2017 MERCEDES-BENZ C-Class SEDAN radio

R
entering POIs in the vicinity of a city or via a
name search
R editing entries
Other entries are possible, such as entering
points of interest in the vicinity of the destina-
tion or current position. Switching to navigation mode
0043
Traffic reports can be received or traffic
reports are available
X Press the 00CBbutton.
If route guidance is active, the map is shown
in full-screen mode. The map shows the vehi- cle's current position.
If no route guidance is active, the menu is also
displayed. Destination
Destination is highlighted.
Access from one of the other main functions: X To activate the menu: slide5the con-
troller (e.g. in radio mode).
X To select Navi
Navi: turn and press the controller.
The navigation menu appears.
X Press the controller.
The map shows the vehicle's current position.
Access within navigation:
X From any menu, press the 00CBbutton.
The navigation menu appears.
X Press the controller. Showing/hiding the menu
Using the menu, you can make a destination
entry or select the navigation settings, for exam-
ple. X
To show: slide6the controller when the
map appears.
or X Swipe down the touchpad with one finger.
If there has been no route calculated, Des‐
Des‐
tination tination is marked.
If a route has been calculated, 008Fis
marked. X
To hide: press the 0038button.
or X Slide 5the controller.
Full screen symbol 0043appears.
X Press the controller. Moving the map
Requirement: the map is in full screen mode, the
menu is faded out (Y page 54).
X Press the controller.
The crosshair is shown.
X Slide 1, 4or2 the controller.
The map moves in the corresponding direc-
tion under the crosshair.
i Enter a destination using the map
(Y page 64). 54
IntroductionNavigation

Basic settings
Selecting the route type
X
To switch to navigation mode: press the
00BE button.
X To show the menu: slide6the controller.
X To select Options
Options: turn and press the con-
troller.
X Select Route Settings
Route Settings.
X Select a route type.
A filled circle indicates the current selection.
R Active route guidance: the multimedia sys-
tem calculates a new route.
R Inactive route guidance: the multimedia
system uses the selection as the new set-
ting.
i Route guidance active: a destination has
been entered and the route has been calcu-
lated.
Route guidance inactive: no destination has
been entered yet and no route has been cal-
culated yet. Fast Fast
Route
Route The multimedia system cal-
culates a route with a short
travel time.
Dynamic Dynamic
Traffic Traffic
Route Route Based on the
Fast Route
Fast Route
route type and includes traf-
fic reports on the route for the
route guidance. Eco Route Eco Route The multimedia system cal-
culates an economical route.
The journey may take slightly
longer compared to taking
the fast route. Short Short
Route Route The multimedia system cal-
culates a short distance
route. The
Dynamic Traffic Route Dynamic Traffic Route route type uses
real-time traffic reports from SIRIUS satellite
radio.
Further Information on real-time traffic reports
(Y page 77).
X To calculate alternative routes: select
Calculate Alternative Routes Calculate Alternative Routes .
Switch the function on 0073or off 0053.
Function activated: after each route calcula-
tion, route alternatives are offered that cor-
respond to the local conditions (Y page 75).
If desired, you can have the multimedia sys-
tem calculate alternative routes even during
route guidance (Y page 75). Setting route options
X
To avoid/use route options: selectAvoid Avoid
Options
Options.
A menu appears.
X Select one of the options.
0073: using or avoiding route options is enabled
0053: using or avoiding route options is disabled
R Menu item Avoid Area Avoid Area (Ypage 85)
The multimedia system enables you to avoid
areas you do not wish to drive through.
R Menu item Avoid Highways Avoid Highways
R Menu item Avoid Ferries
Avoid Ferries
R Menu item Avoid Auto Trains
Avoid Auto Trains
R Menu item Avoid Tunnels
Avoid Tunnels
R Menu item Avoid Unpaved Roads
Avoid Unpaved Roads
The function is not available in all countries.
R Menu item Use Toll Roads
Use Toll Roads
The route calculation includes roads which
require you to pay a usage fee (toll).
R Menu item Use Carpool Lanes Use Carpool Lanes
If your vehicle meets the access conditions
for carpool lanes, you can use this function. Basic settings
55Navigation Z

system is able to guide you to a destination even
from an off-road location.
At the start of route guidance, you will see the
Road Not Mapped
Road Not Mapped message, an arrow and the
distance to the destination. The arrow shows
the compass heading to the actual destination.
As soon as the vehicle is back on a road known
to the system, route guidance continues in the
usual way.
Off-road during route guidance Due to road construction, for example, there
may be differences between the data on the
digital map and the actual course of the road.
In such cases, the system will temporarily be
unable to locate the vehicle position on the dig- ital map. The vehicle is therefore in an off-road
position.
In the display, you will then see the Road Not
Road Not
Mapped Mapped message, an arrow and the distance to
the destination. The direction arrow shows the
compass heading to the destination.
As soon as the system can assign the vehicle
position to the map again, route guidance con-
tinues in the usual way. Real-time traffic reports
Prerequisites
This function is currently not available for Can-
ada.
In order to receive real-time traffic reports via
satellite radio, you need to subscribe to SIRIUS
XM Satellite Radio Traffic Message Service.
Further information on satellite radio
(Y page 136).
The multimedia system can receive traffic
reports via satellite radio and take account of
these for route guidance in the navigation sys-
tem. Received traffic reports are displayed on
the map either as text or as symbols. Real-time traffic reports on the map
The multimedia system can show certain traffic
incidents on the map with symbols (type of inci-
dent) and colored lines (extent). Traffic reports
are shown on the map at scales of 1/32 mi to
20 mi.
When 0043is displayed, traffic reports can be
received or traffic reports are available. If it is
not displayed, no reception is possible.
X To hide the menu: slide5and press the
controller.
The map can be seen in the full-screen dis-
play.
X To set the map scale: turn the controller
until the desired map scale is selected. 0043
Traffic jam on the route
0044 Slow-moving traffic on the route
0087 Road blocked
0085 Traffic jam
0083 Traffic warning
0084 Dashed red and white line delimiting the
traffic warning
006B Road block (crosses along the affected
road)
006C Slow-moving traffic (orange line along the
affected route)
006D Traffic jam (red line along the affected route) Real-time traffic reports
77Navigation Z

X
To switch an area to avoid on/off: select an
area by turning and pressing the controller.
The area will be avoided 0073or not 0053.
X To display/change an area: mark an area by
turning the controller.
X Slide 9the controller.
X To select Display/Change
Display/Change: press the con-
troller.
The map with the crosshair appears.
The area currently blocked is displayed as a
red square.
X To move the area to a new location: slide
1, 4,2the controller.
X To change the size of the area: press the con-
troller.
X Turn the controller.
X To accept changes: press the controller.
A message appears stating that the area has
been set.
Deleting one/all areas X
To switch to navigation mode: press the
00BE button.
X To show the menu: slide6the controller.
X To select Options
Options: turn and press the con-
troller.
X Select Route Settings
Route Settings.
X Select Avoid Options Avoid Options.
X Select Avoid Area
Avoid Area.
A list appears.
X To delete an area: mark an area by turning
the controller.
X Slide 9the controller.
X Select Delete
Delete orDelete All
Delete All .
A prompt appears asking whether you wish to
delete the area.
X Select Yes
Yes orNo
No.
After selecting Yes
Yes, the area is deleted.
X To delete all areas: when the list appears,
slide 9 the controller.
X Select Delete All
Delete All .
A prompt appears asking whether you wish to
delete all areas.
X Select Yes
Yes orNo
No.
After selecting Yes
Yes, all areas are deleted. SIRIUS XM service
Displaying SIRIUS XM service informa-
tion You can display the SIRIUS XM service informa-
tion.
X To switch to navigation mode: press the
00BE button.
X To show the menu: slide6the controller.
X To select Traffic Traffic: turn and press the con-
troller.
X Select SIRIUS Service
SIRIUS Service.
The provider's phone number (SIRIUS XM)
and the serial number of your service module
are displayed.
i Alternatively you can call up this function
using the touchpad (Y page 24).
Registering for the SIRIUS XM traffic
report service X
Call the provider telephone number shown on
the multimedia system display.
i You can also have the satellite service acti-
vated online. To do so, visit the SIRIUS XM
Radio website at http://www.sirius.com
(USA).
X The connection is established: follow the
service employee's instructions.
The activation process may take up to ten
minutes.
i If registration is not included when purchas-
ing the system, your credit card details will be
required to activate your account. Updating the digital map
Introduction The digital maps generated by the map software
become outdated in the same way as conven-
tional road maps. Optimal route guidance can
only be provided by the navigation system in
conjunction with the most up-to-date map soft- ware.
Information about new versions of the digital
map can be obtained from an authorized
Mercedes-Benz Center. You can have the digital
map updated there using a data medium, or you can update it yourself. 86
Map functionsNavigation

Your multimedia system equipment
These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specific differences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual. Switching on the radio
X Press the 002Abutton.
The radio display appears. You will hear the
last station played on the last waveband
selected. Switching HD Radio on/off
X In radio mode: slide 6the controller.
X To select Options Options: turn and press the con-
troller.
X By selecting 0073or0053 in front of HD Radio
HD Radio,
you determine whether HD radio is switched
on or off.
If HD Radio is switched off, the system does not switch to digital radio and it is not possible to
select any sub-channels.
i HD Radio™ and the HD, HD Radio, and “Arc”
logos are proprietary trademarks of iBiquity
Digital Corp. Overview
0043
Main function bar
0044 Status bar with compass display
0087 Main display field with available stations and
relevant information
0085 Display of radio station selected
0083 Radio menu bar
The following functions are available using
the radio main function bar:
R HD Radio FM HD Radio FM : HD FM radio mode
R HD Radio AM HD Radio AM : HD MW radio mode
R Sat Radio
Sat Radio: satellite radio
R Radio Station Presets
Radio Station Presets: 100 preset posi-
tions for radio stations
R Info on Radio
Info on Radio: information on radio in the
Digital Operator's Manual
The following functions are available using
the radio menu bar:
R Options Options: radio options
R 00D3: searches for stations by name
R Preset
Preset : station presets menu
R Band
Band : selects wavebands
R Info
Info : displays additional information about
the current station (radio text)
R à: sound settings, Burmester ®
sound Setting the waveband
Button activation
X Press the 002Abutton.
A menu appears with a selection of HD
HD
Radio FM
Radio FM ,HD Radio AM
HD Radio AM ,Sat Radio
Sat Radio ,Info
Info
on Radio
on Radio andRadio Station Presets
Radio Station Presets.
X To select the required waveband: turn and
press the controller. 132
Set
ting the wavebandRadio

Using the main function bar
X In radio mode: slide 5the controller.
The radio main function bar and menu bar
appear. Radio
Radio is active.
X Press the controller.
A menu appears with a selection of HD HD
Radio
Radio FM
FM,HD
HD Radio
Radio AM
AM,Sat
Sat Radio
Radio ,Radio
Radio
Station Presets
Station Presets andInfo on Radio
Info on Radio.
X To select the required waveband: turn and
press the controller. Using the menu bar
X In radio mode: slide 6the controller.
The radio menu bar appears.
X To select Band
Band: turn and press the controller.
A menu appears with a selection of HD
HD
Radio FM
Radio FM, HD Radio AM
HD Radio AM andSat Radio
Sat Radio.
X To select the required waveband: turn and
press the controller. Station
Selecting a station
Using the main display field All currently available stations are displayed.
X In radio mode, turn the controller until the
desired station is in the center.
Using the current station list i
The station list is available in HD FM radio
mode or HD AM radio mode. It includes all
stations that can be received. X
In radio mode, press the controller.
The station list appears with the stations cur-
rently available.
X To select the desired station: turn and press
the controller.
Using direct entry X
In radio mode: slide 6the controller.
The radio menu bar appears.
X To select Options Options: turn and press the con-
troller.
X Select Direct Entry
Direct Entry.
An additional menu appears.
HD FM radio mode: X To select the HD
HDFM Frequency
FM Frequency option: turn
and press the controller.
X Enter the frequency of the desired station in
the entry field.
HD MW radio mode: X To select the HD HDAM Frequency
AM Frequency option: turn
and press the controller.
X Enter the frequency of the desired station in
the entry field.
Satellite radio mode: X To select the SatRadio SatRadioChannel
Channel option: turn
and press the controller.
X Enter the number of the desired channel in
the entry field.
Station presets: X To select the Radio Station Presets Radio Station Presets
option: turn and press the controller.
X Enter the station preset of the desired station. Station
133Radio

Using the search function
X
In radio mode: slide 6the controller.
The radio menu bar appears.
X Select 00D3and enter the first letters of the
required station using the controller.
X Press OK
OKto confirm.
The multimedia system displays a list of avail-
able stations.
X To select stations from the list: turn the con-
troller and press to confirm.
Using the preset position X
In radio mode: slide 6the controller.
X To select Preset
Preset : turn and press the control-
ler.
X To select Enter Preset Enter Preset : turn and press the
controller.
X Enter the station preset of the desired station. Station list
X In radio mode, press the controller.
The station list appears with the stations cur-
rently available. Saving/deleting a station
Storing current stations
X In radio mode: slide 6the controller.
The radio menu bar appears.
X To select Preset Preset: turn and press the control-
ler.
X To select the Save
SaveCurrent
Current Station/Chan‐
Station/Chan‐
nel
nel option: turn and press the controller.
X To select the position of the required preset
entry: turn and press the controller. or
X Select the Edit Station Preset
Edit Station Preset option.
X Select the position of the required preset:
turn the controller.
This can also be a preset position that is
already occupied, which is then overwritten
by the current station.
X Slide 9the controller.
An additional menu appears.
X To select the Save SaveCurrent
Current Station/Chan‐
Station/Chan‐
nel
nel option: turn and press the controller.
The currently set station is stored in the selec-
ted preset position. A tone signals a success-
ful preset entry.
or X In the main display field, press and hold the
controller.
A list of current allocated preset positions
appears.
X To select the position of the required preset
and confirm: turn the controller and press.
Moving highlighted stations X In radio mode: slide 6the controller.
The radio menu bar appears.
X To select Preset Preset: turn and press the control-
ler.
X Select Edit Station Preset
Edit Station Preset .
X To select the required preset entry: turn the
controller.
X Slide 9the controller.
An additional menu appears.
X To select the Move Highlighted Station/ Move Highlighted Station/
Channel
Channel option: turn and press the control-
ler.
The list of stored stations appears again.
X To move the highlighted station to the new
position: turn the controller and press to con-
firm.
Deleting highlighted stations
X In radio mode: slide 6the controller.
The radio menu bar appears.
X To select Preset Preset: turn and press the control-
ler.
X Select Edit Station Preset Edit Station Preset .
X To select the required preset entry: turn the
controller. 134
StationRadio

X
Slide 9the controller.
X To select the Delete Highlighted Sta‐
Delete Highlighted Sta‐
tion/Channel
tion/Channel option in the additional menu:
turn and press the controller.
X To select Yes
Yes: turn and press the controller.
The highlighted station is deleted.
or X To select No
No: turn and press the controller.
The process is canceled.
i Frequencies have already been stored in the
multimedia system. There are 100 preset
positions available. Activating/deactivating the station
presets display
You can use this function to change to the sta-
tion presets display.
Activating
X In radio mode: slide 6the controller.
X To select Preset
Preset: turn and press the control-
ler.
X To select Station Preset View: On Station Preset View: On: turn
and press the controller.
The station preset display appears.
X To switch between the stored stations: turn
the controller.
Deactivating
X In radio mode: slide 6the controller.
X To select Preset
Preset: turn and press the control-
ler.
X To select Station
Station Preset PresetView:
View:Off
Off : turn
and press the controller.
A view of the last waveband you listened to
appears. Tagging music tracks
If an Apple ®
device is connected, the music
tracks and artist displayed in the radio text can be stored. You have the option of purchasing
this track using iTunes Store ®
. Not all radio sta-
tions support this function. X
In radio mode: slide 6the controller.
The radio menu bar appears.
X To select Options
Options: turn and press the con-
troller.
X Select Tag This Track Tag This Track.
A message appears about storing the track
information. Displaying station information
X In radio mode: slide 6the controller.
The radio menu bar appears.
X To select Options Options: turn and press the con-
troller.
X You can determine whether or not the artist,
track or station name are shown in the main
display area with 0073or0053 before Show ShowSta‐
Sta‐
tion Information
tion Information. Calling up sound settings
X In radio mode: slide 6the controller.
The radio menu bar appears.
X To select à: turn and press the controller.
The sound menu appears (Y page 165). Displaying information
This function is available in HD FM radio and HD
AM radio mode.
Reception is only possible if the radio stations
provide the relevant information.
X In radio mode: slide 6the controller.
X To select Info Info: turn and press the controller.
Information on the currently received pro-
gram is displayed. Displaying information
135Radio