2017 MERCEDES-BENZ S-Class MAYBACH Comand Manual

XCall upVehicle Settings(Ypage 51).
XTo select Exterior Lighting DelayedSwitch-off: turn and press the controller.
The setting element is active.
XTo change the switch-off delay time: turn the
controller.
Arming/disarming the tow-away
alarm
An audible and visual alarm is triggered if your
vehicle's angle of inclination is altered while the
tow-away alarm is armed. This can occur if the
vehicle is jacked up on one side, for example.
XCall up Vehicle Settings(Ypage 51).
XTo select Tow-away Alarm: turn and press
the controller.
The function switches on or off, depending on
the previous setting.
Activating/deactivating the interior
motion sensor
When the interior motion sensor is activated, a
visual and audible alarm is triggered if move-
ment is detected in the vehicle interior. This can
occur if someone reaches into the vehicle inte-
rior without authorization, for example.
XCall up Vehicle Settings(Ypage 51).
XTo select Interior Motion Sensor: turn
and press the controller.
The function switches on or off, depending on
the previous setting.
Activating/deactivating the trunk lid
opening height restriction
Activating the Trunk Opening-heightRestrictionfunction allows you to avoid
bumping the trunk lid on a low garage ceiling, for
example.
XCall up Vehicle Settings(Ypage 51).
XTo select Trunk Opening-heightRestriction: turn and press the controller.
The function switches on or off, depending on
the previous setting.
Voice amplification
Overview
The voice amplification function supports com-
munication between the driver and front
passenger with passengers in the rear compart-
ment. The signals picked up by the microphone
in the rear view mirror are amplified and played
back over the speakers in the rear compart-
ment, depending upon vehicle noise levels.
An automatic adjustment matching occurs
based on speaker volume and ambient noise.
The optimum distance of the speaker from the
rear view mirror is approximately 50 cm. When
the system is active, the feeling of space and the
naturalness of speech playback should be main-
tained as far as is possible; speech intelligibility should be improved when there is an increase in
background noise.
Vehicle settings55
Vehicle functions
Z

If the volume of a background media source
exceeds a threshold, the speech amplification is
stopped. The threshold is designed for relaxed
conversation with background music. If the
threshold value is not exceeded, the voice
amplification is continued with a slight time
delay.
Voice amplification is paused during active tele-
phone calls or when using the Voice Control
System. A message will appear in the display.
You can assign these functions to the favorites
button (
Ypage 46).
Requirements
RYour vehicle is equipped with the Burmester®
surround sound system or the Burmester®
high-end 3D surround sound system.
RThe ignition is switched on.
RDoors, side windows and the panorama roof
with power tilt/sliding panel are closed.
iIf these conditions are not met, a corre-
sponding message will appear in the display.
Closing the side windows (see the vehicle Oper-
ator's Manual).
Closing the panorama roof with power tilt/slid-
ing panel (see the vehicle Operator's Manual).
Activating/deactivating voice amplifi-
cation
XCall up Vehicle Settings(Ypage 51).
XTo select Voice Amplification: turn and
press the controller.
The function switches on or off, depending on
the previous setting.
Seats
Overview
Using the Tbutton next to the controller or
the seat settings menu item in the vehicle menu,
you can call up the following adjustment func-
tions:
RBackrest side bolsters
RLumbar
RShoulder area
RMassage
RDynamics
RSeat heating balance
iYou also can save and recall the current set-
tings of a seat function using the memory
button and the corresponding memory posi-
tion switch. You can find further information
on the memory function in the vehicle Oper-
ator's Manual.
Selecting the adjustment function
and seat
XPress the Tbutton.
The seat settings menu is shown.
or
XTo select Vehiclefrom the main function bar:
turn and press the controller.
XTo select Seat Settingsin the menu: turn
and press the controller.
The menu for selecting seat functions is acti-
vated.
XTo select the required seat function: turn and
press the controller.
XTo switch between DriverandFrontPassenger: slide 1 the controller.
56Seats
Vehicle functions

Adjustment functions
Adjusting the backrest side bolsters
XCall up the seat function s(Ypage 56).
XTo selectBackrest Sides: turnand press
th econtroller.
XTo select a seat: slide 1thecontroller.
XTo change thesetting : turnthecontroller.
You will see the changes you have made in the setting s display.
XTo exit th emenu: press th e% button.
Adjusting the seat contour in the lum-
bar region of the seat backrest
This function allows you to adjust the air cush-
ions in the lumbar region of the backrest (4-way
lumbar support).
XCall up the seat function s(Ypage 56).
XTo selectLumbar: turnand press th econtrol -
ler.
XTo select a seat: slide 1thecontroller.
XTo activate the setting element: press the
controller.
XTo change thesetting : slide4or1
th econtroller.
The change will be visible in the setting ele-
ment.
XTo exit th emenu: press th e% button.
Adjusting the shoulder area
XCall up the seat function s(Ypage 56).
XTo selectShoulders: turnand press th econ-
troller.
XTo select a seat: slide 1thecontroller.
XTo change thesetting : turnthecontroller.
You will see the changes you have made in the
setting s display.
XTo exit th emenu: press th e% button.
Adjusting the driving dynamics
XCall up the seat function s(Ypage 56).
XTo select a seat: slide1thecontroller.
XTo select DynamicMulticontour Sea t:
turn and press th econtroller.
You can select:
R0: Of f
R1: Level 1 (weak)
R2: Level 2 (strong)
Seats57
Vehicle functions
Z

XTo select the setting: turn the controller.
XTo exit the menu:press the%button.
Seat heating balance
The balance function controls the distribution of
heat on the seat backrest and cushion.
The balance function influences the currently
set heating level of the seat heating (see the
vehicle Operator's Manual).
XCall up the seat functions (Ypage 56).
XTo select Seat Heating Balance: turn and
press the controller.
XTo select a seat: slide 1the controller.
XTo change the setting: turn the controller.
You will see the changes you have made in the
settings display.
The settings represent the following:
R0— the backrest and seat cushion are evenly
heated according to the setting selected with
the seat heating button.
R1to 3increasing — the heat output to the seat
cushion is reduced one level at a time.
R1to 3decreasing — the heat output for the
backrest is reduced one level at a time.
XTo exit the menu: press the%button.
Massage programs
Overview
You can select the following massage programs:
RHot Relaxing Massage, Back
Relaxing massage program starting in the pel-
vic area, warm pressure points can be felt, full
back massage, stretching the pelvic area,
ending with gentle soothing movements
RHot Relaxing Massage, Shoulders
Relaxing massage program starting in the pel-
vic area, warm pressure points can be felt, full
back massage, stretching the pelvic area,
ending with gentle soothing movements
RActivating Massage
Activating massage through increasing twin-
waves and then soothing movements
RClassic Massage
Massage with increasing waves, soothing
movements
RMobilizing Massage
Mobilization of the spinal column and the
complete upper body by means of pressure
point mobilizing massage at chest height
RActive Workout
The Active Workout program requires your
active participation. It is suitable for training
your stomach muscles during a traffic jam, for
example, by means of targeted tensing and
relaxing. You can use the program to be
sporty in the vehicle.
As soon as you feel a pressure point in the
backrest cushion, this indicates that you
should press against this point.
-As soon as you feel pressure on your back,
press against it.
-Keep the pressure under your feet even. Do
not wedge yourself against the pedals.
-You will feel how your stomach muscles
tense.
-Continue to breathe normally, do not hold
your breath.
-When the pressure in the backrest cushion
stops, stop pressing against it and relax
briefly.
Selecting a massage program
58Seats
Vehicle functions

XCall up the seat functions (Ypage 56).
XTo selectMassage: turn and press the con-
troller.
XTo select a seat: slide 1the controller.
XTo select massage programs: turn and press
the controller.
The massage program runs for approximately
15 to 25 minutes, depending on the setting.
XTo change the massage intensity: turn the
controller to :and press to confirm.
The intensity changes between gentle and
vigorous each time the controller is pressed.
XTo exit the menu: press the%button.
Resetting all adjustments
XCall up the seat functions (Ypage 56).
XSelect a seat (Ypage 56).
XTo select Reset: turn and press the controller.
XTo select a seat: slide 1the controller.
XTo reset: press the controller.
A prompt appears.
XTo select YesorNo: turn and press the con-
troller.
If you select No
the process is canceled.
After selecting Yes
all seat adjustments are
reset to the default values (factory setting).
Climate control settings
Overview
You have the following options for adjusting cli-
mate control settings:
Rusing the climate control bar
Rusing the clim ate control menu
You can set the most impo rtantclimate control
functions such as temperature, airflow and air distribution using the climate control bar. The
climate control bar is visible in most displays.
You can find all the climate control functions in
the climate control menu. You can use the cli-
mate control bar (
Ypage 59) to switch to the
clim ate control menu.
Settings in the climate control bar
Overview
You can set the most important clim ate control
functions directly in theclimate control bar and
change them inthe climate control menu.
:Adjusts temperature, airflow and air distri-
bution, left, as well as displaying the current
setting
;Calls up the climate control menu, displays
the current co oling and climate mode set-
ting
=Adjusts air distribution, airflow and temper-
ature on the right and displays the current
settings
Swit ching to the climate control bar:
XPress the Øbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
XSlide 6, release, then slide 6again, turn
and press the controller.
A menu appears.
Calling up the climate control bar
XPress the Øbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
XSlide 6the controller repeatedly until the
climate control bar is activated.
Climate control settings59
Vehicle functions
Z

Setting the temperature
XCalling up the climate control bar
(Ypage 59)
XTo select the current temperature on the left
or right: turn and press the controller.
The temperature setting scale appears.
XTo change the setting: turn the controller.
iYou can also use the climate control menu
(Ypage 60) to set the temperature.
Setting the airflow
XCalling up the climate control bar
(Ypage 59)
XTo select Jon the left or right: turn and
press the controller.
The airflow setting scale appears.
XTo change the setting: turn the controller.
iYou can also use the climate control menu
(Ypage 60) to set the airflow.
Setting the air distribution
XCalling up the climate control bar
(Ypage 59)
XTo select the current air distribution display
on the left or right, e.g. O: turn and press
the controller.
The air distribution setting scale appears.
XTo change the setting: turn the controller.
iYou can also use the climate control menu
(Ypage 60) to set the air distribution.
Settings in the climate menu
Overview
In the climate control menu there are settings
available in the bottom bar and the main area.
Calling up the climate control menu
XSwitch to the climate control bar (Ypage 59).
XTo select from climate control bar ;: turn
and press the controller.
The menu for selecting climate control func-
tions is activated.
XTo select the desired climate control function:
turn and press the controller.
The selected climate control function
appears.
60Climate control settings
Vehicle functions

Activating/deactivating climate con-
trol
This setting is made in the bottom bar of the
climate control menu.
XCall up the climate control menu(Ypage 60).
XTo switch to th efooter: slid e6 thecontrol -
ler.
XTo select OClimateCtr lOn: turn and
press th econtroller.
The climate control is switched on Oor off ª
depending on the settings.
If th e climate control is switched off:
Rthe climate control setting function s are
deactivated.
Rth e blower is switched off.
Rthe air recirculation flaps are closed
Activating/deactivating cooling with
air dehumidificati on
This setting is made in the bottom bar of the
climatecontrol menu.
iActivating th e cooling with air dehumidifi-
cation facilitates the cooling of the vehicle
interior even with high outside temperatures.
XCall up the climate control menu(Ypage 60).
XTo switch to th efooter: slid e6 thecontrol -
ler.
XTo select OA/C: turnand press th econtrol -
ler.
XThe cooling with air dehumidification function
is activated Oor deactivated ª.
iThe current status of the cooling function is
displayed in the climate control bar: A/CON
– activated, A/C OFF–deactivated
(
Ypage 59).
iDeactivating th e cooling with air dehumidi-
fication function reduces fuel consumption.
Activating/deactivating the synchroni-
zati on function
This setting is made in the bottom bar of the
climate control menu.
With theO
Syn c(synchronization) option, you
can decide whether you wish to activate the cli-
mate control setting s for all zones together or
separately.
XCall up the climate control menu(Ypage 60).
XTo switch to th efooter: slid e6 thecontrol -
ler.
XTo select OSync: turn and press th econ-
troller.
The synchronization function is activated O
or deactivated ª.
With the synchronization function switched off,
you can alternate between driver and front
passenger.
XTo switch from the footerto th e main area:
slide 5thecontroller.
XTo switch between left and right: slide 1
th econtroller.
Not all climate control function s allow switch-
ing between the driver and front passenger.
Further information on the synchronization
function (see the vehicle Operator's Manual).
Rea r-compa rtment climate control set-
tings
This setting is made in the bottom bar of the
climate control menu.
You can also set the rear-compartment air con-
ditioning from the front.
XCall up the climate control menu(Ypage 60).
XTo switch to th efooter: slid e6 thecontrol -
ler.
XTo select RearSettin g: turnand press th e
controller.
Setting rear-compartmen t climatecontrol is
switched on. The vehicle interior display
changes accordingly.
XTo switch the setting back to thefront again:
select Return to Front.
Afte rashort time, th e multimedia system
automatically switches the adjustment func-
tions back to the front.
Climate control settings61
Vehicle functions
Z

Adjusting the footwell temperature
This setting is made in the main area of the cli-
matecontrol menu.
XCall up the climate control menu(Ypage 60).
XTo selectAdjust Footwell: turnand press
th econtroller.
XIf necessary, chang e sides: slide1the
controller.
XTo change thesetting : turnthecontroller.
XTo exit the menu: press th e% button.
Adjusting the climate mode settings
This setting is made in the main area of the cli-
matecontrol menu.
The setting is only active when the air-condi-
tioning system is set to Ã(see the vehicle
Operator's Manual).
XCall up the climate control menu(Ypage 60).
XTo selectClimateMod e: turn and press th e
controller.
XIf necessary, chang e sides: slidethecontrol -
ler to the left 8or to th e right9.
XTo change thesetting : turnthecontroller.
XTo exit the menu: press th e% button.
The current airflow setting is shown in the cli-
mate control bar: DIFFUSE
,MEDIUMor FOCUS(Ypage 59).
Setting the perfu me atomizer
This setting is made in the main area of the cli-
matecontrol menu.
Further information about the perfume atomizer
(see the vehicle Operator's Manual).
XCall up the climate control menu(Ypage 60).
XTo selectAirFreshener: turnand press th e
controller.
The setting element is active.
XTo start/sto pth e perfume atomizer: press
th econtroller.
XTo set the intensity: turn the controller when
th e atomizer is switched on.
XTo exit the menu: press th e% button.
Switching ionization on/off
This setting is made in the main area of the cli-
matecontrol menu.
Further information on ionization (see the vehi-
cle Operator's Manual).
XCall up the climate control menu(Ypage 60).
XTo selectIonizatio n: turnand press th e
controller.
The setting element is active.
XTo switch the ionization on or off: turn the
controller.
XTo exit the menu: press th e% button.
62Climate control settings
Vehicle functions