2017 MAZDA MODEL CX-5 light

▼Displayable Range on the Screen
The images on the screen may be different from the actual conditions.
(Screen display)
Garnish
Bumper
(Actual view)
Object
Obstruction detection
indication in parking
sensor system
NOTE
•The displayable range varies depending on the vehicle and road conditions.
•The displayable range is limited. Objects under the bumper or around the bumper ends
cannot be displayed.
•The distance appearing in the displayed image is different from the actual distance
because the rear view parking camera is equipped with a specific lens.
•Images displayed on the monitor from the rear view parking camera are reversed images
(mirror images).
•Some optionally installed vehicle accessories may be picked up by the camera. Do not
install any optional parts that can interfere with the camera view, such as illuminating
parts or parts made of reflective material.
•It may be difficult to see the display under the following conditions, however, it does not
indicate a malfunction.
•In darkened areas.
•When the temperature around the lens is high/low.
•When the camera is wet such as on a rainy day or during periods of high humidity.
•When foreign material such as mud is stuck around the camera.
•When the camera lens reflects sunlight or headlight beams.
•Image display may be delayed if the temperature around the camera is low.
When Driving
Rear View Monitor
4-219
2017-6-7 7:51:19Form No. CX-5 8FY4-EE-17E+L_Edition2

•The vehicle is driven on bumps, inclines, gravel, or grass covered roads.
•Anything which generates ultrasound is near the vehicle, such as another vehicle's
horn, the engine sound of a motorcycle, the air brake sound of a large-sized vehicle, or
another vehicle's sensors.
•The vehicle is driven in heavy rain or in road conditions causing water-splash.
•A commercially-available wing pole or an aerial for a radio transmitter is installed to
the vehicle.
•The vehicle is moving towards a tall or square curbstone.
•An obstruction is too close to the sensor.
•Obstructions under the bumper may not be detected. Obstructions that are lower than the
bumper or thin which may have been initially detected but are no longer detected as the
vehicle approaches more closely.
•The following types of obstructions may not be detected:
•Thin objects such as wire or rope
•Things which absorb sonic waves easily such as cotton or snow
•Angular shaped objects
•Very tall objects, and those which are wide at the top
•Small, short objects
•Always have the system inspected at an expert repairer, we recommend an Authorised
Mazda Repairer if any shock is applied to the bumpers, even in a minor accident. If the
sensors are deviated, they cannot detect obstructions.
•The system may have a malfunction if the b eep does not operate or the indicator light
does not illuminate when the park assist sensors switch is turned on. Consult an expert
repairer, we recommend an Authorised Mazda Repairer.
•The system may have a malfunction if the beep sound which indicates a system
malfunction is heard and the indicator light flashes. Consult an expert repairer, we
recommend an Authorised Mazda Repairer.
•The beeper which indicates a system malfunction may not be heard if the ambient
temperature is extremely cold, or mud, ice, or snow adheres to the sensor area. Remove
any foreign material from the sensor area.
•When installing a trailer hitch, consult an expert repairer, we recommend an Authorised
Mazda Repairer.
When Driving
Parking Sensor System
4-230
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Sensor Detection Range
The sensors detect obstructions within the following range.

Front sensor detection range
Front corner sensor detection range Rear sensor detection range
Rear corner sensor detection range
B
A
D
C A: About 55 cm (About 21.7 in)
B: About 55 cm (About 21.7 in)
C: About 100 cm (About 39.3 in)
D: About 150 cm (About 59.1 in)
▼
Park Assist Sensor
System Operation
When the parking sensor switch is pressed with the ignition switched ON, the buzzer sounds
and the indicator light turns on.
When the ignition is switched ON with the parking sensor activa ted, the indicator light turns
on.
Press the switch again to stop the operation.
Indicator light
Operation conditions
The parking sensor system can be used when all of the following conditions are met:
•The ignition is switched ON.
•The parking sensor switch is turned on.
When Driving
Parking Sensor System
4-231
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

NOTE
If an obstruction is detected in a zone for 6 seconds or more, the beep sound is stopped
(except for the close-distance zone). If the same obstruction is detected in another zone, the
corresponding beep sound is heard.
▼ When Warning Indicator/Beep is Activated
The system notifies th
e driver of an abnormality by activating the beep sound and the
indicator light.
Indicator/Beep How to check
The beep sound is not heard. The system may have a malfuncti
on. Have the vehicle inspected at an expert
repairer, we recommend an Authoris ed Mazda Repairer as soon as possible.
The intermittent sound of the
buzzer is heard five times. Remove any foreign material from the sensor area. If the system does not re-
cover, have the vehicle inspected at an expert repairer, we rec
ommend an Au-
thorised Mazda Repairer.
A certain obstruc tion detection
indicator is con tinuously dis-
played. Refer to Obstruction Detection Indication on page 4-232.
When Driving
Parking Sensor System
4-235
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Audio Set [Type B
(touchscreen)]...................................5-71Basic Operation Method............. 5-71
Home screen............................... 5-75
Volume/Display/Sound
Controls...................................... 5-76
Operating the Radio. ...................5-78
Operating the Digital Audio
Broadcasting (DAB) Radio
*....... 5-81
Operating the Compact Disc (CD)
Player
*........................................ 5-83
Operating the Digi tal Versatile Disc
(DVD) Player
*............................ 5-86
How to use AUX mode.............. 5-89
How to use USB mode............... 5-90
Bluetooth
®.................................. 5-95
Bluetooth
® Preparation.............. 5-98
Available Language
*................ 5-100
Bluetooth
® Audio.....................5-101
How to Use Aha™................... 5-105
How to Use Stitcher ™ Radio... 5-108
Bluetooth
® Hands-Free............ 5-110
Voice Recognition.. ...................5-118
Settings..................................... 5-122
Applications..............................5-124
Troubleshooting. ....................... 5-125
Appendix........................................ 5-130
Things You Need to Know....... 5-130
Interior Equipment....................... 5-142 Sunvisors.................................. 5-142
Interior Lights...........................5-142
Accessory Sockets.................... 5-144
USB Power Outlet
*.................. 5-146
Cup Holder............................... 5-147
Bottle Holder............................ 5-148
Storage Compartmen ts............. 5-148
Removable Ashtray
*................ 5-152
5-2*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Operating Tips
•Operate the air-conditioning system
with the engine running.
•To prevent the battery from being
discharged, do not leave the fan control
dial/switch on for a long period of time
with the ignition switched ON when the
engine is not running.
•(With i-stop)
The airflow amount may decrease
slightly while the i-stop function is
operating.
•Clear all obstructions such as leaves,
snow and ice from the bonnet and the air
inlet in the cowl grille to improve the
system efficiency.
•Use the air-conditioning system to defog
the windows and dehumidify the air.
•The recirculate mode should be used
when driving through tunnels or while
in a traffic jam, or when you would like
to shut off outside air for quick cooling
of the interior.
•Use the outside air position for
ventilation or windscreen defrosting.
•If the vehicle has been parked in direct
sunlight during hot weather, open the
windows to let warm air escape, then
run the air-conditioning system.
•Run the air cond itioner about 10
minutes at least once a month to keep
internal parts lubricated.
•Have the air conditioner checked before
the weather gets hot . Lack of refrigerant
may make the air conditioner less
efficient.
The refrigerant specifications are
indicated on a label attached to the
inside of the engine compartment. If the
wrong type of refrigerant is used, it
could result in a ser ious malfunction of
the air conditioner. Consult a
professional, government certified
repairer for the inspection or repair
because a special device is required for
the air conditi oner maintenance.
For details, consult an expert repairer,
we recommend an Authorised Mazda
Repairer.
Label
Interior Features
Air-Conditioning System
5-4
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Manual Type
Temperature control dial Fan control dial
Mode selector dial
A/C switch Air intake selector switch Rear window defogger switch
▼Control Switches
Temperature control dial
This dial controls temperature. Turn it
clockwise for hot an
d anticlockwise for
cold.
Fan control dial
This dial allows va riable fan speeds.
The fan has seven speeds.
Mode selector dial
Turn the mode selector dial to select
airflow mode (page 5-6).
NOTE
•The mode selector dial can be set at the
intermediate positions (
) between each
mode. Set the dial to an intermediate
position if you want to split the airflow
between the two modes.
•For example, when the mode selector
dial is at the
position between the
and positions, airflow from the floor
vent is less than that of the
position.
A/C switch
Press the A/C swit ch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan control
dial is in any position except OFF.

Press the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function when
the outside temperature approaches 0 °C
(32 °F).
Air intake selector
This switch controls the source of air
entering the vehicle.

Outside or recirculated air positions can be
selected. Press the switch to select outside/
recirculated air positions.
Interior Features
Air-Conditioning System
5-7
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Recirculated air position (indicator light
illuminated)
Outside air is shut off. Use this position
when going through tunnels, driving in
congested traffic (high engine exhaust
areas) or when quick cooling is desired.
Outside air position (indicator light
turned off)
Outside air is allowed to enter the cabin.
Use this mode for ventilation or
windscreen defrosting.
WA R N I N G
Do not use the position in cold or rainy
weather:
Using the
position in cold or rainy
weather is dangerous as it will cause the
windows to fog up. Your vision will be
hampered, which could lead to a serious
accident.
Rear window defogger switch
Press the rear window defogger switch to
defrost the rear window.
Refer to Rear Windo w Defogger on page
4-76.
▼ Heating
1. Set the mode selector dial to the
position.
2. Set the air intake s elector to the outside
air position (indicator light turns off).
3. Set the temperature control dial to the
hot position.
4. Set the fan control dial to the desired speed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
•If the windscreen fogs up easily, set the
mode selector dial to the
position.
•If cooler air is desired at face level, set
the mode selector dial at the
position
and adjust the temperature control dial
to maintain maximum comfort.
•The air to the floor is warmer than air
to the face (except when the temperature
control dial is set at the extreme hot or
cold position).
▼ Cooling
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing the A/C switch.
5. After cooling begins, adjust the fan control dial and temperature control
dial as needed to maintain maximum
comfort.
CAUTION
If the air conditioner is used while driving
up long hills or in heavy traffic, monitor the
high engine coolant temperature warning
indication/warning li ght to see if it is
illuminated or flashing (page 4-42).
The air conditioner may cause engine
overheating. If the warning light is
illuminated or flashing, turn the air
conditioner off (page 7-37).
Interior Features
Air-Conditioning System
5-8
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2