2017 KIA OPTIMA PLUG-IN HYBRID tow

Aux, USB port
0+'
You can use an aux port to connect au‐
dio devices and an UêB port to plug in
an UêB or içod ®
.
NOTICE
When using a portable audio device
connected to the power outlet, noise
may occur during playback. If this
happens, use the power source of
the portable audio device.
❈ içod ®
is a trademark of Apple Inc.
How vehicle radio works
FM reception
0+'-
AM and FM radio signals are broadcast
from transmitter towers located around your city. They are intercepted
by the radio antenna on your vehicle.
This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached
your vehicle, the precise engineering of
your audio system ensures the best possible quality reproduction. However,
in some cases the signal coming to your
vehicle may not be strong and clear.
This can be due to factors such as the distance from the radio station, close‐
ness of other strong radio stations or
the presence of buildings, bridges or other large obstructions in the area.
Audio system
6-04

NOTICE
•Do not wait for the engine to
warm up while the vehicle remains
stationary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
•Always start the vehicle with your
foot on the brake pedal. Do not
depress the accelerator while
starting the vehicle. Do not race
the engine while warming it up.
•If ambient temperature is low, the
"" indicator may remain illumi‐
nated longer than the normal
amount of time.
NOTICE
To prevent damage to the vehicle:
(Continued)
(Continued)
•If the "" indicator turns off
while you are in motion, do not at‐
tempt to move the shift lever to
the P (Park) position.
If traffic and road conditions per‐
mit, you may put the shift lever in
the N (Neutral) position while the
vehicle is still moving and press
the Engine Start/Stop button in an
attempt to restart the hybrid sys‐
tem.
•Do not push or tow your vehicle to
start the hybrid system.
NOTICE
•If the battery is weak or the smart
key does not work correctly, you
can start the hybrid system by
pressing the engine start/stop
button with the smart key.
The side with the lock button
should be contacted directly.
When you press the engine start/
stop button directly with the
smart key, the smart key should
contact the button at a right an‐
gle.
•When the stop lamp fuse is blown,
you cannot start the hybrid sys‐
tem normally.
Replace the fuse with a new one.
If it is not possible, you can start
the hybrid system by pressing the
engine start/stop button for 10
seconds while it is in the ACC posi‐
tion. The engine can start without
depressing the brake pedal. But
for your safety always depress
the brake pedal before starting
the engine.

7-09
7
Driving your vehicle

(Continued)
•If the parking brake warning lightdoes not illuminate or blinks eventhough the EPB switch was pulledup, the EPB is not applied.
•If the parking brake warning lightblinks when the EPB warning lightis on, press the switch, then pull itup. Once more press it back to itsoriginal position and pull it back up.If the EPB warning does not gooff, we recommend that the sys‐tem be checked by an authorizedKia dealer.
Emergency braking
If there is a problem with the brake
pedal while driving, emergency braking is possible by pulling up and holding the
EPB switch. Braking is possible only
while you are holding the EPB switch.
WARNING
Do not operate the parking brakewhile the vehicle is moving except inan emergency situation.
NOTICE
During emergency braking by the
EPB, the parking brake warning light
will illuminate to indicate that the
system is operating.
CAUTION
If you continuously notice a noise orburning smell when the EPB is usedfor emergency braking, we recom‐mend that the system be checkedby an authorized Kia dealer.
When the EPB (Electronic ParkingBrake) does not release
If the EPB does not release normally, we recommend that you contact an au‐
thorized Kia dealer by loading the vehi‐
cle on a flatbed tow truck and have the system checked.
AUTO HOLD (if equipped)
The Auto Hold maintains the vehicle in
a standstill even though the brake ped‐ al is not depressed after the driver
brings the vehicle to a complete stop by
depressing the brake pedal.
Set up
0+'-
1. With the driver's door, engine hood closed, fasten the driver's seat belt
or depress the brake pedal and
then press the Auto Hold button.
The white AUTO HOLD indicator will
come on and the system will be in
the standby position.
Driving your vehicle
7-24

-There is a group of pedestrians.
WARNING
•Cancel the AEB in the User Set‐tings on the LCD display, beforetowing another vehicle. While tow‐ing, the brake application may ad‐versely affect your vehicle safety.
•Pay great caution to the vehicle infront, when it has heavy loadingextended rearward, or when it hashigher ground clearance.
•The sensor only detects pedes‐trians, not carts, bicycles, motor‐cycles, luggage bags, or strollers.
•The AEB does not operate in a cer‐tain situation. Thus, never test-operate the AEB against a personor an object. It may cause a severeinjury or even death.
NOTICE
The system may temporarily cancel
due to the strong electric waves.
Driving your vehicle

7-46

Operation
0+'-
• If a traffic sign that is relevant toyour vehicle is passed, the system
displays the information of the speed limits and no passing restrictions to
the driver.
• When the driver turns on the ignition, the system displays stored informa‐
tion of the speed limit before turning
off the ignition. • Sometimes different speed limits are
displayed for the same road. The in‐
formation displayed is depending on
the situation. Because, traffic signs
with additional sign (e.g rainy, ar‐
row...) are also detected and com‐ pared with vehicle interior data (e.g
wiper operation, turn signal...).
• The system can update the speed limit information without visible
speed limit signs in the following sit‐ uations. - When you change your driving di‐ rection with right or left or U turn‐ ing.
- When vehicle changes roads. (e.g. from highway to country road…)
- When you enter or exit into town or village.
NOTICE
If speed limit value has the differ‐
ence between cluster and naviga‐
tion, check the speed unit setting in
navigation.
Display
/P
SFMJBCMF
TQFFE
MJNJU
JOGPSNBUJPO
86.
• If the system doesn’t have a reliablespeed limit information, the following
symbol is displayed in both the in‐ strument cluster and navigation
screen.
/P
QBTTJOH
JOGPSNBUJPO
86.86.
• If the system detects no passing sign,no passing is displayed in both the in‐
strument cluster and navigation
screen.
Driving your vehicle
7-56

0+'
• Always be cautious for vehicles withhigher height or vehicles carrying
loads that stick out to the back of the vehicle.
WARNING
•The advanced smart cruise controlsystem cannot guarantee the stopfor every emergency situation.If an emergency stop is necessary,you must apply the brakes.
(Continued)
(Continued)
•Keep a safe distance according toroad conditions and vehicle speed.If the vehicle to vehicle distance istoo close during a high-speed driv‐ing, a serious collision may result.
•The advanced smart cruise controlsystem cannot recognize a stop‐ped vehicle, pedestrians or an on‐coming vehicle. Always look aheadcautiously to prevent unexpectedand sudden situations from occur‐ring.
•SCC system may have difficulty inmaintaining the correct distance orspeed, if the vehicle is driving on asteep incline or towing a trailer.
•When other vehicles are changinglanes in front of you frequently,the advanced smart cruise controlsystem may not operate appropri‐ately. Always look ahead cautious‐ly to prevent unexpected and sud‐den situations from occurring.
(Continued)
(Continued)
•The advanced smart cruise controlsystem is not a substitute for safedriving practices but a conveniencefunction only. It is the responsibili‐ty of the driver to always checkthe speed and the distance to thevehicle ahead.
•Always be aware of the selectedspeed and vehicle to vehicle dis‐tance.
•Always maintain sufficient brakingdistance and decelerate your vehi‐cle by applying the brakes if nec‐essary.
•As the advanced smart cruise con‐trol system may not recognizecomplex driving situations, alwayspay attention to driving conditionsand control your vehicle speed.
•For safe operation, carefully readand follow the instructions in thismanual before use.
•After an engine start, please stopfor several seconds. If system ini‐tialization is not completed, theSCC does not normally operate.
(Continued)

7-73
7
Driving your vehicle

(Continued)
•Do not place objects on the dash‐board that reflects light such asmirrors, white paper, etc. The sys‐tem may malfunction if the sun‐light is reflected.
•Loud audio sounds may interferewith the passenger from hearingwarning chimes.
•Always have your hands on thesteering wheel while the LKASsystem is activated. If you contin‐ue to drive with your hands off thesteering wheel after the "Hand on"warning, the system will turn offautomatically.
•If you drive very fast, the vehiclemay stray out of the lane. Alwaysbe cautious when using the sys‐tem.
•When you tow the trailer, makesure that you turn off LKAS func‐tion.
LKAS operation
0+'
To turn ON the LKAS, press the switch,
after turning ON the ignition switch. The indicator illuminates on the instru‐
ment cluster. To turn OFF the LKAS,
press the switch again.
The LKAS indicator illuminates in 3colors as follows:
• [Green] - When the system operating condi‐tions are satisfied.
• [White] - The system operation conditionsare not satisfied. - The sensor does not detect lane
lines.
• [Yellow] - There is a malfunction with theLKAS. In this case, we recommend
you to have your vehicle inspectedby an authorized Kia dealer.
LKAS activation
0+'-
• The LKAS screen will appear on the LCD display if the system is activa‐
ted.
• When both lanes are detected and all the conditions to activate the LKAS
are satisfied, the steering wheel will
Driving your vehicle
7-84

SPECIAL DRIVING CONDITIONS
Hazardous driving conditions
When hazardous driving conditions are
encountered such as water, snow, ice, mud, sand, or similar hazards, follow
these suggestions: • Drive cautiously and allow extra dis‐ tance for braking.
• Avoid sudden braking or steering.
• When braking with non-ABS brakes pump the brake pedal with a light up-
and-down motion until the vehicle is stopped.
WARNING
nABS
Do not pump the brake pedal on avehicle equipped with ABS.
• If stalled in snow, mud, or sand, use second gear. Accelerate slowly to
avoid spinning the drive wheels.
• Use sand, rock salt, tire chains, or other non-slip material under the
drive wheels to provide traction when
stalled in ice, snow, or mud.
WARNING
nDownshifting
Downshifting with an automatictransaxle, while driving on slipperysurfaces can cause an accident. Thesudden change in tire speed couldcause the tires to skid. Be carefulwhen downshifting on slippery sur‐faces.
Rocking the vehicle
If it is necessary to rock the vehicle to
free it from snow, sand, or mud, first turn the steering wheel right and left
to clear the area around your front
wheels. Then, shift back and forth be‐ tween 1 (First) and R (Reverse) in vehi‐
cles equipped with a manual transaxle
or R (Reverse) and any forward gear in vehicles equipped with an Automatic
Transaxle / Dual clutch transmission. Do
not race the engine, and spin the wheels as little as possible. If you are
still stuck after a few tries, have the
vehicle pulled out by a tow vehicle to
avoid engine overheating and possible
damage to the transaxle.
CAUTION
Prolonged rocking may cause engineover-heating, transaxle damage orfailure, and tire damage.
WARNING
nSpinning tires
Do not spin the wheels, especially atspeeds more than 56 km/h(35 mph). Spinning the wheels athigh speeds when the vehicle is sta‐tionary could cause a tire to over‐heat which could result in tire dam‐age that may injure bystanders.
NOTICE
The ESC system should be turned
OFF prior to rocking the vehicle.

7-99
7
Driving your vehicle