2017 Lexus GS F Quick Guide

8
GS F_QG_OM30G10U_(U)
: If equipped
*: Refer to “OWNER’S MANUAL”.
Horn*
Talk switch P.57
Telephone switches P.57
LDA (Lane Departure Alert
with steering control) switch
 P.32
Cruise control switch
P.33, 37
Vehicle-to-vehicle distance button P.35
Meter control switches P.22
Paddle shift switches*
Audio remote control switches P.58

9
GS F_QG_OM30G10U_(U)
OverviewInstrument Panel
Remote Touch P.46
Shift lever*
Driving mode select switch P.40
Snow mode switch*
Seat heater switch P.68
Seat ventilator switches P.68
Seat heater switch P.68
TVD switch P.45Rear sunshade switch*
Intuitive parking assist
switch
 P.39

10
GS F_QG_OM30G10U_(U)
OverviewRoof
: If equipped
*: Refer to “OWNER’S MANUAL”.
Moon roof switches*
Personal lights*
“SOS” button P.79
Garage door opener switches P.75
Interior light*Vanity lights*
Personal lights*
Inside rear view mirror*

11
GS F_QG_OM30G10U_(U)
Floor mat installation
Insert the retaining hooks (clips) into
the floor mat eyelets.
Turn the upper knob of each retaining
hook (clip) to secure the floor mats in
place.
*: Always align the marks.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
Use only floor mats designed specifically for vehicles of the same model and model year
as your vehicle. Fix them securely in place onto the carpet.
1
*
2

12
GS F_QG_OM30G10U_(U)
Smart Access System with Push-button Start
■Entering and exiting the vehicle
Grip the driver’s door handle to unlock
the door. Grip the passenger’s door
handle to unlock all the doors.
*
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for
3 seconds after the doors are locked.
*: The door unlock settings can be
changed.
Touch the lock sensor (the indentation
on the upper part of the door handle)
to lock all the doors.Check that the door is securely
locked.
■ Opening the trunk
While carrying the electronic key, press the
button.
When all the doors are unlocked with
the power door lock system, the trunk
can be opened without carrying the
electronic key.
If the vehicle is equipped with a power
trunk opener and closer, the trunk lid
automatically opens fully.
The following operations can be performed simply by carrying the electronic key (includ-
ing the card key) on your person, for exampl e in your pocket. The driver should always
carry the electronic key.
For details on starting the engine, see page 16.
1
2
For details on what to do when the electronic key does not operate properly, see page 88.

13
GS F_QG_OM30G10U_(U)
Front Seats
■Adjustment procedure
Seat position adjustment switch
Seatback angle adjustment switch
Seat cushion (front) angle adjustment
switch Vertical height adjustment switch
Lumbar support adjustment switch (if
equipped)1
2
3
4
5

14
GS F_QG_OM30G10U_(U)
Driving Position Memory
■Driving position memory
■
Recording procedure
Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, outside rear view mirrors and HUD (head-up
display) (if equipped) to the desired positions. While pressing the “SET” button, or within
3 seconds after the “SET” button is pressed,
press button “1”, “2” or “3” until the buzzer
sounds.If the selected button has already been
preset, the previously recorded position
will be overwritten.
■Recall procedure
Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Press one of the buttons for the driving
position you want to recall until the buzzer
sounds.
This feature automatically adjusts the front seats, steering wheel and outside rear view
mirrors to make entering and exiting the vehicle easier or to suit your preferences.
1
2
3
4
1
2
3

15
GS F_QG_OM30G10U_(U)
■Memory recall function (driver’s side only)
Each electronic key (including a card key) can be registered to recall your preferred driving
position.
■Registering procedure
Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Recall the driving position that you want to record.
While pressing the recalled button, press
and hold the door lock switch (either lock
or unlock) until the buzzer sounds. If the button could not be registered, the
buzzer sounds continuously for approxi-
mately 3 seconds.1
2
3
4