2017 MERCEDES-BENZ GLC Owners Manual

X
Press the d or c button to adjust the
brightness to a level from Level +5 (bright) to
Level -5 (dark).X
Press the v or 8 button to save the
setting.
Light submenu Switching the daytime running lamps on/
off This function is not available in Canada. X
Press

X
Press v to confirm.
The Reset All Settings? function
appears. X
Press d or c to select No or Yes .X
Press v to confirm the selection.
If you have selected Yes , the multifunction
display shows a confirmation message.
For safety reasons, the Daytime Running
Lights function in the Lights submenu is only
reset when the vehicle is stationary.
AMG menu (Mercedes-AMG vehicles)
Warm-up
C
Digital speedometerD
Gear indicator

SETUP Overview
C
Drive Eco / Comfort / Sport / Sport + / Man‐
ualD
Chassis Comfort / Sport / Sport +

X
Press the d or c button to select New
Lap .X
Press v to confirm.
A maximum of 32 laps may be stored.
Stopping the RACETIMER X
Press d or c to select Stop .X
Press v to confirm.
Continuing the RACETIMER
X
Press d or c to select Continue .X
Press v to confirm.
Resetting the RACETIMER X
Press d or c to select Stop .
The RACETIMER is stopped. X
Press d or c to select Reset .X
Press v to confirm.
All laps are deleted.
Lap statistics
C
Lap D
Lap time

Display messages
Introduction
General notes Display messages appear in th e multifunction display.
Display messages wit h graphi c displays may be shown in simplified form in th e Operator's Manual
and may therefore diffe r from th e multifunction display.
Please respon d in accordance wit h th e display messages and follow th e additional note s in this
Operator's Manual.
Wit h certain display messages, you will also hear a warnin g tone .
You can hide th e display messages. The display messages are then stored in th e messag e memory.
Rectify th e cause of a display messag e as soo n as possible.
Whe n you stop and par k th e vehicle, please observ e th e note s on :R
HOLD function ( Y
page 171)R
Parking ( Y
page 154)
Hiding display messages X
Press th e v or 8 butto n on th e steerin g wheel.
The multifunction display hide s th e display message.
High-priorit y display messages are shown in red in th e multifunction display. Some high-priorit y
display messages canno t be hidden .
The multifunction display shows these messages continuously until th e causes fo r th e messages
hav e bee n remedied.
Message memory The on-boar d compute r saves certain display messages in th e message memory . You can cal l up
th e display messages: X
Press th e

Safety systems Display messages
Possible causes/consequences and P Solutions
%

Display messages
Possible causes/consequences and P Solutions

Display messages
Possible causes/consequences and P Solutions
z %