2017 MAZDA MODEL CX-5 brake

4–110
When Driving
i-ACTIVSENSE
Excessive Speed Warning
If the vehicle speed exceeds the speed limit sign displayed in the activ\
e driving display,
the area around the speed limit sign fl ashes three times in amber and the warning sound is
activated three times at the same time. If the vehicle speed continues t\
o exceed the displayed
speed limit sign, the indication stops fl ashing and remains on. Check the surrounding
conditions and adjust the vehicle speed to the legal speed using the app\
ropriate operation
such as depressing the brake pedal.

While 60 mph is displayed
50 mph is displayed
Active driving display indication
Active driving display indication

The excessive speed warning is initially set to inoperable. If you want \
to activate the
excessive speed warning, change the setting in the personalization featu\
res. In addition, the
warning pattern and the warning activation timing differ depending on the setting contents.
Refer to Personalization Features on page 9-11 .
Warning pattern
   Off: The excessive speed warning is not activated.  Visual: The area around the speed limit sign displayed in the display fl ashes three times
in amber, and if the vehicle speed continues to exceed the displayed speed limit\
sign, the
indication stops fl ashing and remains on.
   Audio & Visual: The area around the speed limit sign displayed in the display fl ashes
three times in amber and the warning sound is activated three times at t\
he same time. If
the vehicle speed continues to exceed the displayed speed limit sign, th\
e indication stops
fl ashing and remains on.

CX-5_8FN1-EA-16L_Edition1.indb 1102016/12/12 10:06:07

4–112
When Driving
i-ACTIVSENSE
*Some models.
Distance Recognition Support System (DRSS) *
The Distance Recognition Support System (DRSS) measures the distance between your
vehicle and a vehicle ahead using a radar sensor (front) while the veh\
icle speed is about
30 km/h (19 mph) or faster, and if your vehicle approaches a vehicle ahead more closely
than what is appropriate for maintaining distance between the vehicles a\
ccording to the
vehicle speed, a notifi cation in the active driving display is indicated to advise you to keep \
a
safe distance from the vehicle ahead.
WARNING
Do not rely completely on the Distance Recognition Support System (DRSS) and always
drive carefully: The Distance Recognition Support System (DRSS) provides advice for safer driving and
notifi es the driver of a recommended, safer distance to maintain with a vehicle ahead.
The ability to detect a vehicle ahead is limited depending on the type of vehicle ahead,
the weather conditions, and the traffi c conditions. Therefore, if the accelerator and brake
pedals are not operated correctly it could lead to an accident. Always verify the safety of
the surrounding area and depress the brake pedal or accelerator pedal while keeping a
safer distance from vehicles ahead or on-coming vehicles.

NOTE
  The Distance Recognition Support System (DRSS) operates when all of th\
e following
conditions are met:
  The ignition is switched ON.  The Distance Recognition Support System (DRSS) is on.  The selector lever is in a position other than reverse (R).  The vehicle speed is 30 km/h or faster (19 mph or faster).   The objects which activate the system are 4-wheeled vehicles.  The Distance Recognition Support System (DRSS) may also operate in the\
presence of
motorcycles and bicycles.
  The Distance Recognition Support System (DRSS) system may not operate \
normally
under the following conditions:
  The Dynamic Stability Control (DSC) has a malfunction.  The vehicle ahead is traveling at an extremely slow speed.   The system does not operate with the following objects:   Vehicles approaching in the opposite direction.  Stationary objects (stopped vehicles, obstructions)

CX-5_8FN1-EA-16L_Edition1.indb 1122016/12/12 10:06:07

4–121
When Driving
i-ACTIVSENSE
*Some models.
Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
*
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system is designed to maintain headway control *1 with a vehicle ahead according
to your vehicle's speed using a radar sensor (front) to detect the dis\
tance to the vehicle ahead
and a preset vehicle speed without you having to use the accelerator or \
brake pedals.

*1 Headway Control: Control of the distance between your vehicle and the ve\
hicle ahead detected by the Mazda Radar Cruise Control (MRCC) system.

Additionally, if your vehicle starts closing in on the vehicle ahead such as if the \
vehicle
ahead brakes suddenly, a warning sound and a warning indication in the display are
activated simultaneously to alert you to maintain a suf fi cient distance between the vehicles.
If the vehicle ahead stops while you are following behind it, your vehic\
le will stop and be
held stopped automatically (stop hold control), and headway control wi\
ll resume when you
resume driving the vehicle such as by pressing the RES switch.
Also refer to the following before using the Mazda Radar Cruise Control \
with Stop & Go
function (MRCC with Stop & Go function).
   AUTOHOLD (page 4-75 )  Forward Sensing Camera (FSC) (page 4-156 )  Radar sensor (front) (page 4-162 )
WARNING
Do not rely completely on the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function):
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)
system is designed to reduce load on the driver, and although it maintains a constant
vehicle speed, or specifi cally, it maintains a constant distance between your vehicle and
the detected vehicle ahead according to your vehicle speed, the system has detection
limitations depending on the type of vehicle ahead and its conditions, the weather
conditions, and the road conditions. Additionally, the system may be unable to decelerate
suffi ciently to avoid hitting the vehicle ahead if the vehicle ahead applies the brakes
suddenly or another vehicle cuts into the driving lane, which could result in an accident.
Always drive carefully and verify the surrounding conditions and depress the brake pedal
or accelerator pedal while keeping a safer distance from vehicles ahead or on-coming
vehicles.

CX-5_8FN1-EA-16L_Edition1.indb 1212016/12/12 10:06:09

4–122
When Driving
i-ACTIVSENSE
Do not use the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) system in the following locations, using the Mazda Radar Cruise Control
with Stop & Go function (MRCC with Stop & Go function) system at the following
locations may result in an unexpected accident:
 General roads other than highways (Driving under these conditions using the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system
is not possible.)
 Roads with sharp curves and where vehicle traffi c is heavy and there is insuffi cient
space between vehicles.
 Roads where frequent and repetitive acceleration and deceleration occur (Driving under these conditions using the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) system is not possible).
 When entering and exiting interchanges, service areas, and parking areas of highways (If you exit a highway while headway control is in use, the vehicle ahead will no longer
be tracked and your vehicle may accelerate to the set speed).
 Slippery roads such as ice or snow-bound roads (Tires could spin causing you to lose vehicle control, or the stop hold control may not operate.)
 Long, descending slopes (to maintain distance between vehicles, the system automatically and continuously applies the brakes which could result in the loss of
brake power.)
 Slopes with a steep gradient (The vehicle ahead may not be detected correctly, your vehicle may slide while stopped by the stop hold control, and it may accelerate
suddenly after it starts moving.)

For safety purposes, switch the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) system off when it is not being used.
Do not get out of the vehicle while the stop hold control is operating: Getting out of the vehicle while the stop hold control is operating is dangerous as the
vehicle may move unexpectedly and result in an accident. Before getting out of the
vehicle, switch the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop
& Go function) system off , shift the selector lever to the P position, and apply the electric
parking brake (EPB).

CAUTION
If your vehicle is towed or you are towing something, switch the Mazda Radar Cruise
Control with Stop & Go function (MRCC with Stop & Go function) system off to prevent a
miss-operation.

CX-5_8FN1-EA-16L_Edition1.indb 1222016/12/12 10:06:09

4–123
When Driving
i-ACTIVSENSE
NOTE
  The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system does not detect the following as physical objects.
  Vehicles approaching in the opposite direction  Pedestrians  Stationary objects (stopped vehicles, obstructions)  If a vehicle ahead is traveling at an extremely low speed, the system may not detect it
correctly.
  During headway control travel, do not set the system for detection of two-wheeled
vehicles such as motorcycles and bicycles.
  Do not use the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop
& Go function) system under conditions in which close proximity warnings are frequently
activated.
  During headway control travel, the system accelerates and decelerates your vehicle in
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to\
close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.
  While the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system is in use, it does not cancel even if the selector lev\
er is operated and any
intended engine braking does not occur. If deceleration is required, lower the set speed or
depress the brake pedal.
  The sound of the automatic brakes operating may be heard, however, it does not indicate
a problem.
  The brake lights turn on while the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) automatic braking is operating, however\
.

CX-5_8FN1-EA-16L_Edition1.indb 1232016/12/12 10:06:10

4–125
When Driving
i-ACTIVSENSE
If there is a problem with the Mazda Radar Cruise Control with Stop & Go\
function (MRCC
with Stop & Go function) system, a message is displayed on the multi-in\
formation display.
Check the center display to verify the problem and then have your vehicl\
e inspected by an
Authorized Mazda Dealer.
Refer to Message Indicated on Display on page 7-37 .
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead because the vehic\
le ahead applies
the brakes suddenly while you are traveling in headway control, the warn\
ing sound
activates and the brake warning is indicated in the display. Always verify the safety of
the surrounding area and depress the brake pedal while keeping a safer d\
istance from the
vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.

Multi-information Display
Active Driving Display

NOTE
In the following cases, the warnings and brakes may not operate even if \
your vehicle starts
closing in on the vehicle ahead.
  You are driving your vehicle at the same speed as the vehicle ahead.  Directly after the Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) system has been set.
  Directly after the accelerator pedal is released.  Another vehicle cuts into the driving lane.
CX-5_8FN1-EA-16L_Edition1.indb 1252016/12/12 10:06:10

4–126
When Driving
i-ACTIVSENSE
Setting the System
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop \
& Go
function) system operates when all of the following conditions are met.\
  Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)  The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop \
& Go
function) is turned on.
   The brake pedal is not depressed.  The electric parking brake (EPB) is released (electric parking brake \
(EPB) indicator light
is turned off).
   There is no problem with the DSC.  All the doors are closed.  The driver's seat belt is fastened.  The selector lever is in the drive (D) position or manual (M) positi\
on (manual mode).
NOTE
  In the following cases, the Mazda Radar Cruise Control with Stop & Go function (MRCC
with Stop & Go function) system is canceled when the vehicle is traveli\
ng at 30 km/h
(20 mph) or less and “Mazda Radar Cruise Control disabled under 30 km/h (20 mph) ” is
displayed in the multi-information display.
  The Forward Sensing Camera (FSC) cannot detect target objects (There is problem
with the Forward Sensing Camera (FSC) or windshield is dirty).
  There is a problem with the stop hold control function.  There is a problem with the electric parking brake (EPB).   It may not be possible to set the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) system directly after starting the engine, while the DSC
operation is being checked.


CANCEL switchRES switch
OFF switch
switch switch
MODE switch
SET- switch
SET+ switch

CX-5_8FN1-EA-16L_Edition1.indb 1262016/12/12 10:06:10

4–130
When Driving
i-ACTIVSENSE
How to change the set vehicle speed
To accelerate/decelerate using the SET
switch
When you press the SET
switch, the
vehicle accelerates and when you press the
SET
switch, it decelerates.

Short press 1 km/h (1 mph)
Long press 10 km/h (5 mph)

NOTE
For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).

To increase speed using accelerator
pedal
Depress the accelerator pedal and press
and release the SET
switch or SET
switch at the desired speed. If the switch is
not operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.
CAUTION
The warnings and brake control do not
operate while the accelerator pedal is
depressed.

NOTE
   The setting speed can be changed by
operating the SET
switch or SET
switch during stop hold control.
   When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. For the set vehicle speed, check
the set vehicle speed indication in the
display.
   When depressing the accelerator pedal,
the inter-vehicle distance indication in
the display changes to the white-line
indication.

Canceling the system
When the following operations are
performed, the Mazda Radar Cruise
Control with Stop & Go function (MRCC
with Stop & Go function) system is
canceled, and the Mazda Radar Cruise
Control with Stop & Go function (MRCC
with Stop & Go function) set indicator
(green) switches to the Mazda Radar
Cruise Control with Stop & Go function
(MRCC with Stop & Go function) main
indicator (white) at the same time.
  The OFF/CAN switch is pressed.  The brake pedal is depressed.  The electric parking brake (EPB) is
applied.
   The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.
   Any of the doors is opened.  The driver's seat belt is unfastened.

CX-5_8FN1-EA-16L_Edition1.indb 1302016/12/12 10:06:12