2017 JEEP GRAND CHEROKEE instrument panel

TABLE OF CONTENTSSECTIONPAGE
1
UNDERSTANDING YOUR INSTRUMENT PANEL .....................................................5
2
STARTING AND OPERATING ................................................................33
3

UNDERSTANDING YOUR INSTRUMENT PANEL
CONTENTS
UCONNECT SETTINGS ............................6
SRT Performance Pages ......................6
SRT Drive Modes ...........................14
Race Options .............................26
Valet Mode ...............................29
ECO Mode ...............................31
5

UCONNECT SETTINGS
SRT Performance Pages
Performance Pages is an application that provides a display for perfor-
mance indicators, as received from the instrument cluster, that will
help you gain familiarity with the capabilities of your SRT vehicle in
real-time.
To access the SRT Performance Pages, press the “Apps” button on the
touchscreen, then press the “Performance Pages” button on the
touchscreen, or press “SRT Performance Pages” in the top left of the
touchscreen while in Drive Modes. Press the desired button on the
touchscreen to access that specific Performance Page.
WARNING!
Measurement of vehicle statistics with the SRT Performance Pages
is intended for off-highway or off-road use only and should not be
done on any public roadways. It is recommended that these features
be used in a controlled environment and within the limits of the law.
The capabilities of the vehicle as measured by the Performance
Pages must never be exploited in a reckless or dangerous manner,
which can jeopardize the user’s safety or the safety of others. Only a
safe, attentive, and skillful driver can prevent accidents.The Performance Pages include the following:
• Home
• Timers
• Gauges 1
• Gauges 2
• G-Force
• Engine
UNDERSTANDING YOUR INSTRUMENT PANEL
6

The following describes each feature and its operation:
Home
When Home is selected, the following options will be available:
• A series of six images which can be selected by the user.
• A short-cut to the SRT Drive Modes feature.Timers
When the Timers Page is selected you will be able to select from
following “Tickets”:
Recent
• Pressing the “Recent” button displays a “real time” summary of
performance timers.
Performance Pages — Home
Performance Pages — Timers
UNDERSTANDING YOUR INSTRUMENT PANEL
7

Last
• Pressing the “Last” button displays the last recorded run of perfor-mance timers.
Best
• Pressing the “Best” button displays the best recorded run of performance timers, except for braking data.
Save
• Pressing the “Save” button will let you save the ticket currently being shown. Any saved run over ten, will overwrite the last saved
run for Uconnect Radio System storage. The operation of the Save
feature is listed below:
• With a USB jump drive installed, press the “USB” button to saveruns to the jump drive.
• With an SD Card installed, press the “SD Card” to save runs to the SD Card.
•
Press the “Uconnect” button to save the runs to the Owner web page.
Performance Pages — Save
UNDERSTANDING YOUR INSTRUMENT PANEL
8

NOTE:The Uconnect Owner’s website will store up to ten timer runs.
After ten have been saved, the system will begin to replacer the oldest
entries with any newly performed entries.
• Press the “Cancel” button to view the previously displayed timer “Ticket.”
The “Tickets” contain the timers listed below:
Reaction Time
• The reaction timer measures the time from a visual cue in the cluster to when the vehicle's speed is measured to be greater than zero.
⅛ Mile (200 meter)
• Displays the time it takes for the vehicle to go an ⅛Mile
(200 meters).
¼ mile (400 meter)
• Displays the time it takes for the vehicle to go an ¼ mile (400 meters).
60 ft time
• Displays the time it takes for the vehicle to go 60 ft. Brake Distance
• Displays the distance it takes the vehicle to make a full stop.
Contains current and last data for distance and start – from speed.
NOTE: The distance measurement will be aborted if the brake pedal is
released before the vehicle comes to a complete stop.
Brake Speed
• Displays the speed the vehicle is traveling when the brake pedal is depressed.
NOTE: Brake Distance and Speed timers will only display "ready" when
vehicle is traveling at greater than 30 MPH (48 km/h).
NOTE:
• Brake Distance and Speed timers will only display "ready" when vehicle is traveling at greater than 30 MPH (48 km/h).
• To clear the timer values, use the steering wheel controls while on the specific timer page in the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL
9

Gauges 1When selected, this screen displays the following values:
Coolant Temperature
• Shows the actual coolant temperature.
Oil Temperature
• Shows the actual oil temperature.
Oil Pressure
• Shows the actual oil pressure.
SRT Performance Pages — Gauges 1
UNDERSTANDING YOUR INSTRUMENT PANEL
10

Gauges 2When selected, this screen displays the following values:
Intake Air Temp
• Shows the actual intake air temperature.
Battery Voltage
• Shows the actual battery voltage.
Transmission Temp
• Shows the actual transmission temperature.
SRT Performance Pages — Gauges 2
UNDERSTANDING YOUR INSTRUMENT PANEL
11