2017 MAZDA MODEL CX-5 Smart Start Guide (in English)

m{zd{ cx-5 24
VOICE CONTROL
Voice control is activated by pushing the TALK button on the steering wheel and
speaking a command. Voice commands usually contain a verb (action word) followed by
a noun. Common verbs are “Go to” and “Play”.
USEFUL COMMANDS:
“CALL ” (Example: “Call John Smith mobile”)
“DIAL ” (Example: “Dial 911”)
“REDIAL” – This command makes a call to the last person you called (the top
person listed on Outgoing call history). “CALLBACK” – This command makes a call
to the last person who called you (the top
person listed on Incoming call history).
“DRIVE HOME” /
“NAVIGATE HOME” / “TAKE ME HOME” Any of these HOME commands sets the destination to your home address (p. 23).
NOTE: Navigation commands are available only when Navigation map is displayed.
OTHER COMMON VOICE COMMANDS:
“ HELP” - This command lets you know the available VR commands per display.
“ TUTORIAL” - Mazda Connect overall introduction.
“ ADDRESS” - This is a useful command for navigation address entry.
IMPORTANT:
• Make sure to say your command AFTER the beep sound.
• You can skip the system’s prompt anytime by pushing the TALK
button.
• You can end your voice recognition session either by pushing the Hang-up
button
on the steering wheel or by operating the commander switch.
COMMANDER SWITCHVOICE CONTROL
Talk
Voice Control Switch
2364256 17a CX-5 SSG 030117.indd 243/1/17 5:51 PM

25 MAZDAUSA.COM
MAZDA RADAR CRUISE CONTROL (MRCC)
WITH STOP & GO FUNCTION
The MRCC with Stop & Go function maintains vehicle speed and
following distance using a radar sensor to detect a vehicle ahead.
The driver simply presets the vehicle speed between 0 mph and 90 mph and the system will maintain a safe following distance
without having to turn the cruise control off or use the accelerator
or brake pedals. If the vehicle ahead stops while you are following behind it, your vehicle will stop automatically.
The system operates in two modes: CONSTANT SPEED MODE: When no
vehicle is detected ahead, the driver’s set
speed is maintained.
HEADWAY CONTROL MODE: When a vehicle is detected ahead, a distance between your
vehicle and the vehicle ahead is maintained.
Setting the MRCC with Stop & Go function: When the Mode switch is pushed, the vehicle speed and the distance between vehicles while in headway control can be set. The MRCC
with Stop & Go function indication is shown in the multi-information
display. The indicator light in the multi-information display will be
green and will turn on simultaneously.
NOTE: The radar for the MRCC with Stop & Go function is located behind the Mazda
emblem in the grille. Keep this area clean to ensure the system works properly.
How to set the speed:
1 Adjust the vehicle to the desired speed using the accelerator pedal.
2 Push the SET + or SET – switch. The set speed and the inter-vehicle distance display filled
with white lines are displayed in the multi-information display
and the MRCC indicator light
(green) turns on simultaneously.
3
Push the center of the RESUME switch to resume set speed.
Vehicle ahead
MRCC Distance
between vehicle
MRCC Set
vehicle speed
MAZDA RADAR CRUISE CONTROL
WITH STOP & GO FUNCTION (IF EQUIPPED)
MODE DISPLAY
Constant Speed
Headway Control
WARNING:
Switch the MRCC
system off when it is not in use.
DO NOT get out
of the vehicle while the stop hold control
is operating.
WARNING:
Do not rely
completely on the MRCC with Stop
& Go function and always drive
carefully obeying the speed limit.
2364256 17a CX-5 SSG 030117.indd 253/1/17 5:51 PM

m{zd{ cx-5 26
How to set the distance between vehicles:
The distance between vehicles is increased by pushing the
switch and decreased by pushing the switch. The
distance between vehicles can be set to four levels.
Switching to conventional cruise control function: When the Mode switch is pushed while the MRCC with Stop
& Go function system is turned on, the system is switched to conventional cruise control function.
The MRCC with Stop & Go function indicator light (green) in the instrument cluster turns off and “Radar Cruise Control
deactivated” message is displayed in the multi-information
display at the same time.
CLOSE PROXIMITY WARNING While traveling in headway control, if your
vehicle rapidly closes in on a vehicle ahead because the other driver applied his or her
brakes suddenly, a warning sound activates and the BRAKE! warning is indicated in the
display. Always verify the safety of the surrounding area and depress the brake pedal while keeping a safe distance from the vehicle ahead. Additionally, always keep a safe distance
from the vehicles behind you.
NOTE: The MRCC with Stop & Go function sometimes will brake your vehicle when
encountering a semi truck (tractor trailer). This is normal. Simply push the accelerator pedal to override the system.
MAZDA RADAR CRUISE CONTROL
WITH STOP & GO FUNCTION (IF EQUIPPED)
CANCEL/OFF
Distance Control
(Longer /
Shorter )
MODE (ON)
Cruise
Control (SET+ /
RESUME/
SET –)
MRCC with Stop & Go
function Set Switch
DISTANCES BETWEEN
VEHICLES
(at 50 mph) DISPLAY
Long
(about 164 ft)
Medium (about 131 ft)
Short
(about 98 ft)
Extremely Short
(about 82 ft)
2364256 17a CX-5 SSG 030117.indd 263/1/17 5:51 PM

27 MAZDAUSA.COM
WARNING:
SCBS is only a
supplementary
system to reduce
damage in the event of a
collision; however, the SCBS has limitations. Do
not rely solely on the SCBS. Always keep your eyes
on the road.
SMART CITY BRAKE SUPPORT
(IF EQUIPPED)
SMART CITY BRAKE SUPPORT (SCBS) SYSTEM
Between speeds of 2 mph to 18 mph, the Smart City Brake Support
attempts to minimize damage if a collision is unavoidable. In some instances, SCBS may be able to stop the vehicle automatically to
avoid a collision with the vehicle ahead.
Partial list of operating conditions: • During vehicle speeds of 2 mph to 18 mph.
•
SCBS system has not been turned off.
NOTE: It may be possible to avoid a collision if the relative speed
between your vehicle and the vehicle ahead is less than 12 mph.
Refer to your Owner’s Manual for a complete list of SCBS operating
conditions and system details.
SAFETY SETTINGS
SCBS can be turned off using Safety Settings in MAZDA CONNECT (p. 15).
Camera sensor
2364256 17a CX-5 SSG 030117.indd 273/1/17 5:51 PM

m{zd{ cx-5 28
SMART BRAKE SUPPORT (SBS)
At speeds of 10 mph or higher, the Smart Brake Support (SBS) alerts the driver of a possible collision and attempts to reduce the severity of an imminent collision with the vehicle ahead. SBS
operates when the vehicle is traveling at speeds higher than the range of the SMART CITY BRAKE SUPPORT (SCBS).
Partial list of operating conditions: •
During vehicle speeds of 10 mph or higher.
•
The Smart Brake Support (SBS) system has not been turned off.
SBS system can be turned off using Safety Settings in
MAZDA CONNECT (p. 15).
Refer to your Owner’s Manual for a complete list of SBS operating
conditions and system details.
COLLISION WARNINGIf there is the possibility of a collision with a vehicle
ahead, the beep sounds continuously and a warning is indicated in the multi-information display.

Camera sensor
Radar sensor
WARNING:
SBS is only a
supplementary
system to reduce
damage in the event of a
collision; however, the SBS has limitations. Do
not rely solely on the SBS. Always keep your eyes
on the road.
SMART BRAKE SUPPORT
(IF EQUIPPED)
2364256 17a CX-5 SSG 030117.indd 283/1/17 5:51 PM

29 MAZDAUSA.COM
LANE-kEEP ASSIST SYSTEM /
LANE DEPARTURE WARNING SYSTEM
(IF EQUIPPED)
LANE-kEEP ASSIST SYSTEM (LAS) and
LANE DEPARTURE WARNING SYSTEM (LDWS)
The Lane-keep Assist System and Lane Departure Warning System recognize the
painted lane lines using the Forward Sensing Camera (FSC) installed on the windshield.
If the vehicle deviates from its lane at speeds above 37 mph, the system alerts the driver to provide steering assistance and uses the following indications to help the driver stay
within the lines.
NOTE: The system operates in two modes, steering assistance ON and steering
assistance OFF (warning only). Steering assistance ON/OFF can be changed in MAZDA CONNECT (p. 15).
Forward Sensing Camera
2364256 17a CX-5 SSG 030117.indd 293/1/17 5:51 PM

m{zd{ cx-5 30
NOTE: Any driver vehicle input (e.g., turn signal, steering or
acceleration, hands off, Traction Control System switch off) will
cancel warning and steering assist.
The steering operation assist for the Lane-keep Assist System and Lane Departure Warning System can be turned off. Refer to the
Owner’s Manual for further information.
Use the LAS and LDWS switch to turn the system ON or OFF.WARNING:
The Lane
Departure Warning
System (LDWS) is
not an automatic
driving system.
• The recognition
ability of the
Lane Departure
Warning
System (LDWS)
is limited.
• Over-reliance
on the system
could lead to
an accident.
• Always stay
on course using
the steering
wheel and
drive with care.
LANE-kEEP ASSIST SYSTEM /
LANE DEPARTURE WARNING SYSTEM
(IF EQUIPPED)
INDICATOR LIGHT* ACTIVE DRIVING
DISPLAY MULTI-
INFORMATION DISPLAY CONDITION
The painted road lane lines are
not recognized OR one side
is recognized OR the vehicle speed is less than 37 mph.
**
Both side painted road lane
lines are recognized at vehicle speeds of 37 mph or more.
1: Warning (Flashes)
Warning is triggered when vehicle deviates from its lane (depending on personalization setting).
1. When equipped with Active Driving Display.
2. When not equipped with Active Driving Display.
2
: No Active Driving Display
OFF
indicator
turns on.LAS and LDWS OFF
* When the steering assistance is off, indicator light is NOT displayed.
** When the steering assistance is off, indicator light is NOT displayed.
LAS and LDWS Switch
2364256 17a CX-5 SSG 030117.indd 303/1/17 5:51 PM

31 MAZDAUSA.COM
DISTANCE RECOGNITION SUPPORT SYSTEM
(IF EQUIPPED)
Vehicle ahead
The distance area
between vehicles is
illuminated in white.
DISTANCE RECOGNITION SUPPORT SYSTEM (DRSS)
The Distance Recognition Support System (DRSS) measures the distance between
your vehicle and the vehicle ahead. DRSS uses a radar sensor (front) while the vehicle speed is 19 mph or faster and indicates a recommended distance to maintain between the vehicles. Furthermore, if your vehicle approaches a vehicle ahead more closely
than the appropriate distance to maintain between the vehicles, the vehicle ahead indication in the display is illuminated in white to advise the driver to keep a safe
distance from the vehicle ahead.
DISPLAY
DISTANCE BETWEEN
VEHICLES
(at 25 mph) About
82 ft About
66 ft About
49 ft About
33 ft
DISTANCE BETWEEN
VEHICLES
(at 50 mph) About
164 ft About
131 ft About
98 ft About
65 ft
2364256 17a CX-5 SSG 030117.indd 313/1/17 5:51 PM