2017 JEEP GRAND CHEROKEE display

UCONNECT SETTINGS
SRT Performance Pages
Performance Pages is an application that provides a display for perfor-
mance indicators, as received from the instrument cluster, that will
help you gain familiarity with the capabilities of your SRT vehicle in
real-time.
To access the SRT Performance Pages, press the “Apps” button on the
touchscreen, then press the “Performance Pages” button on the
touchscreen, or press “SRT Performance Pages” in the top left of the
touchscreen while in Drive Modes. Press the desired button on the
touchscreen to access that specific Performance Page.
WARNING!
Measurement of vehicle statistics with the SRT Performance Pages
is intended for off-highway or off-road use only and should not be
done on any public roadways. It is recommended that these features
be used in a controlled environment and within the limits of the law.
The capabilities of the vehicle as measured by the Performance
Pages must never be exploited in a reckless or dangerous manner,
which can jeopardize the user’s safety or the safety of others. Only a
safe, attentive, and skillful driver can prevent accidents.The Performance Pages include the following:
• Home
• Timers
• Gauges 1
• Gauges 2
• G-Force
• Engine
UNDERSTANDING YOUR INSTRUMENT PANEL
6

The following describes each feature and its operation:
Home
When Home is selected, the following options will be available:
• A series of six images which can be selected by the user.
• A short-cut to the SRT Drive Modes feature.Timers
When the Timers Page is selected you will be able to select from
following “Tickets”:
Recent
• Pressing the “Recent” button displays a “real time” summary of
performance timers.
Performance Pages — Home
Performance Pages — Timers
UNDERSTANDING YOUR INSTRUMENT PANEL
7

Last
• Pressing the “Last” button displays the last recorded run of perfor-mance timers.
Best
• Pressing the “Best” button displays the best recorded run of performance timers, except for braking data.
Save
• Pressing the “Save” button will let you save the ticket currently being shown. Any saved run over ten, will overwrite the last saved
run for Uconnect Radio System storage. The operation of the Save
feature is listed below:
• With a USB jump drive installed, press the “USB” button to saveruns to the jump drive.
• With an SD Card installed, press the “SD Card” to save runs to the SD Card.
•
Press the “Uconnect” button to save the runs to the Owner web page.
Performance Pages — Save
UNDERSTANDING YOUR INSTRUMENT PANEL
8

NOTE:The Uconnect Owner’s website will store up to ten timer runs.
After ten have been saved, the system will begin to replacer the oldest
entries with any newly performed entries.
• Press the “Cancel” button to view the previously displayed timer “Ticket.”
The “Tickets” contain the timers listed below:
Reaction Time
• The reaction timer measures the time from a visual cue in the cluster to when the vehicle's speed is measured to be greater than zero.
⅛ Mile (200 meter)
• Displays the time it takes for the vehicle to go an ⅛Mile
(200 meters).
¼ mile (400 meter)
• Displays the time it takes for the vehicle to go an ¼ mile (400 meters).
60 ft time
• Displays the time it takes for the vehicle to go 60 ft. Brake Distance
• Displays the distance it takes the vehicle to make a full stop.
Contains current and last data for distance and start – from speed.
NOTE: The distance measurement will be aborted if the brake pedal is
released before the vehicle comes to a complete stop.
Brake Speed
• Displays the speed the vehicle is traveling when the brake pedal is depressed.
NOTE: Brake Distance and Speed timers will only display "ready" when
vehicle is traveling at greater than 30 MPH (48 km/h).
NOTE:
• Brake Distance and Speed timers will only display "ready" when vehicle is traveling at greater than 30 MPH (48 km/h).
• To clear the timer values, use the steering wheel controls while on the specific timer page in the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL
9

Gauges 1When selected, this screen displays the following values:
Coolant Temperature
• Shows the actual coolant temperature.
Oil Temperature
• Shows the actual oil temperature.
Oil Pressure
• Shows the actual oil pressure.
SRT Performance Pages — Gauges 1
UNDERSTANDING YOUR INSTRUMENT PANEL
10

Gauges 2When selected, this screen displays the following values:
Intake Air Temp
• Shows the actual intake air temperature.
Battery Voltage
• Shows the actual battery voltage.
Transmission Temp
• Shows the actual transmission temperature.
SRT Performance Pages — Gauges 2
UNDERSTANDING YOUR INSTRUMENT PANEL
11

G-Force
When selected, this screen displays all four G-Force values (two lateral
and two longitudinal) as well as steering angle.When G-Force is selected, the following features will be available:
Lateral G-Force Left and Right
• The lateral g-force measures the (sideways) left and right force of the
vehicle.
Longitudinal G-Force Acceleration and Braking
• The longitudinal g-force measures the acceleration and braking force of the vehicle.
Peak G-Forces Acceleration and Braking, Left and Right
• This shows the maximum g-forces that have been achieved since the last reset from the instrument cluster display. Peak values are
maintained through ignition cycles by the instrument cluster display
until they are cleared by the driver.
NOTE: To clear peak values, use the steering wheel controls while on the
instrument cluster g-force page.
Vehicle Speed
• Vehicle Speed measures the current speed of the vehicle in either mph or km/h, starting at zero with no maximum value.
Steering Wheel Angle
•
Steering Wheel Angle utilizes the steering angle sensor to measure the
degree of the steering wheel relative to zero. The zero degree measure-
ment indicates a steering wheel straight ahead position. When the
steering angle value is negative, this indicates a turn to the left, and
when the steering angle value is positive, a turn to the right.
SRT Performance Pages — G-Force
UNDERSTANDING YOUR INSTRUMENT PANEL
12

EngineWhen selected, this screen displays the following values:
Vehicle Speed
• Shows the actual vehicle speed in mph or (km/h).
Instantaneous Power
• Shows instantaneous engine power in horsepower/kilowatts.
Instantaneous Torque
• Shows instantaneous engine torque in Pound Feet (lb/ft) or Newton-
Meters (Nm).
Oil Pressure
• Shows actual oil pressure in Pounds per Square Inch (PSI) or Kilopascals (kPa).
Gear
• Shows the current (or pending) operating transmission gear of the vehicle.
SRT Performance Pages — Engine
UNDERSTANDING YOUR INSTRUMENT PANEL
13