2017 MAZDA MODEL CX-5 turn signal

SignalIndicator Page
(Green)
*Brake Pedal Operation demand Indicator Light 4-81
AUTOHOLD Active Indicator Light*14-86
*Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) indicator Light 4-159
TCS/DSC Indicator Light*1
Traction Control
System (TCS) 4-91
Dynamic Stabil- ity Control(DSC)4-93
Turns on 7-46
TCS OFF Indicator Light*14-92
*Select Mode Indication 4-101
(Green)
*High Beam Control System (HBC) Indicator Light 4-110
*Adaptive LED Headlights (ALH) Indicator Light4-114
*Blind Spot Monitoring (BSM) OFF Indicator Light*1
Except malfunc-
tion
4-119
Malfunction 7-46
(White)
*Mazda Radar Cruise Contr ol (MRCC) Main Indication 4-140
*Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) Main Indication 4-153
(Green)
*Mazda Radar Cruise Control (MRCC) Set Indication
4-140
*Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) Set Indication 4-153
(White/Green)
*Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) Indication 4-166
*Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) OFF Indicator Light*14-171
When Driving
Instrument Cluster and Display
*Some models.4-47
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalIndicator Page
*Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Ind ica-
tor Light*1
Advanced Smart City Brake Sup- port (Advanced
SCBS)4-184
Smart City
Brake Support [Forward](SCBS F) 4-188
Smart City
Brake Support [Reverse]
(SCBS R) 4-192
Smart Brake
Support (SBS) System
4-195
(White)
*Adjustable Speed Limiter (ASL) Main Indication 4-177
(Green)
*Adjustable Speed Limiter
(ASL) Set Indication 4-177
(White)
*Cruise Main Indication 4-208
(Green)
*Cruise Set Indication4-208
*1 The light turns on when the ignition is switched on for an ope
ration check, and turns off
a few seconds later or when the engine is started. If the light does not turn on or remains
turned on, have the vehicle inspected at an expert repairer, we recommend an
Authorised Mazda Repairer.
*2 The light turns on continuously when the electric parking brak e (EPB) is applied.
When Driving
Instrument Cluster and Display
*Some models.4-49
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Manual Shift Mode
The manual shift mode gives you the feel
of driving a manual transaxle vehicle by
allowing you to operate the selector lever
manually. This allows you to control
engine rpm and torque to the drive wheels
much like a manual transaxle when more
control is desired.
To change to manual shift mode, shift the
lever from D to M.

NOTE
Changing to manual shift mode while
driving will not damage the transaxle.
To return to automatic shift mode, shift the
lever from M to D.
NOTE
•If you change to manual shift mode
when the vehicle is stopped, the gear
will shift to M1.
•If you change to manual shift mode
without depressing the accelerator pedal
when driving in D range, 5th gear/6th
gear, the gear will shift to M4/M5.
▼ Indications
Manual shift mode indication
In manual shift mode, the “M” of the shift
position indication in
the instrument panel
illuminates.
Gear position indication
The numeral for th e selected gear
illuminates.

Manual shift mode
indicationGear position indication
NOTE
•If the gears cannot be shifted down
when driving at higher speeds, the gear
position indication will flash twice to
signal that the gears cannot be shifted
down (to protect the transaxle).
•If the automatic tr ansaxle fluid (ATF)
temperature becomes too high, there is
the possibility that the transaxle will
switch to automatic shift mode,
cancelling manual shift mode and
turning off the gear position indication
illumination. This is a normal function
to protect the AT. After the ATF
temperature has decreased, the gear
position indication illumination turns
back on and driving in manual shift
mode is restored.
When Driving
Automatic Transaxle
4-58
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Leaving Home Light
The leaving home light turns on the lights
when the transmitter unlock button is
pressed while away from the vehicle.
The following lights turn on when the
leaving home light is operated.
Low beams, Position l
ights, Tail lights,
Number plate lights.
To turn on the lights
When the ignition swi tch and the headlight
switch are in the following conditions, the
headlights will illuminate when the
transmitter unlock button is pressed and
the vehicle receives the transmitter signal.
The headlights turn off after a certain
period of time has elapsed (30 seconds).
•Ignition switch: off
•Headlight switch: , , or
Unlock button
Lock button
NOTE
•Operation of the leaving home light can
be turned on or off.
Refer to Personalisation Features on
page 9-12.
•When the transmitter lock button is
pressed and the vehicle receives the
transmitter signal, the headlights turn
off.
•When the headlight switch is turned to
the
position, the headlights turn off.
▼ Headlight Levelling*
The number of passengers and weight of
cargo in the luggage compartment change
the angle of the headlights.

The angle of the headlights will be
automatically adjusted when turning on
the headlights.

The warning/indicato
r light turns on when
the system has a malfunction.
Refer to Warning/Indicator Lights on page
4-42.
▼ Running Lights*
Some countries require moving vehicles to
have their lights on (running lights) during
the daytime.

The running lights turn on automatically
when the vehicle starts moving.

They turn off when the parking brake is
operated or the selector lever is shifted to
the P position (automatic transaxle
vehicle).
NOTE
The running lights can be deactivated.
Refer to Personalisation Features on page
9-12.
When Driving
Switches and Controls
*Some models.4-67
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

The rear fog light indicator light in the
instrument cluster illuminates while the
rear fog light is on.

Fog light switch
To turn the rear fog light off, do any of the
following:
•Rotate the fog light switch to the
position again (the fog light switch
returns to its original position
automatically).
•Turn the headlight switch to the
position.
The rear fog light indicator light in the
instrument cluster goes off when the rear
fog light is turned off.
NOTE
(With auto-light control)
When the headlight switch is in the
position and the headlights, exterior lights
and instrument panel illuminated, the rear
fog light turns on when the rear fog light
switch is turned on.
Turn and Lane-Change Signals
The ignition must be switched ON to use
the turn and lane-change signals.
▼Direction Indicators
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.

If the indicator light continues to flash
after a turn, ma
nually return th e lever to its
original position.
Right turn
Left turn
Right lane change
Left lane change OFF
The direction indicato
rs in the instrument
cluster flash according to the operation of
the direction indicator lever to show which
signal is working.

NOTE
•If an indicator light stays on without
flashing or if it flashes abnormally, one
of the direction indicator bulbs may be
burned out.
•A personalised function is available to
change the turn indicator sound volume.
(page 9-12)
When Driving
Switches and Controls
4-70
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Lane-Change Signals
Move the lever halfway toward the
direction of the lane change―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
▼Three-Flash Turn Signal
After releasing the direction indicator
lever, the direction indicator flashes three
times. The operation can be cancelled by
moving the lever in the direction opposite
to which it was operated.
NOTE
The three-flash turn signal function can be
switched to operable/inoperable using the
personalisation function.
Refer to Personalisation Features on page
9-12.
Windscreen Wipers and
Wa s h e r
The ignition must be switched ON to use
the wipers.
WA R N I N G
Use only windscreen washer fluid or plain
water in the reservoir:
Using radiator antifreeze as washer fluid is
dangerous. If sprayed on the windscreen, it
will dirty the windscreen, affect your
visibility, and could result in an accident.
Only use windscreen washer fluid mixed
with anti-freeze protection in freezing
weather conditions:
Using windscreen washer fluid without
anti-freeze protection in freezing weather
conditions is dangerous as it could freeze
on the windscreen and block your vision
which could cause an accident. In addition,
make sure the windscreen is sufficiently
warmed using the defroster before
spraying the washer fluid.
When Driving
Switches and Controls
4-71
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•If the brake pedal is depressed while
driving on slippery roads, the
emergency stop signal system could
operate causing all the turn and lane
change signals to flash. Refer to
Emergency Stop Signal System on page
4-88.
•While the emergency stop signal system
is operating, all the direction indicators
automatically flash rapidly to caution
the driver of a vehicle following behind
your vehicle of a sudden braking
situation. Refer to Emergency Stop
Signal System on page 4-88.
When Driving
Switches and Controls
4-79
2017-6-7 7:51:19Form No. CX-5 8FY4-EE-17E+L_Edition2

NOTE
•(Without multi-information display)
If the AUTOHOLD switch is pressed
without depressing the brake pedal
while the AUTOHOLD is operating
(AUTOHOLD active indicator light is
turned on), the brake pedal operation
demand indicator li ght (green) in the
instrument cluster turns on to notify the
driver that it is necessary to depress the
brake pedal.
(Green)
(With multi-information display)
If the AUTOHOLD switch is pressed
without depressing the brake pedal
while AUTOHOLD is operating
(AUTOHOLD active indicator light in
instrument cluster is turned on), the
message Depress Brake Pedal to
Release Parking Brake is indicated on
the multi-information display to notify
the driver to depress the brake pedal.
•If any of the following conditions occurs
while the AUTOHOLD function is
operating (AUTOHOLD active indicator
light is turned on), the electric parking
brake (EPB) is applied automatically
and the AUTOHOLD function turns off.
For the electric parking brake (EPB)
operation, refer to the electric parking
brake (EPB) on page 4-81.
•The ignition is switched OFF.
•There is a problem with the
AUTOHOLD function.
Emergency Stop Signal System
Your Mazda is equipped with an
emergency stop signal system that is
designed to determine whether you are
depressing the brake pedal with greater
force than during normal braking such as
in a situation requiring emergency
braking. If the system determines that such
a situation is occurring, it flashes all the
direction indicators rapidly to caution the
driver of the vehicle following behind
your vehicle of the sudden braking
situation.
The system is cancelled when the brake
pedal is released or the system determines
that the brake pedal is no longer heavily
depressed based on t he rate at which the
vehicle speed decreases.
NOTE
•If you bring your vehicle to a complete
stop while all the direction indicators
are flashing rapidly, the rapid flashing
of all the directio n indicators changes
back to the normal flashing pattern.
•The emergency stop signal system does
not operate at vehicle speeds under
about 60 km/h (37 mph).
•If the brake pedal is depressed while
driving on slippery roads, the
emergency stop signal system could
operate causing all the turn and lane
change signals to flash.
When Driving
Brake
4-88
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2