2017 MAZDA MODEL CX-5 display

i-ELOOP*
The i-ELOOP system suppresses engine load used for generating power and improves
driveability and fuel economy by generating electricity with th e kinetic energy that is
generated when the vehicle slows down by applying the brakes or during engine braking.
Stores large amounts of electricity instantly and efficiently u ses the electricity for electrical
devices and accessories.
Variable
Voltage
alternator
CapacitorDC-DC Converter
CAUTION

High-current electricity flows through the fo llowing parts, therefore do not touch them.
 Variable voltage alternator
 DC-DC converter
 Capacitor
 If the capacitor is to be disposed of, always consult an expert repairer, we recommend an
Authorised Mazda Repairer.
For details, go to the following URL.
http://www.mazda.com/csr/environment/recycling
▼ i-ELOOP Control Status Display
The driver is noti
fied of the i-ELOOP
power generating status and the vehicle
conditions by the con trol status display.

The i-ELOOP power generating status is
displayed in the centre display.
Refer to Control Status Display on page
4-97.
▼ i-ELOOP Charging Display
If the engine is started after the vehicle has
not been driven for a long period of time,
an “i-ELOOP charging” message may be
indicated in the display.
Leave the engine idling and wait until the
message disappears.
NOTE
If the vehicle is driven while the message
is displayed, a beep sound is heard.
When Driving
i-ELOOP
4-94*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

If you turn the steering wheel while the
message is displayed, it will feel heavier
than normal, but this does not indicate an
abnormality. Stop the vehicle in a safe
location with the engine running and do
not attempt to turn the steering wheel. The
steering operation will return to normal
after the message is no longer displayed.
When Driving
i-ELOOP
4-95
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Fuel Economy Monitor*
For vehicles with type B audio, the Control Status, Fuel Consumption, and Effectiveness*1
are switched and displayed by operating each icon in the display.
In addition, after completing a trip, the total energy efficiency to date is displayed in the
ending display when the ending display is turned on.
1. Select the
icon on the home screen to display the applications screen.
2. Select the “Fuel Economy Monitor”.
3. Select the
icon at the bot tom left of the screen t o display the menu in t he lower part
of the screen.
4. Select the icon in the menu and perform the operation. Each i con operates as follows:
Indication on displayControl status
Hides the menu display.
Displays the application screen.
Switches the Fuel Economy Monitor in the order of
Control Status, Fuel Consumption, and Effective-
ness
*1.
Resets the fuel economy data.
Displays the following setting screen.
•Ending display on/off switching•On/off switching for function which synchronizes re-
set fuel economy data to trip meter (Trip A) (Type B
instrument cluster only)
*1 With i-stop function.
NOTE
The fuel economy monitor screen after the ignition is switched from ON to OFF is changed
to the original fuel economy monitor screen when the ignition is switched ON the next time.
When Driving
Fuel Economy Monitor
4-96*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Fuel Consumption Display
Information regarding the fuel economy is displayed.
Indication on display
Control status
Displays the fuel economy for the past 60 minutes.
•Displays the fuel economy every minute for the past 1
to 10 minutes.
•Displays the fuel economy every 10 minutes for the
past 10 to 60 minutes.
Displays the average fuel economy over the past 5
resets and after the current reset.
Calculates the average fu el economy every minute
after vehicle travel b egins, and displays it.
NOTE
•The fuel economy data can be reset by doing the following operation:
•Press the reset switch from the menu screen.
•When the function which synchronizes the fu el economy monitor and the trip meter is
on, reset trip A of the trip meter.
•Delete the average fuel economy information displayed in the trip computer.
•After resetting the fuel economy data, “-- -” is displayed while the average fuel economy
is calculated.
▼ Control Status Display
(With i-stop Function)
The i-stop operation status and the i-ELOOP power generating st atus are displayed.
Indication on displayControl status
With i-ELOOP system
Displays the level of electricity generated by regen-
erative braking.
Displays the amount of the electricity stored in the
rechargeable battery.
When Driving
Fuel Economy Monitor
4-97
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Indication on displayControl status
With i-ELOOP system
Displays the status of the electricity stored in the re-
chargeable battery and being supplied to the electrical
devices (whole vehicle in display is illuminated simul-
taneously).
Displays the accumu lated fuel economy.
With i-ELOOP system
Without i-ELOOP system
Displays the readiness st atus as to whether opera-
tion of the i-stop function is available.
Displays the operation readiness status of the i-stop
function on the vehicle side (engine, battery, and A/C)
using icon colouring. The blue colour indicates that the
i-stop function is ready to operate, and the grey colour
indicates that it is not ready for operation.
When Driving
Fuel Economy Monitor
4-98
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Indication on displayControl status
With i-ELOOP system
Without i-ELOOP system
Displays the i-stop functio n status while the vehicle
is stopped.
Indicates the operations required by the driver to
operate the i-stop function while it is not operating.
Displays the current amount of time that the i-stop
function has been operating and the accumulated
amount of time that it has been operating.
The i-stop function operation status is indicated by
the colour of the engine area. The colour is blue during
i-stop function operation, and grey when it is not oper-
ating.
When Driving
Fuel Economy Monitor
4-99
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Effectiveness Display
(With i-stop Function)
The actual performance of the energy efficiency is displayed.
Indication on display Control status
The leaf graphic grows according to the amount of
CO2 emissions reduced by the system effects. The cu-
mulative total amount of leaf growth is indicated in
terms of the number of tree graphics.
Displays the total drivin g distance which could be
extended by the operation of the i-stop function.
Displays the percentage of time that the vehicle was
stopped by the i-stop function operation out of the total
amount of time that the vehicle was stopped.
Displays the amount of ti me that the i-stop function
has operated.
Displays the total amount of time that the vehicle
was stopped.
▼ Ending Screen Display
If the ending display on the fuel economy monitor is on when th
e ignition is switched from
ON to OFF, the actual energy efficiency (with i-stop function) or the information regarding
the fuel economy (without i-stop function) is displayed.
When Driving
Fuel Economy Monitor
4-100
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Blind Spot Monitoring (BSM)*
The BSM is designed to assist the driver in checking the area to the rear of the vehicle on
both sides during lane changes by notifying the driver of the p resence of vehicles
approaching from the rear in an adjacent lane.
The BSM detects vehicles approaching from the rear while travel ling in the forward
direction at a speed of 30 km/h (19 mph) or faster and notifies the driver by turning on the
BSM warning indicator light and displaying the vehicle detectio n screen (vehicles with
multi-information display and active driving display).
If the direction indicator lever is operated to signal a turn in the direction in which the BSM
warning indicator light is illumi nated while the approaching vehicle is detected, the BSM
notifies the driver of possible danger by turning on the BSM wa rning indicator light, and by
activating the warning sound and the warning screen indicator display (vehicles with
multi-information display and active driving display).
The detection area on this system covers the driving lanes on b oth sides of the vehicle and
from the rear part of the front d oors to about 50 m (164 ft) behind the vehicle.
Detection areas
Your vehicle
WA R N I N G
Always check the surrounding area visually before making an actual lane change:
The system is only designed to assist you in checking for vehicles at your rear when making a
lane change. Due to certain limitations with
the operation of this system, the BSM warning
indicator light, the warning sound and the warning screen indicator display may not activate
or they might be delayed even though a vehicle is in an adjacent driving lane. Always make it
your responsibility as a driver to check the rear.
When Driving
i-ACTIVSENSE
*Some models.4-115
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2