2017 MAZDA MODEL MX-5 RF warning

7–40
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Signal Warning
Blind Spot
Monitoring (BSM)
OFF Indicator
Light
*
A problem in the system may be indicated under the following conditions.
Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda
Repairer.
The light does not turn on when the ignition is switched ON. The light remains on even when the Blind Spot Monitoring (BSM) system can be operated. The light turns on while driving the vehicle.
NOTE
If the vehicle is driven on a road with less traf¿ c and few vehicles that the radar sensors
can detect, the system may pause (The Blind Spot Monitoring (BSM) OFF indicator
light in the instrument cluster illuminates). However, it does not indicate a malfunction.
Retractable
Fastback Warning
Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspected
by an expert repairer, we recommend an Authorised Mazda Repairer.
LED Headlight
Warning Light This light illuminates if there is a malfunction in the LED headlight. Have your vehicle
inspected by an expert repairer, we recommend an Authorised Mazda Repairer.
/:A(.'',A'FKVKQPKPFD

7–41
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Taking Action
Take the appropriate action and verify that the warning light turns off.
Signal Warning Action to be taken
Seat Belt Warning Light The seat belt warning light turns on if the driver
or passenger's seat is occupied and the seat belt
is not fastened with the ignition switched ON.
If the driver or passenger's seat belt is unfastened
(only when the passenger seat is occupied) and
the vehicle is driven at a speed faster than about
20 km/h (12 mph), the warning light À ashes.
After a short time, the warning light stops
À ashing, but remains illuminated. If a seat belt
remains unfastened, the warning light À ashes
again for a given period of time.
NOTE
If the driver or passenger's seat belt is
unfastened after the warning light turns on,
and the vehicle speed exceeds 20 km/h (12
mph), the warning light À ashes again.
(With passenger occupant classi¿ cation
system)
To allow the passenger occupant
classi¿ cation sensor to function properly,
do not place and sit on an additional seat
cushion on the passenger's seat. The sensor
may not function properly because the
additional seat cushion could cause sensor
interference.
(Without passenger occupant
classi¿ cation system)
Placing heavy items on the passenger's
seat may cause the passenger's seat belt
warning function to operate depending on
the weight of the item.
To allow the passenger's seat weight
sensor to function properly, do not place
and sit on an additional seat cushion
on the passenger's seat. The sensor
may not function properly because the
additional seat cushion could cause sensor
interference.
If a small child is seated on the passenger's
seat, the warning light may not operate. Fasten the seat belts.
Door-Ajar/Boot lid-Ajar
Warning Indication/
Warning Light The light turns on if any door/boot lid is not
closed securely. Close the door/boot lid securely.
/:A(.'',A'FKVKQPKPFD

7–42
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Signal Warning Action to be taken
Low Fuel Warning Light The light turns on when the remaining fuel is
about 9.0 L (2.3 US gal, 1.9 Imp gal).
NOTE
The light illumination timing may vary
because fuel inside the fuel tank moves
around according to the driving conditions
and the vehicle posture. Add fuel.
120km/h Warning Light *
The 120 km/h warning light illuminates when
the vehicle speed exceeds 120 km/h. Lower the vehicle speed.
Low Washer Fluid Level
Warning Indication/
Warning Light
*
This warning light indicates that little washer
À uid remains. Add washer À uid (page 6-23 ).
/:A(.'',A'FKVKQPKPFD

7–43
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Tyre Pressure Monitoring System Warning Light (Illuminate) *
Take the appropriate action and verify that the warning light turns off.
Vehicle with conventional tyres
Warning Action to be taken
When the warning light illuminates, and the warning
beep sound is heard (about 3 seconds), tyre pressure is
too low in one or more tyres.
WARNING
If the tyre pressure monitoring system warning
light illuminates or À ashes, or the tyre pressure
warning beep sound is heard, decrease vehicle
speed immediately and avoid sudden manoeuvring
and braking:
If the tyre pressure monitoring system warning
light illuminates or À ashes, or the tyre pressure
warning beep sound is heard, it is dangerous to
drive the vehicle at high speeds, or perform sudden
manoeuvring or braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak or a À at, pull
over to a safe position where you can check the
visual condition of the tyre and determine if you
have enough air to proceed to a place where air
may be added and the system monitored again by
an expert repairer, we recommend an Authorised
Mazda Repairer or a tyre repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is dangerous,
even if you know why it is illuminated. Have the
problem taken care of as soon as possible before it
develops into a more serious situation that could
lead to tyre failure and a dangerous accident. Inspect the tyres and adjust to the speci¿ ed inÀ ation
pressure (page 6-34 ).
NOTE
Perform tyre pressure adjustment when the tyres
are cold. Tyre pressure will vary according to the
tyre temperature, therefore let the vehicle stand
for 1 hour or only drive it 1.6 km (1 mile) or less
before adjusting the tyre pressures. When pressure
is adjusted on hot tyres to the cold inÀ ation
pressure, the TPMS warning light/beep may turn
on after the tyres cool and pressure drops below
speci¿ cation.
Also, an illuminated TPMS warning light,
resulting from the tyre air pressure dropping due to
cold ambient temperature will remain illuminated
even if the ambient temperature rises. In this
case, it will also be necessary to adjust the tyre air
pressures. If the TPMS warning light illuminates
due to a drop in tyre air pressure, make sure to
check and adjust the tyre air pressures.
Tyres lose air naturally over time and the TPMS
cannot tell if the tyres are getting too soft over
time or you have a À at. However, when you ¿ nd
one low tyre in a set of four-that is an indication
of trouble; you should have someone drive the
vehicle slowly forward so you can inspect any low
tyre for cuts and any metal objects sticking through
tread or sidewall. Put a few drops of water in the
valve stem to see if it bubbles indicating a bad
valve. Leaks need to be addressed by more than
simply reinÀ ating the tyre as leaks are dangerous
— take it to an expert repairer, we recommend an
Authorised Mazda Repairer.
/:A(.'',A'FKVKQPKPFD

7–44
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Vehicle with run-À at tyres
Warning Action to be taken
When the warning light illuminates, and the warning
beep sound is heard when tyre pressure is too low in
one or more tyres.
WARNING
If the tyre pressure monitoring system warning
light illuminates or À ashes, or the tyre pressure
warning beep sound is heard, decrease vehicle
speed immediately and avoid sudden manoeuvring
and braking:
If the tyre pressure monitoring system warning
light illuminates or À ashes, or the tyre pressure
warning beep sound is heard, it is dangerous to
drive the vehicle at high speeds, or perform sudden
manoeuvring or braking. Vehicle drivability could
worsen and result in an accident.
To determine if you have a slow leak or a À at, pull
over to a safe position where you can check the
visual condition of the tyre and determine if you
have enough air to proceed to a place where air
may be added and the system monitored again by
an expert repairer, we recommend an Authorised
Mazda Repairer or a tyre repair station.
Do not ignore the TPMS Warning Light:
Ignoring the TPMS warning light is dangerous,
even if you know why it is illuminated. Have the
problem taken care of as soon as possible before it
develops into a more serious situation that could
lead to tyre failure and a dangerous accident. Inspect the tyres and adjust to the speci¿ ed inÀ ation
pressure (page 6-34 ).
CAUTION
When replacing/repairing the tyres or wheels or both,
have the work done by an Authorised Mazda Repairer,
or the tyre pressure sensors may be damaged.
NOTE
Perform tyre pressure adjustment when the tyres are
cold. Tyre pressure will vary according to the tyre
temperature, therefore let the vehicle stand for 1
hour or only drive it 1.6 km (1 mile) or less before
adjusting the tyre pressures. When pressure is
adjusted on hot tyres to the cold inÀ ation pressure,
the TPMS warning light/beep may turn on after the
tyres cool and pressure drops below speci¿ cation.
Also, an illuminated TPMS warning light, resulting
from the tyre air pressure dropping due to cold
ambient temperature, may turn off if the ambient
temperature rises. In this case, it will also be necessary
to adjust the tyre air pressures. If the TPMS warning
light illuminates due to a drop in tyre air pressure,
make sure to check and adjust the tyre air pressures.
After adjusting the tyre air pressures, it may require
some time for the TPMS warning light to turn off. If
the TPMS warning light remains illuminated, drive
the vehicle at a speed of at least 25 km/h (16 mph)
for 10 minutes, and then verify that it turns off.
Tyres lose air naturally over time and the TPMS
cannot tell if the tyres are getting too soft over time or
you have a À at. However, when you ¿ nd one low tyre
in a set of four-that is an indication of trouble; you
should have someone drive the vehicle slowly forward
so you can inspect any low tyre for cuts and any metal
objects sticking through tread or sidewall. Put a few
drops of water in the valve stem to see if it bubbles
indicating a bad valve. Leaks need to be addressed
by more than simply re¿ lling the trouble tyre as leaks
are dangerous — take it to an expert repairer, we
recommend an Authorised Mazda Repairer which
has all the equipment to ¿ x tyres, TPMS systems and
order the best replacement tyre for your vehicle.
If the warning light illuminates again even after the tyre
pressures are adjusted, there may be a tyre puncture.
Refer to Vehicle with Run-À at Tyres on page 7-3 .
/:A(.'',A'FKVKQPKPFD

7–45
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
KEY Indication (White)/KEY Warning Light (Red) *
Take the appropriate action and verify that the warning light turns off.
Signal Cause Action to be taken
(White)
KEY Indication *
The advanced key battery is dead. Replace the key battery (page 6-31 ).
(Red)
(Flashing)
KEY Warning Light
*
(Red)
(Flashing)
KEY Warning Light
*
The advanced key is not within the
operation range.
Bring the advanced key into the operation
range (page 3-8 ). The advanced key is placed in areas inside
the cabin where it is dif¿ cult for the key to
be detected.
A key from another manufacturer similar to
the advanced key is in the operation range. Take the key from another manufacturer
similar to the advanced key out of the
operation range.
Without the ignition switched off, the
advanced key is taken out of the cabin, and
then all the doors are closed. Bring the advanced key back into the
cabin.
/:A(.'',A'FKVKQPKPFD

7–46
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Message Indicated in Multi-information Display *
I f t h e r e i s a n o t i¿ cation from the vehicle, a message is displayed in the multi-information
display. Check the information and take the necessary action.
(Display example)
If the warning light turns on/À ashes simultaneously or a symbol is indicated in the display,
check the information regarding the warning light or symbol. (page 4-42 )
Display Content Action to be taken
Indicated when the push button start is
pressed while the shift lever is not in
the P position. Shift the shift lever to the P position.
Indicated when a seat belt is
unfastened and the driver's door is
opened while the i-stop function is
operating. Press the push button start again
to start the engine. For automatic
transmission vehicles, shift the shift
lever to the P position before starting
the engine.)
Indicated when the push button start is
pressed without depressing the brake
pedal. Depress the brake pedal and press the
push button start.
Indicated when the push button start is
pressed without depressing the clutch
pedal. Depress the clutch pedal and press the
push button start.
Indicated while the steering wheel is
locked. Release the steering lock.
/:A(.'',A'FKVKQPKPFD

7–47
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Message Indicated on Display *
If a message is displayed in the centre display (Type B/type C audio), take appropriate
action (in a calm manner) according to the displayed message.
(Display example)
Stop Vehicle in Safe Place Immediately
If the following messages are displayed in the centre display (Type B/type C audio), a
vehicle system may be malfunctioning. Stop the vehicle in a safe place and contact an
Authorised Mazda Repairer.
Display Indicated Condition
Displays if the engine coolant temperature has increased
excessively.
Displays if the charging system has a malfunction.
/:A(.'',A'FKVKQPKPFD