2017 MERCEDES-BENZ GLE SUV HYBRID Owner's Manual

Control panel for 3-zone automatic climate control
USAonly
Front control panel
:Sets the temperature, left
;Defrosts the windshield
=Switches the maximum cooling MAX COOL on or off
?Switches cooling with air dehumidification on/off (Ypage 17)
ASwitches the rear window defroster on/off
BSets the temperature, right
CSwitches the ZONE function on/off
DActivates/deactivates climate control
ESets the air distribution
FIncreases the airflow
GReduces the airflow
HDisplay
IAdjusts the climate mode settings
JSwitches air-recirculation mode on/off
KSets climate control to automatic
Rear control panel
LIncreases the airflow
MSets the temperature
NSets rear-compartment climate control to automatic
ODirects the airflow through the rear air vents
PSwitches the seat heating on the right-hand side on/off
QDirects the airflow through the footwell vents
RSwitches the rear climate control on/off
SReduces the airflow
TSwitches the seat heating on the left-hand side on/off
Overview of climate control systems15
Climate control

Canada only
Front control panel
:Sets the temperature, left
;Defrosts the windshield
=Switches the residual heat on or off (Ypage 17)
?Switches cooling with air dehumidification on/off (Ypage 17)
ASwitches the rear window defroster on/off
BSets the temperature, right
CSwitches the ZONE function on/off
DActivates/deactivates climate control
ESets the air distribution
FIncreases the airflow
GReduces the airflow
HDisplay
IAdjusts the climate mode settings
JSwitches air-recirculation mode on/off
KSets climate control to automatic
Rear control panel
LIncreases the airflow
MSets the temperature
NSets rear-compartment climate control to automatic
ODirects the airflow through the rear air vents
PSwitches the seat heating on the right-hand side on/off
QDirects the airflow through the footwell vents
RSwitches the rear climate control on/off
SReduces the airflow
TSwitches the seat heating on the left-hand side on/off
16Overview of climate control systems
Climate control

In the vehicle Operator's Manual, information and recommendations can be found on:
Rusing automatic climate control
Rusing the rear control panel
Rthe individual functions
Observe these notes for optimal use of the automatic climate control.
The "Cooling with air dehumidification" function is even available when the engine is not running
(
Ypage 17).
Use the residual heat function if you want to heat or ventilate the vehicle interior when the ignition is switched off. The residual heat function can only be activated or deactivated with the ignition
switched off. When the ignition is switched on, the residual heat function is switched off
(
Ypage 17).
Operating the climate control sys-
tems
Switching cooling with air dehumidi-
fication on/off
If you deactivate the "Cooling with air-dehumid-ification" function, the air inside the vehicle will
not be cooled. The air inside the vehicle will also
not be dehumidified. The windows can fog up
more quickly. Therefore, deactivate the cooling
with air-dehumidification function only briefly.
The "Cooling with air dehumidification" function
is available even when the engine is not running.
The air inside the vehicle is cooled and dehu-
midified according to the temperature selected.
Condensation may drip from the underside of
the vehicle when it is in cooling mode. This is
normal and not a sign that there is a malfunc-
tion.
XTo activate: press the¿orÁ button.
The indicator lamp in the ¿orÁ button
lights up.
XTo deactivate: press the¿orÁ but-
ton.
The indicator lamp in the ¿orÁ button
goes out. The "Cooling with air dehumidifica-
tion" function has a delayed switch-off fea-
ture.
Switching the residual heat on or off
It is possible to make use of the residual heat of
the engine to continue heating the stationary
vehicle for up to 30 minutesafter the engine has
been switched off. The heating time depends on
the set interior temperature.
XTo activate: press theÌorÁ button.
The indicator lamp in the ÌorÁ button
lights up.
XTo deactivate: press theÌorÁ but-
ton.
The indicator lamp in the ÌorÁ button
goes out.
The blower will run at a low speed regardless of
the airflow setting.
If you activate the residual heat function at high
temperatures, only the ventilation will be acti-
vated. The blower runs at medium speed.
Residual heat is deactivated automatically:
Rafter approximately 30 minutes
Rwhen the ignition is switched on
Rif the battery voltage drops
Pre-entry climate control via Smart-
Key
General notes
Before getting in, the vehicle interior can be
briefly warmed or ventilated in advance and the air from the air vents can be pre-cooled.
The high-voltage battery must be sufficiently
charged before "Pre-entry climate control via
SmartKey" can be activated.
When the vehicle is pre-cooled, the following
functions are activated if required:
RClimate control system
RBlower
RSeat ventilation
Operating the climate control systems17
Climate control

When the vehicle is pre-heated, the following
functions are activated if required:
RClimate control system
RBlower
RSeat heating
If you have activated ionization via the multime-
dia system, it is activated together with pre-
entry climate control.
Activating/deactivating
Before "Pre-entry climate control via SmartKey"
can be activated, you must activate the function
using the on-board computer.
XTo activate: unlock the vehicle with the
SmartKey or KEYLESS-GO.
The climate control functions are activated
for up to 5 minutes for pre-heating and pre-
cooling.
XTo deactivate: "Pre-entry climate control via
SmartKey" deactivates automatically when
the engine is started.
The following functions remain active after the
engine is started:
RSeat heating (heating)
RSeat ventilation (ventilation)
RIonization
Problems with "Pre-entry climate control via SmartKey"
ProblemPossible causes/consequences and MSolutions
"Pre-entry climate con-
trol via SmartKey" can-
not be switched on or
has switched itself off.The condition of charge of the high-voltage battery is under the speci-
fied minimum condition of charge.
XStart the engine when the vehicle is at a standstill.
The engine powers the electric motor. The electric motor operates
as a generator. The high-voltage battery is being charged.
Further information on charging the high-voltage battery via:
Ra mains socket (Ypage 31)
Ra charging station (Ypage 35)
Ra wallbox (Ypage 34)
"Pre-entry climate control via SmartKey" has been started more than
twice with the engine switched off.
XSwitch on the engine and let it run for more than ten seconds.
XTry again to switch on "Pre-entry climate control via SmartKey".
Pre-entry climate control at time of
departure
Important safety notes
GWARNING
If persons, particularly children are subjected to prolonged exposure to extreme heat or
cold, there is a risk of injury, possibly even
fatal. Never leave children unattended in the
vehicle.
General notes
You can use the "Pre-entry climate control at
departure time" function to cool or heat the
vehicle interior if the engine is not running.
The "Pre-entry climate control at departure
time" function can be activated regardless of
whether or not the vehicle is connected to an
electric power supply. The condition of charge of
the high-voltage battery must be higher than the
specified minimum condition of charge, how-
ever.
When the vehicle is connected to an electric
power supply, priority is given to charging the
high-voltage battery to the specified minimum
charge. "Pre-entry climate control at departure
time" is only activated subsequently.
18Operating the climate control systems
Climate control

The running time of the "Pre-entry climate con-
trol at departure time" function may be reduced
if:
Rthe vehicle is not connected to an electric
power supply and
Rthe high-voltage battery is not fully charged
With active "Pre-entry climate control at depar-
ture time" the condition of charge of the high-
voltage battery can be reduced, even if the
charge cable connector is connected.
When the vehicle is cooled, the following func-
tions are activated if required:
RClimate control system
RBlower
RSeat ventilation
When the vehicle is heated, the following func-
tions are activated if required:
RClimate control system
RBlower
RSeat heating
If you have activated ionization via the multime- dia system, it is activated together with "Pre-
entry climate control".
Information on activating or deactivating "Pre-
entry climate control at departure time" using
the multimedia system (see the vehicle Opera-
tor's Manual).
Setting the departure time
You can set the departure time using the on-
board computer or via the online access to the
vehicle. The activation of the "Pre-entry climate
control at departure time" function can be linked
to this departure time. Your vehicle will then be
cooled or heated until the desired temperature
is reached in time for the set departure time.
"Pre-entry climate control at departure time" will
be activated a maximum of 55 minutes before
departure. If the departure is delayed, the vehi-
cle will be heated or cooled for another five
minutes.
XTo set the departure time: set the departure
time using the on-board computer
(
Ypage 44). Set the departure time using
the Mercedes connect me web App http://
www.mercedes.me.
XTo activate or deactivate "Pre-entry cli-
mate control at departure time": activate
or deactivate "Pre-entry climate control at
departure time" using the on-board com- puter. Activate or deactivate "Pre-entry cli-
mate control at departure time" using the
Mercedes connect me web App http://
www.mercedes.me.
The "Pre-entry climate control at departure
time" function switches off automatically when
the vehicle is started. The following functions
remain active:
RSeat heating
RSeat ventilation
RIonization
To deactivate "Pre-entry climate control at
departure time": the activated "Pre-entry cli-
mate control at departure time" can be deacti-
vated using the &button (
Ypage 19).
Activating/deactivating the "Immedi-
ate pre-entry climate control" function
using the button
You can activate "Immediate pre-entry climate
control" even if the vehicle interior is already at
the desired temperature. This means, for exam-
ple, that the vehicle interior continues to be
cooled or heated if the journey is interrupted for
up to 50 minutes and the interior temperature is
kept constant.
XTo activate or deactivate "Immediate pre-
entry climate control": press button:.
The blue or red indicator lamp in the button
lights up or goes out.
The colors of the indicator lamps on button :
have the following meanings:
Rblue: cooling activated
Rred: heating activated
Ryellow: departure time is preselected
Operating the climate control systems19
Climate control
Z

Driving
Points to remember
General notes
Hybrid technolog ycombine s afuelefficien t
internal combustion engin ewit h a powerful
electric motor. In HYBRIDmode, thehybrid
drive syste mautomatically selects th emost effi-
cien toperatin gmode fo revery drivin gsituation .
Drive th evehicle in th eusual manner.
To sav efue lin HYBRID mode, thehybrid drive
syste mswitches of fth ecombustion engin eas
ofte nas possible durin gth ejourney when powe r
output requirements are low. Whe npowe rout -
put requirements are low, th eelectric moto r
powers th evehicle. The engin eis switched on ,
eve nwhil eth evehicle is in motion ,when a
higher powe routput is required. The engin eis
usually switched of fwhen th evehicle is station -
ary. Consequently, there is usually no engin e
idlin gas wit hcombustion engin evehicles .
Fo rpulling away and accelerating, th eelectric
moto rsupports th einternal combustion engin e
usin gth epowe rstored in th ehigh-voltage bat -
tery. In addition ,th epowe ris used fo relectric
driving, operation of th eelectric refrigerant
compressor and to supply th e12 Von-boar d
electrical system. In this way th ehybrid drive
s

yste mhelps to reduce your vehicle' sfue lcon-
sumption .
Observ eth edrivin gtips on plug-i nhybrid oper-
ation (
Ypage 26).
Recuperative Brak eSyste m
If you release th eaccelerator peda lwhen th e
vehicle is in motion ,overrun recuperation is ini-
tiated. The electric moto ris operated as agen -
erato rwhen in overrun mode and when you
brake .Hybrid technolog yconvert sth ekineti c
energ yof th evehicle into electricit yand stores
it in th ehigh-voltage battery.
Observ eth eimportant safet ynote sfo rth e
Recuperative Brak eSyste m (
Ypage 11) .
Important safet ynotes
If th eengin eis switched of fby th eEC Ostart /
stop function ,you ope nth edriver's doo rand
unfasten your seat belt :
Ramessag eappears in th emultifunction dis -
play and
Ra warnin gtone sounds
Further information (
Ypage 45).
Al lof th evehicle' ssystems remain active ,if:
Rth evehicle is stationary
Rth ecombustion engin eis switched of fand
Rth eREADY indicator in th einstrumen tcluster
lights up
If you remov eyour foot from th ebrake peda l
whil ein transmissio nposition Dor R, th evehicle
may pull away automatically.
Observ eth enote son th eREADY display of th e
EC Ostart/sto pfunction (
Ypage 23).
Vehicles wit han electric moto rgenerate muc h
les sdrivin gnoise than vehicles wit hinternal
combustion engines. As aresult ,your vehicle
may no tbe hear dby other road user sin certain
situations.
Dependin gon th evehicle' sequipmen tand
country-specific regulations, th evehicle can be
equipped wit hAcoustic Vehicle Indication .
Acoustic Vehicle Indication generate s acertain
soun dat aspeed between 0and 20 mph
(30 km/h). Thi shelps other road users, par tic-
u

larly pedestrian sand cyclists, to hear your
vehicle better. The soun dcan also be hear d
insid eth evehicle.
The volume depend son th eengin espeed. The
faste ryou accelerate, th elouder th esoun dis. At
a speed of over 20 mph (30 km/h)the sound is
switched off. Above this speed, the natural
sounds from the vehicle are sufficient that it can
be heard in good time by other road users.
20Driving
Dr iving an d parking

Operating modes
Button:allows you to choose between differ-
ent operating modes.
XPress button :to change the operating
mode.
The operating mode selected appears in the
instrument cluster (
Ypage 39).
If it is not possible to change operating
modes, the display message Change the
current drive program before chang‐ing the operating mode.orExit man‐ualdriveprogramMbeforechangingthe operating mode.appears in the multi-
function display. Further information on "Dis-
play messages" (
Ypage 45).
:Operating mode selected
;Operating mode unavailable
=Operating mode available
HYBRIDRElectric mode or driving
with the internal combus-
tion engine is possible
RAutomatic selection of
drive mode with electric
mode as often as possi-
ble
RThe high-voltage battery
is discharged to approx-
imately 15%.
RTo subsequently main-
tain the condition of
charge of the high-volt-
age battery, the electric
output is reduced. All
vehicle functions such as
electric mode, energy
recuperation or boost
mode, for example, are
still available.
E-MODERPurely electric operation
until the performance
limit of the electric motor is reached
E-SAVERElectric mode or driving
with the internal combus-
tion engine is possible
RAutomatic selection of
drive mode with electric
mode as often as possi-
ble
RThe current condition of
charge of the high-volt-
age battery is maintained
so the electrical energy
can be used at a later
time.
CHARGERElectric drive is not pos-
sible
RCharging the high-volt-
age battery while driving
using the combustion
engine
In the Sport drive program (Ypage 22) and
during manual gearshifting (Ypage 23), only
the HYBRID operating mode is available.
If you switch from the Sportdrive program to
the Comfort drive program, the HYBRIDoper-
ating mode remains selected.
Driving21
Driving and parking

If manual gearshifting is deactivated, the auto-
matic transmission shifts:
Rinto the drive program that was last selected,
and
Rinto the driving mode that was last selected
If you change the drive program, the operating
mode that was last selected is stored for approx-
imately 60 seconds. After this time, the HYBRID
operating mode is automatically activated.
Starting the engine
The vehicle starts in electric mode without the
internal combustion engine (noiseless start).
The internal combustion engine starts only after the power demanded by the driver exceeds the
available power that the electric motor can cur-
rently provide.
Noiseless start operation is dependent on the
outside temperature and the operating temper- ature of the internal combustion engine. If not all
conditions for noiseless start operation are ful-
filled, the vehicle starts with the internal com-
bustion engine.
Observe the notes on starting in the vehicle
Operator's Manual.
XSwitch on the ignition.
XDepress the brake pedal.
XStart the vehicle (see the vehicle Operator's
Manual).
When the vehicle is operational, the READY
indicator lights up in the multifunction display
(
Ypage 39).
Pulling away
XDepress the brake pedal and keep it
depressed.
XShift the transmission to position Dor R.
XIf the Apply Brake to Shift from 'P'display message appears in the multifunction display, depress the brake pedal more firmly
and select the desired transmission position.
XRelease the brake pedal.
XCarefully depress the accelerator pedal.
You can find further information on pulling away
in the vehicle Operator's Manual.
Drive programs
DYNAMIC SELECT controller
Select the drive program using the DYNAMIC
SELECT controller. Depending on the drive pro-
gram selected the following vehicle character-
istics will change:
Rthe drive (engine and transmission manage-
ment)
Rthe suspension
Rthe steering.
Rthe energy management
Each time you start the engine with the ignition SmartKey or the Start/Stop button, the Com-
fort drive program is activated. You can find
further information on starting the engine in the
vehicle Operator's Manual.
XTurn DYNAMIC SELECT controller :as many
times as necessary until the desired drive
program is selected.
The status icon of the selected drive program
is shown in the multifunction display.
In addition, the current drive program settings are displayed briefly in the multimedia system
display.
22Driving
Driving and parking