Page 55 of 543

53
uuAirbags uTypes of Airbags
Continued
Safe Driving
Types of Airbags
Your vehicle is equipped with four types of airbags:
• Front airbags:  Airbags in front of the driver’s and front passenger’s seats.
• Driver’s knee airbag:  Airbag under the steering column.
• Side airbags:  Airbags in the driver’s and  front passenger’s seat-backs.
• Side curtain airbags:  Airbags above the side windows.
Each is discussed in the following pages.
Front Airbags (SRS)
The front SRS airbags inflate in a moderate-to-severe frontal collision to help protect 
the head and chest of the driver and/or front passenger.
SRS  (Supplemental Restraint System) indica tes that the airbags are designed to 
supplement seat belts, not replace them . Seat belts are the occupant’s primary 
restraint system.
The front airbags are housed in the center  of the steering wheel for the driver, and 
in the dashboard for the front pass enger. Both airbags are marked SRS AIRBAG.
■Housing Locations
1Types of Airbags
The airbags can inflate whenever the power mode is 
in ON.
After an airbag inflates in a crash, you may see a 
small amount of smoke. This is from the combustion 
process of the infl ator material and  is not harmful. 
People with respiratory pr oblems may experience 
some temporary discomfort. If  this occurs, get out of 
the vehicle as soon as it is safe to do so.
1 Front Airbags (SRS)
During a frontal crash severe  enough to cause one or 
both front airbags to deploy, the airbags can inflate 
at different rates, dependi ng on the severity of the 
crash, whether or not the se at belts are latched, and/
or other factors. Frontal airbags are designed to 
supplement the seat belts to help reduce the 
likelihood of head and chest injuries in frontal 
crashes.
17 CLARITY BEV CSS-31TRV6000.book  53 ページ  2017年4月14日 金曜日 午前11時 8分 
     
        
        Page 114 of 543

112
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears when the vehicle is driving out of a detected 
lane. The steering wheel vibrates rapidly.
●Appears when the vehicle is driving out of a detected 
lane.
-The steering wheel vibrates rapidly when the 
vehicle is drifting out of a detected lane.
- The steering wheel vibrates rapidly when the 
vehicle is drifting out of a detected lane. The system 
also steers the vehicle to help you remain within 
your driving lane.
●Keep the vehicle within the lane you are driving.
2 Road Departure Mitigation (RDM) System  P. 369
2 Lane Keeping Assist System (LKAS)  P. 388
●You can change the setting for the road departure 
mitigation system. Normal, Wide , and Warning Only  
can be selected.
2 Customized Features  P. 280
●Blinks when you fail to steer  the vehicle. The beeper 
sounds simultaneously.●Operate the steering wheel to resume the LKAS.
●Appears when the LKAS is  in operation, or the LKAS 
button is pressed, but there is a problem with a 
system related to the LKAS. The LKAS cancels 
automatically. The beeper  sounds simultaneously.●If the VSA®, ABS, or brake system indicator or another 
indicator comes on, take appropriate action.
2 Indicators  P. 80
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected  Warning Only
When you selected Normal or Wide
17 CLARITY BEV CSS-31TRV6000.book  112 ページ  2017年4月14日 金曜日 午前11 時8分 
     
        
        Page 129 of 543

127
Controls
This chapter explains how to operate the various controls necessary for driving.
Clock.................................................. 128
Locking and Unlocking the Doors Key Types and Functions .................. 129
Low Smart Entry Remote Signal Strength .. 130Locking/Unlocking the Doors from the Outside .......................................... 131
Locking/Unlocking the Doors from the  Inside ............................................. 137
Childproof Door Locks ..................... 139
Auto Door Locking/Unlocking .......... 140
Opening and Closing the Trunk ....... 141
Security System ................................ 144
Immobilizer System .......................... 144 Security System Alarm...................... 144
Opening and Closing the Windows ... 147
Operating the Switches Around the 
Steering Wheel POWER Button................................. 149
Turn Signals ..................................... 152
Light Switches.................................. 153
Daytime Running Lights ................... 156
Wipers and Washers ........................ 157
Brightness Control ........................... 159
Rear Defogger/Heated Door Mirror Button........................................ 160
Driving Position Memory System ...... 161 Adjusting the Steering Wheel .......... 163
Adjusting the Mirrors ....................... 164
Interior Rearview Mirror ................... 164
Power Door Mirrors ......................... 165
Adjusting the Seats .......................... 166
Front Seats ...................................... 166
Interior Lights/Interior Convenience  Items ................................................ 173
Interior Lights .................................. 173
Interior Convenience Items .............. 175
Climate Control System ................... 183
Using Automatic Climate Control .... 183
Automatic Climate Control Sensors ... 190
17 CLARITY BEV CSS-31TRV6000.book  127 ページ  2017年4月14日 金曜日 午前11 時8分 
     
        
        Page 151 of 543

149Continued
Controls
Operating the Switches Around the Steering Wheel
POWER Button
■Changing the Power Mode1POWER Button
POWER Button Operating Range
You can start the power system when the smart entry 
remote is inside the vehicle.
The power system may also start if the smart entry 
remote is close to the door  or window, even if it is 
outside the vehicle.
ON mode:
The button is on (in red), if the power system is on.
If the battery of the smart entry remote is getting 
low, the power system may not start when you press 
the  POWER  button. If the power system does not 
start, refer to the following link. 2 If the Smart Entry Remote Battery is Weak  
P. 496
Do not leave the power mode in ACCESSORY or ON 
when you get out.
Operating RangeVEHICLE OFF (LOCK)
The button is off.
The power to all electrical components is turned 
off.
Press the button.
Without pressing 
the brake pedal ACCESSORY
The button blinks (in red).
Operate the audio system and other accessories 
in this position.
ON
The button blinks (in red).
All electrical components can be used.
17 CLARITY BEV CSS-31TRV6000.book  149 ページ  2017年4月14日 金曜日 午前11
時8分 
     
        
        Page 152 of 543
150
uuOperating the Switches Around the Steering Wheel uPOWER Button
Controls
If you leave the vehicle for 30 to  60 minutes with the transmission in (P and the 
power mode in ACCESSORY, the vehicle au tomatically goes into the mode to 
VEHICLE OFF (LOCK) to avoid draining the 12-volt battery.
If you open the driver’s doo r when the power mode is set to ACCESSORY, a warning 
beep sounds.
■Automatic Power Off
■Power Mode Reminder
17 CLARITY BEV CSS-31TRV6000.book  150 ページ  2017年4月14日 金曜日 午前11 時8分 
     
        
        Page 153 of 543

151
uuOperating the Switches Around the Steering Wheel uPOWER Button
Controls
Warning buzzers may sound from inside and/
or outside the vehicle  to remind you that the 
smart entry remote is out of the vehicle. If the 
buzzer continues even after the remote is put 
back inside, place it to be within its 
operational range.
■When the power mode is in ON
If the smart entry remote is taken out of the 
vehicle, and the driver’s door is closed, a 
warning buzzer sounds from both inside and 
outside the vehicle. A warning message on 
the driver information  interface notifies the 
driver inside that the remote outside of the 
vehicle.
■When the power mode is in 
ACCESSORY
If the smart entry remote is taken out of the 
vehicle, and the driver’s door is closed, a 
warning buzzer sounds from outside the 
vehicle.
■Smart Entry Remote Reminder1 Smart Entry Remote Reminder
When the smart entry remote is within the system’s 
operational range, and the driv er’s door is closed, the 
warning function cancels.
If the smart entry remote is taken out of the vehicle 
after the power system has  been turned on, you can 
turn the power system off, but you can no longer use 
ACCESSORY mode or restart the vehicle. Always 
make sure if the remote is in your vehicle when you 
operate the POWER  button.
Removing the smart entry remote from the vehicle 
through a window does not  activate the warning 
buzzer.
Do not put the smart entr y remote on the dashboard 
or in the glove box. It may cause the warning buzzer 
to go off. Under some  other conditions that can 
prevent the vehicle from locating the remote, the 
warning buzzer may al so go off even if the remote is 
within the system’s  operational range.
17 CLARITY BEV CSS-31TRV6000.book  151 ページ  2017年4月14日 金曜日 午前11 時8分 
     
        
        Page 154 of 543
152
uuOperating the Switches Around the Steering Wheel uTurn Signals
Controls
Turn Signals
The turn signals can be  used when the power 
mode is in ON.
■One-touch turn signal
When you lightly push up or down and release 
the turn signal lever, th e exterior turn signals 
and turn signal indicator blink three times.
This feature can be used  when signaling for a 
lane change.
Right Turn
Left Turn
17 CLARITY BEV CSS-31TRV6000.book  152 ページ  2017年4月14日 金曜日 午前11 時8分 
     
        
        Page 155 of 543

153
uuOperating the Switches Around the Steering Wheel uLight Switches
Continued
Controls
Light Switches
Rotating the light switch turns the lights on 
and off, regardless of the power mode 
setting.
■High beams
Push the lever forward until you hear a click.
■Low beams
When in high beams, pull the lever back to 
return to low beams.
■Flashing the high beams
Pull the lever back, and release it.
■Manual Operation1 Light Switches
If you leave the power mode  in VEHICLE OFF (LOCK) 
while the lights are on, a chime sounds when the 
driver’s door is opened.
When the lights are on, the  lights on indicator in the 
instrument pane l will be on.
2 Lights On Indicator P. 92
Do not leave the lights on  when the power system is 
off because it will caus e the 12-volt battery to 
discharge.
If you sense that the le vel of the headlights is 
abnormal, have the vehi cle inspected by an 
authorized Honda Clarity Electric dealer.
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker, 
tail, and rear license plate lights
Turns on headlights, parking, 
side marker, tail, and rear 
license plate lights
17 CLARITY BEV CSS-31TRV6000.book  153 ページ  2017年4月14日 金曜日 午前11 時8分