2017 INFINITI QX80 Quick Reference Guide

14
Head Restraint Adjustment
To raise the head restraint: Pull the head restraint up.
To lower the head restraint: Push and hold the lock knob
1 and push the head
restraint down.
Make sure the head restraint is fully engaged in position after any adju\
stment.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional operating and
feature information.
Sun Visors
1 Pull down the sun visor to block glare from the front.
2 Remove the sun visor from the center mount by lifting it
slightly and swing it to the side to block glare from the
side window.
3 Draw out the extension sun visor from the main sun
visor to block further glare.
Please see your Owner’s Manual for important safety information, syst\
em
limitations, and additional operating and feature information.
2
1
1
3

15
All power windows can be operated through the
main switch on the driver’s door.
1 Power windows open/close
2 Disable passengers’ window operation
POWER WINDOW CONVENIENCE OPENING/
CLOSING FEATURE
The power windows can be opened from outside
the vehicle using the Intelligent Key as follows:
To unlock the vehicle and open the windows
simultaneously, press and hold the
button 3 on
the Intelligent Key for about 3 seconds after
the door is unlocked.
To stop opening, release the
button 3.
The window cannot be closed using the
Intelligent Key.

Using the mechanical key:
Insert the mechanical key and turn the driver’s
door key cylinder to the rear of the vehicle for
longer than 1 second. The door is unlocked and
the window keeps opening while turning the key.
To close the windows, turn the driver’s door key
cylinder to the front of the vehicle for longer
than 1 second. The door is locked and the
window keeps closing while turning the key.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional operating and
feature information.
Windows
1
2
3
To slide the seat forward or backward, push the
switch 1 forward or backward.
To recline the seatback, push the switch
2 forward
or backward.
SEAT LIFTER
To adjust the angle of the front portion or height of the seat,
push the front or rear end of the
switch
1 up
or down.
LUMBAR SUPPORT
Push each side of the adjusting switch 3 to adjust the
seat lumbar area until the desired position is achieved.
SEAT/STEERING POSITIONING ON EXIT
The shift lever must be in P (PARK)
position with the ignition switch in
the OFF position.
The entry/exit function can be
activated or canceled by pushing
and holding the SET switch
4,
located on the driver’s side door, for more than 10 seconds.
Please see your Owner’s Manual for important safety information, syst\
em
limitations, and additional operating and feature information.
Seat Adjustments
23 1
4

16
Door Handle Lock/Unlock Features
SELECTIVE DOOR UNLOCK
Selective Door Unlock allows the driver to choose which doors will lock \
and unlock via any door
unlock operation.
When Selective Door Unlock is turned to ON, only the driver’s door is\
unlocked first after the door
unlock operation.
To reach Selective Door Unlock: 1. Place the ignition switch in the ON position.
2. In the display, select the “Settings” key. 3. Select the “Others” 1 key. 4. Select the “Comfort” 2 key.
5. Go to “Selective Door Unlock” and select the “ON” key.
When the door handle request switch on the driver’s or front passenge\
r’s side door is pushed to be
unlocked, only the corresponding door is unlocked first.
All the doors can be unlocked if the door unlock operation is performed\
again within 1 minute.
When Selective Door Unlock is turned to OFF, all the doors will be unloc\
ked after the door unlock
operation is performed once.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional operating and feature information.
Fuel-filler Door
To open the fuel-filler door, unlock the vehicle
and gently push the front side of the
fuel-filler door.
Please see your Owner’s Manual for important safety
information, system limitations, and additional operating and
feature information.
1
2

Printing June 2017 (02)
QR17EA 0Z62U1 • Printed in USA
To view detailed instructional videos, go to
www.infinitiownersinfo.mobi/2017/qx80 or snap this barcode with an appropriate barcode reader.
I N SPIRED PER F O R MAN C E
This Quick Reference Guide is intended to provide an overview of some of
the unique features of your new vehicle. Please see your Owner’s Manu\
al for
important safety information and system operation limitations. Features \
and
equipment in your vehicle may vary depending on model, trim level, optio\
ns
selected, order, date of production, region or availability. Therefore, \
you
may find information about features or equipment that are not included o\
r
installed on your vehicle.
All information, specifications and illustrations in this Quick Referenc\
e Guide
are those in effect at the time of printing. INFINITI reserves the right to change
specifications, performance, design or component suppliers without notice
and without obligation. From time to time, INFINITI may update or revise\
this
Quick Reference Guide to provide owners with the most accurate informati\
on
currently available. Please carefully read and retain, with this Quick
Reference Guide, all revision updates sent to you by INFINITI to ensure \
you
have access to accurate and up-to-date information regarding your vehicl\
e.
Current versions of vehicle Quick Reference Guides, Owner’s Manuals a\
nd
any updates can also be found in the Owner section of the INFINITI website
at https://owners.infinitiusa.com/iowners/navigation/manualsAndGuides.
If you have questions concerning any information in your Owner’s Manual,
contact INFINITI Client Support (see contact information listed above)\
.