secure it in place.
XAttach housing cover :and turn it clockwise
until it engages.
Side marker lamp s(halogen head-
lamps)
Due to their location, have the bulbs in the side
marker lamp changed at aqualified specialist
workshop.
Windshield wipers
Switching the windshield wipers
on/off
!
Do not operate the windshield wipers when
the windshield is dry, as this could damage
the wiper blades. Moreover, dust that has col-
lected on the windshield can scratc hthe glass
if wiping takes place when the windshield is
dry.
If it is necessary to switch on the windshield
wipers in dry weather conditions, alwaysu se
washer fluid when operating the windshield
wipers.
!If the windshield wipers leave smears on the
windshield after the vehicle has been washed
in an automatic car wash, wax or other resi-
dues may be the reason for this. Clean the
windshield using washer fluid after washing
the vehicle in an automatic car wash.
!Intermittent wiping with rain sensor: due to
optical influences and the windshield becom-
ing dirty in dry weather conditions, the wind-
shield wipers may be activated inadvertently.
This could then damage the windshield wiper
blades or scratc hthe windshield.
For this reason, you should alwayss witch off
the windshield wipers in dry weather.
Combination switch
1
$ Windshield wiper off
2ÄIntermittent wipe, low (rain sensor set
to low sensitivity)
3Å Intermittent wipe, high (rain sensor
set to high sensitivity)
4° Continuous wipe, slow
5¯Continuous wipe, fast
BíSingle wipe/î Wipes the wind-
shield using washer fluid
If the wiper blades are worn, the windshield will
no longer be wiped properly. This could prevent
you from observing the traffic conditions.
Replacing the wiper blades
Important safety notes
GWARNING
If the windshield wipers begin to move while
you are changing the wiper blades, you could be trapped by the wiper arm. There is arisk of
injury.
Always switch off the windshield wipers and
ignition before changing the wiper blades.
!To avoid damaging the wiper blades, make
sure that you touch only the wiper arm of the
wiper.
!Never open the hood if awindshield wiper
arm has been folded away from the wind-
shield.
Never fold awindshield wiper arm without a
wiper blade back ontot he windshield.
Hold the windshield wiper arm firmly when
you change the wiper blade. If you release the
windshield wiper arm without awiper blade
Windshield wipers99
Lights and windshield wipers
Z

and it falls onto thewindshield, th ewindshield
may be damage dbytheforce of th eimpact.
Mercedes-Ben zrecommend sthaty ou have
th ew iper blades changed at aqualified spe-
cialis tworkshop.
!Always position th ewindshield wiper arms
vertically before folding them away from the
windshield. By doings o, you will avoid dam-
age to th ehood.
Replacing th ewiper blades
Removing th ewiper blades
XTurn th eSmartKey to position 1or 2in the
ignition lock(Ypage 115).
XSet th ewindshield wiper to position °.
XWhen thewiper arm shave reached th everti-
cal position,t urnt he SmartKey to position 0
and remove it from th eignition lock
(
Ypage 115).
XFol dthe windshield wiper arm saway from the
windshield.
XPres sbothr elease clips ;.
XFoldw iper blade :in th edirection of
arrow =away from wiper arm ?.
XRemovewiper blade :in th edirection of
arrow A.
Installin gthe wiper blades
XPositio nnew wiper blade :with recess B
on lug A.
XFoldw iper blade :in th edirection of
arrow =onto th ewiper arm ,until retaining
clips ;engage in bracket ?.
XMakesure that wiper blade :is seated cor-
rectly.
XFol dthe wiper arm back onto th ewindshield.
100Windshield wipers
Lightsa nd windshield wipers

!Make sure that:
Rthe side windows and the roof are com-
pletely closed
Rthe climate control blower is switched off
Rthe windshieldwiper switch is at position 0
The vehicle could otherwise be damaged.
You can wash the vehicle in an automatic car
wash from the very start.
If the vehicle is very dirty, pre-wash it before
cleaning it in an automatic car wash.
After using an automatic car wash, wipe off wax
from the windshielda nd the wiper blades. This
will prevent smears and reduce wiping noises
caused by residue on the windshield.
Washing by hand
In some countries, washing by hand is only
allowed at speciallye quipped washing bays.
Observe the legal requirements in each country.
XDo not use hot water and do not wash the
vehicle in direct sunlight.
XUse asoft sponge to clean.
XUse amild cleaning agent, such as acar
shampoo approved by Mercedes-Benz.
XThoroughly hose down the vehicle with agen-
tle jet of water.
XDo not point the water jet directly towards the
air inlet.
XUse plenty of water and rinse out the sponge
frequently.
XRinse the vehicle with clean water and dry
thoroughly with achamois.
XDo not let the cleaning agent dry on the paint-
work.
Carefully remove all deposits of road salt as
soon as possible when driving in winter.
Powerw ashers
GWARNING
The water jet from acircular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
nentsd amagedint his way may fail unexpect-
edly.T here is arisk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged
tires or chassis componentsr eplaced imme-
diately.
!Alwaysm aintainadistance of at least
11.8 in (30 cm) between the vehicle and the
power washer nozzle. Information aboutt he
correct distance is available from the equip-
ment manufacturer.
Move the power washer nozzle around when
cleaning your vehicle.
Do not aim directly at any of the following:
RTires
RDoor gaps, roof gaps, joints, etc.
RSoft top (Designo retractable hardtop)
RElectrical components
RBattery
RConnectors
RLights
RSeals
RTrim
RVentilation slots
Damaged seals or electrical componentsc an
lead to leaks or failures.
!Do not use high-pressure cleaners if the
tank recess is open while you clean it. This
can cause damage to the seals or other com-
ponents.
Cleaning the paintwork
!Do not affix:
Rstickers
Rfilms
Rmagnetic plates or similari tems
to painted surfaces. You could otherwise
damage the paintwork.
Scratches, corrosive deposits, areas affected by
corrosion and damage caused by inadequate
care cannot always be completely repaired. In
such cases, visit aqualified specialist workshop.
XRemove dirt immediately,w here possible,
while avoiding rubbing too hard.
XSoak insect remains with insect remover and
rinse off the treated areas afterwards.
XSoak bird droppings with water and rinse off
the treated areas afterwards.
XRemove coolant, brake fluid, tree resin, oils,
fuels and greases by rubbing gently with a
Care237
Maintenance and care
Z

Do not usepower washers with circular jet
nozzles to clean the vehicle. Hav edamaged
tire sorc hassiscomponents replaced imme-
diately.
!Do not us eacidi cwheel cleaning products
to remove brake dust. Thi scould damage
whee lbolts and brake components.
!Do not park your vehicl efor alon gp eriodo f
time directl yafter cleaning, particularly after
cleaning the whee lrim with whee lcleaner.
Whee lcleane rcan lead to the increased cor-
rosio nofthe brake discs and pads .Therefore,
drive for afew minute safter cleaning. By
heating up the brakes ,the brake discs and
pads dry .The vehicl ecan thenb eparked for a
long perio doftime.
Cleanin gthe windows
GWARNING
Yo uc ould become trapped by the windshield
wipers if theys tart moving whil ecleaning the
windshiel dorwiperblades. There is arisko f
injury.
Alway sswitch off the windshiel dwiper sand
the ignition befor ecleaning the windshiel dor
wipe rblade s.
!Do not us edry cloths, abrasive products,
solvents or cleaning agents containing sol-
vents to clean the insid eofthe windows .Do
not touch the insides of the windows with
hard objects ,e.g.ani ce scrape rorring. There
is otherwis eariskofd amagin gthe windows.
!Clea nthe water drainage channel softhe
windshiel dand the rea rwindo watr egular
intervals .Deposits such as leaves, petal sand
pollen mayu nder certain circumstances pre-
vent water fromd raining away.Thisc an lead
to corrosion damage and damage to elec-
troni ccomponents.
XClea nthe insid eand outside of the windows
with adam pcloth and acleaning product that
is recommende dand approved by Mercedes-
Benz.
Cleanin gwiper blades
GWARNING
Yo uc ould become trapped by the windshield
wipers if theys tart moving whil ecleaning the
windshiel dorwiperblades. There is arisko f
injury.
Alway sswitch off the windshiel dwiper sand
the ignition befor ecleaning the windshiel dor
wipe rblade s.
!Do not pull the wipe rblade .Otherwise, the
wipe rblade could be damaged.
!Do not clean wipe rblade stoo ofte nand do
not rubt hemtoo hard. Otherwise, the graph-
ite coating could be damaged. Thi scould
cause wipe rnoise.
!Hol dthe wipe rarm securel ywhenf olding
back. The windshiel dcould be damage difthe
wipe rarm smacks against it suddenly.
XFoldthe windshiel dwiper arms away fromt he
windshield.
XCarefully clean the wipe rblade swithad amp
cloth.
XFol dthe windshiel dwiper arms back again
befor eswitching on the ignition.
Cleanin gthe exterior lighting
!Onlyu secleaning agents or cleaning cloths
which ar esuitabl efor plastic light lenses.
Unsuitabl ecleaning agents or cleaning cloths
could scratch or damage the plastic light len- ses.
XClea nthe plastic lensesoft he exteriorlights
with awetspong eand am ildc leaning agent,
e.g .M ercedes-Benz car shampo oorcleaning
cloths.
Cleanin gthe mirrort urn signals
!Onlyusecleaning agents or cleaning cloths
thata resuitabl efor plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lensesoft he
mirror tur nsignals.
XClea nthe plastic lensesoft he mirror turnsig-
nal sint he exterio rmirror housing using awet
spong eand mil dcleaning agent, e.g.
Care239
Maintenance and care
Z