2017 KIA OPTIMA PLUG-IN HYBRID climate control

Automatic climate control system (if equipped)
5ZQF
"
5ZQF
#
System overview
1. Driver's temperature control knob
2. AUTO (automatic control) button
3. Front windshield defroster button
4. Rear window defroster button
5. Air conditioning button
6. Air intake control button
7. OFF button
8. Fan speed control button
9. Mode selection button
10. Passenger's temperature control knob
11. Dual temperature control selection button
12. Climate information screen selec‐ tion button
13. DRIVER ONLY button
14. ECON (Economy air conditioning) button

5-137
5
Features of your vehicle

Automatic heating and air
conditioning
0+'
1. Press the AUTO button. The modes,fan speeds, air intake and air-con‐
ditioning will be controlled auto‐
matically according to the temper‐
ature setting.
%SJWFSLÓT
TJEF1BTTFOHFSLÓT
TJEF
0+'
2. Turn the temperature control knob to the desired temperature.
NOTICE
•To turn the automatic operation
off, select any button or switch
of the following:
-Mode selection button
-Air conditioning button
(Continued)
(Continued)
-Front windshield defroster
button (Press the button one
more time to deselect the
front windshield defroster
function. The 'AUTO' sign will
illuminate on the information
display once again.)
-Air intake control button
-Fan speed control button
The selected function will be
controlled manually while the
other functions operate auto‐
matically.
•For your convenience and to im‐
prove the effectiveness of the
climate control, use the AUTO
button and set the temperature
to 22°C/71°F (for Europe) or
23°C/73°F (for Except Europe).
Features of your vehicle
5-138

Air intake control
This is used to select the outside
(fresh) air position or recirculated air position.
To change the air intake control posi‐
tion, push the control button.
Recirculated air position
With the recirculated air position selected, air from
the passenger compart‐ment will be drawnthrough the heating sys‐
tem and heated or cooled
according to the functionselected.
Outside (fresh) air position
With the outside (fresh) air position selected, air
enters the vehicle fromoutside and is heated or
cooled according to thefunction selected.
NOTICE
Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and the air within the pas‐
senger compartment may become
stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in exces‐
sively dry air in the passenger com‐
partment.
WARNING
•Continue using the climate controlsystem in the recirculated air posi‐tion may allow humidity to in‐crease inside the vehicle whichmay fog the glass and obscure vis‐ibility.
•Do not sleep in a vehicle with theair conditioning or heating systemon. It may cause serious harm ordeath due to a drop in the oxygenlevel and/or body temperature.
•Continue using the climate controlsystem in the recirculated air posi‐tion can cause drowsiness orsleepiness, and loss of vehicle con‐trol. Set the air intake control tothe outside (fresh) air position asmuch as possible while driving.

5-143
5
Features of your vehicle

Fan speed control
The fan speed can be set to the desired
speed by pushing the fan speed control button.
The higher the fan speed is, the more
air is delivered.
Pressing the OFF button turns off the
fan.
Air conditioning
Press the A/C button to turn the air
conditioning system on (indicator light will illuminate). Press the button again
to turn the air conditioning system off.
OFF mode
Press the front blower OFF button to
turn off the front air climate control system. However, you can still operate
the mode and air intake buttons as long
as the ignition switch is in the ON posi‐
tion.
Features of your vehicle
5-144

WINDSHIELD DEFROSTING AND DEFOGGING
Automatic climate control
system
To defog inside windshield
0+'
1. Set the fan speed to the desiredposition.
2. Select the desired temperature.
3. Press the defroster button (
).
4. The air conditioning will turn on ac‐ cording to the detected ambient
temperature and outside (fresh) air
position will be selected automati‐
cally. If the air conditioning and outside
(fresh) air position are not selected au‐
tomatically, adjust the corresponding
button manually. If the
position is
selected, lower fan speed is adjusted to a higher fan speed.
To defrost outside windshield
0+'
1. Set the fan speed to the highest position.
2. Set the temperature to the ex‐ treme hot (HI) position.
3. Press the defroster button
. 4. The air conditioning will turn on ac‐
cording to the detected ambient
temperature and outside (fresh) air
position will be selected automati‐
cally.
Operation tips
• For maximum defrosting, set the temperature control to the extreme
right/hot position and the fan speed control to the highest speed.
• If warm air to the floor is desired while defrosting or defogging, set the
mode to the floor-defrost position.
• Before driving, clear all snow and ice from the windshield, rear window,
outside rear view mirrors, and all side windows.
• Clear all snow and ice from the hood and air inlet in the cowl grill to im‐
prove heater and defroster efficiency
and to reduce the probability of fog‐
ging up the inside of the windshield.
WARNING
nWindshield heating
(Continued)
Features of your vehicle
5-146

(Continued)
Do not use the or positionduring cooling operation in extreme‐ly humid weather. The difference be‐tween the temperature of the out‐side air and the windshield couldcause the outer surface of the wind‐shield to fog up, causing loss of visi‐bility. In this case, set the mode se‐lection to the position and fanspeed control to the lower speed.
Defogging logic (if equipped)
To reduce the possibility of fogging up
the inside of the windshield, the air in‐ take or air conditioning are controlled
automatically according to certain con‐
ditions such as the
or position.
To cancel or return to the defogging
logic, do the following.
Automatic climate control system
1. Turn the ignition switch to the ON position.
2. Press the defrost button (
).
3. While pressing the air conditioning button (A/C), press the air intake
control button at least 5 times
within 3 seconds.
The indicator on the air intake button will blink 3 times. It indicates that the
defogging logic is canceled or returned
to the programmed status.
If the battery has been discharged or disconnected, it resets to the defog
logic status.
Auto defogging system (Only
for automatic climate control
system, if equipped)
0+'-
Auto defogging reduces the possibility
of fogging up the inside of the wind‐ shield by automatically sensing the
moisture of inside the windshield.
This indicator illuminates when the auto defogging
system senses the moistureof inside the windshield andoperates.
If more moisture is in the vehicle, high‐
er steps operate as follow.

5-147
5
Features of your vehicle

(For European region)
Step 1: Blowing air flow toward thewindshield
Step 2: Increasing air flow toward the windshield
Step 3: Operating the air condition‐ ing.
Step 4: Outside air position
(For except European region)
Step 1: Outside air position
Step 2: Operating the air condition‐ ing.
Step 3: Blowing air flow toward the windshield
Step 4: Increasing air flow toward the windshield
To cancel or reset the AutoDefogging System
Press the front windshield defroster
button for 3 seconds when the ignition
switch is in the ON position.
When the Auto Defogging System is canceled, ADS OFF symbol will blink 3
times and the ADS OFF will be displayed
on the climate control information screen.
When the Auto Defogging System is re‐
set, ADS OFF symbol will blink 6 times
without a signal.
Features of your vehicle
5-148

Engine compartment................................................................ 9-03
Maintenance services............................................................... 9-04Owner’s responsibility.......................................................... 9-04
Owner maintenance precautions....................................... 9-04
Owner maintenance................................................................. 9-06 Owner maintenance schedule.............................................9-06
Scheduled maintenance service............................................. 9-08 Scheduled maintenance service precaution..................... 9-08
Normal maintenance schedule - for gasoline en‐ gine [for Europe (except Russia)].......................................9-09
Normal maintenance schedule - for gasoline en‐ gine [for Europe (except Russia)] (Continued)................. 9-10
Maintenance under severe usage conditions - for gasoline engine [for Europe (except Russia)]...................9-12
Normal maintenance schedule - for gasoline en‐ gine [except Europe (including Russia)]............................ 9-14
Normal maintenance schedule - for gasoline en‐ gine [except Europe (including Russia)] (Continued).......9-15
Maintenance under severe usage conditions - for gasoline engine [except Europe (including Russia)]........ 9-18
Explanation of scheduled maintenance items..................... 9-21 Engine oil and filter............................................................... 9-21
HSG (hybrid starter & generator) belt.............................. 9-21
Fuel filter (for gasoline)....................................................... 9-21
Fuel lines, fuel hoses and connections.............................. 9-21
Vapor hose (for gasoline engine) and fuel filler cap........9-21
Vacuum crankcase ventilation hoses ................................9-21
Air cleaner filter.....................................................................9-21
Spark plugs (for gasoline engine)....................................... 9-21
Cooling system...................................................................... 9-22 Coolant (Engine/Inverter).................................................... 9-22
Automatic transaxle fluid.................................................... 9-22
Brake hoses and lines........................................................... 9-22
Brake fluid ............................................................................. 9-22
Parking brake ........................................................................ 9-22
Brake discs, pads, calipers and rotors............................... 9-22
Suspension mounting bolts................................................. 9-22Steering gear box, linkage & boots/lower arm
ball joint.................................................................................. 9-22
Drive shafts and boots......................................................... 9-22
Air conditioning refrigerant................................................. 9-23
Engine oil.....................................................................................9-24 Checking the engine oil level................................................9-24
Changing the engine oil and filter...................................... 9-24
Coolant........................................................................................ 9-26 Checking the coolant level................................................... 9-26
Engine coolant....................................................................... 9-27
Inverter coolant..................................................................... 9-27
Recommended coolant.........................................................9-28
Changing the coolant............................................................ 9-29
Brake fluid ................................................................................. 9-30 Checking the brake fluid level............................................. 9-30
Washer fluid............................................................................... 9-31 Checking the washer fluid level.......................................... 9-31
Parking brake ............................................................................ 9-32 Checking the parking brake................................................. 9-32
Air cleaner.................................................................................. 9-33 Filter replacement.................................................................9-33
Climate control air filter........................................................... 9-35 Filter inspection..................................................................... 9-35
Maintenance

9