SRT Drive ModesYour SRT vehicle is equipped with a Drive Modes feature which allows
for coordinating the operation of various vehicle systems depending
upon the type of driving behavior desired. The Drive Modes feature is
controlled through the Selec-Track switch and may be accessed by
performing any of the following:
• Pushing the SRT button on the Selec-Track switch.
• Selecting “Drive Modes” from the “Apps” menu.
• Selecting “Drive Modes” from within the Performance Pages menu.
The SRT Drive Modes main screen displays the current drive mode and
real-time status of the vehicle’s performance configuration. The select-
able Drive Modes are Track, Sport, Auto, Snow, Tow or Custom.
Information shown will indicate the actual status of each system, along
with a vehicle graphic that displays the active drive mode status. The
color red indicates “Track,” orange “Sport,” yellow “Street” and blue
for “Snow.” These features will reset to AUTO upon an ignition cycle. If
the system status shown does not match the current drive mode set up,
a message will be displayed indicating which values are not matching
the current mode.
NOTE:Electronic Stability Control (ESC) Full-Off is only available in
Selec-Track TRACK mode and can be activated by pushing and holding
the ESC Off button on the instrument panel switch bank for five
seconds.
Drive Modes — Track
UNDERSTANDING YOUR INSTRUMENT PANEL
14
Tow ModeSelecting “Tow” with the Selec-Track switch will activate the configu-
ration for towing a trailer or hauling heavy loads in the cargo area. Once
in this mode, trailer sway control is enabled in the ESC system. The
Transmission is set to “Tow” setting highlighted in purple. Stability
Control is set to “Full” highlighted in blue. All-Wheel Drive is set to
“50/50” highlighted in blue. Steering is set to “Street” highlighted in
yellow. Suspension is set to “Sport” highlighted in orange.
Drive Modes - Tow
UNDERSTANDING YOUR INSTRUMENT PANEL
16
Snow Mode
Selecting “Snow” with the Selec-Track switch will activate snow mode
for use on loose traction surfaces. When in Snow mode (depending on
certain operating conditions), the transmission will use second gear
(rather than first gear) during launches, to minimize wheel slippage.
The Transmission is set to “Snow” setting highlighted in blue. StabilityControl is set to “Full” highlighted in blue. All-Wheel Drive is set to
“50/50” highlighted in blue. Steering is set to “Street” highlighted in
yellow. Suspension is set to “Street” highlighted in yellow.
Paddle shifters can be enabled or disabled by pressing the “Snow
Set-up” button on the touchscreen.
Drive Mode Snow
Snow Mode Set-Up
UNDERSTANDING YOUR INSTRUMENT PANEL
17
