Turn signals and lane change
signals
The ignition switch must be on for the
turn signals to function. To turn on the turn signals, move the lever up or down
(A). The green arrow indicators on the
instrument panel indicate which turn signal is operating. They will self-cancel
after a turn is completed. If the indica‐
tor continues to flash after a turn, manually return the lever to the OFF
position.
To signal a lane change, move the turn
signal lever slightly and hold it in posi‐ tion (B). The lever will return to the OFF
position when released. If an indicator stays on and does not
flash or if it flashes abnormally, one of the turn signal bulbs may be burned
out and will require replacement.
One-touch lane change function (if
equipped)
To activate an one-touch lane change
function, move the turn signal lever slightly for less than 0.7 second and
then release it. The lane change signals
will blink 3 times.
NOTICE
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec‐
tion in the circuit.
Rear fog light (if equipped)
To turn the rear fog lights on, turn the
headlight switch to the headlight on position and turn the rear fog light
switch (1) to the ON position.
The rear fog lights turn on when the
rear fog light switch is turned on after the headlight switch is in the parklight
position.
To turn the rear fog lights off, turn the
rear fog light switch to the on position again or turn the headlight switch off.
5-119
5
Features of your vehicle
Light bulb position (rear) 3 F B S D P N C J O B U J P O M B N Q 5 Z Q F "
0 + ' ) -
3 F B S D P N C J O B U J P O M B N Q 5 Z Q F #
0 + ' ) -
- J D F O T F Q M B U F M B N Q
) J H I N P V O U F E T U P Q M B N Q
0 + ' ) -
0 + ' ) -
1. Rear turn signal lamp
2. Stop lamp (LED type)
3. Tail lamp (LED type)
4. Back-up lamp
5. Rear fog lamp (LED type)
6. License plate lamp
7. High mounted stop lamp
Light bulb position (side)
0 + ' - #
1. Side repeater lamp (LED type)
9-73
9
Maintenance
