2017 FIAT 500X navigation

cards for navigation exclusively
separate from SD cards for MP3 use
exclusively). Avoid transferring content
from one SD card to another.
AUX SUPPORT
To activate AUX mode, connect an
appropriate device to the AUX socket
on the vehicle.
Adjust the volume using the
(ON/OFF) button/knob on the front
panel or using the volume adjustment
control on the connected device.
IMPORTANT
The functions of the device connected
with the AUX socket are directly
managed by the device itself: it is not
possible to change track/folder/playlist
or control playing start/end/pause with
the controls on the front panel or on the
steering wheel.
Do not leave the cable of your portable
player connected to the AUX socket
after disconnection, to avoid possible
hiss from the speakers.
PHONE MODE
PHONE MODE
ACTIVATION
Press the PHONE button on the front
panel to activate the Phone mode.
The buttons on the display can be used
to:
compose the phone number (using
the graphic keypad on the display);
display and call the contacts in the
mobile phone phonebook;
display and call contacts from the
registers of recent calls;
pair up to 10 phones to make access
and connection easier and quicker;
transfer calls from the system to the
mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the vehicles’s audio system; the
system automatically mutes the radio
when the Phone function is used.
NOTE For the list of compatible mobile
phones and functions supported,
consult the www.driveuconnect.eu
website
PAIRING A MOBILE
PHONE
Proceed as follows:
activate theBluetooth®function on
the mobile phone;
press the PHONE button on the front
panel;
if no phone is paired with the system
yet, the display shows a dedicated
screen;
select "Yes" to start the pairing
procedure, then search for the
Uconnect™device on the mobile
phone (if "No" is selected, the Phone
main screen is displayed);
when prompted by the mobile
phone, use its keypad to enter the PIN
code shown on the system display or
confirm on the mobile phone the PIN
displayed;
from the “Phone” screen you can
always pair a mobile phone by pressing
the “Settings” button: press the “Add
Device” button and proceed as
described above;
during the pairing stage a screen is
displayed showing the progress of the
operation;
when the pairing procedure is
completed successfully, a screen is
displayed: answer "Yes" to the question
to pair the mobile phone as favourite
(the mobile phone will have priority over
all other mobile phones to be paired
259

CLOCK
Pressing the time at the middle of the
top of the display allows you to set the
time.
General information
The general information about the
vehicle is displayed in the central part of
the display:
the outside temperature, expressed
in the selected unit of measurement;
mobile phone battery charge (when a
mobile is paired);
theicon (if aBluetooth®device is
connected);
phone network signal intensity (if a
mobile phone is connected).
COMPASS
Press the "Compass" button to display
the direction in which you are driving
and "Navigation mode" information.
TRIP
Press the "Trip" button to access the
screens containing the Trip Computer
information processed by the
instrument panel.
UconnectTM LIVE(if present)
By pressing the "Uconnect™LIVE"
buton, you can access the
Uconnect™LIVEservices. For further
information, see paragraphUconnect™5" Radio LIVE /
Uconnect™5" Radio Nav LIVE.
SETTINGS
Press thebutton on the front panel
to display the "Settings" menu.
NOTE The menu items displayed can
vary according to the versions.
The menu includes the following items:
Display;
Units;
Voice commands;
Clock & Date;
Safety & Driving Assistance;
Lights;
Doors & Locks;
Vehicle Shutdown Options;
Audio;
Phone/Bluetooth;
Sirius XM Setup (where provided);
Radio Setup;
System Information;
Restore Default Settings;
Clear Personal Data.
Driving safety and assistance
(where provided)
This function can be used to carry out
the following adjustments:
"Rear View Camera" (where
provided): allows you to activate the
display of images from the camera
when reverse is engaged.
"Rear view camera delayed
deactivation" (where provided): allows
you to delay the disappearance of
images from the rear camera when
reverse is disengaged.
"Guidelines for load platform camera"
(where provided): allows you to activate
dynamic grids that indicate the route of
the vehicle.
"Frnt Coll. Warning" (where
provided): allows you to select the Full
Brake Control system operation mode.
The options available are:
- "Off": the system is deactivated;
- "Only warning": the system intervenes
only by providing the driver with a
warning (where provided);
- "Only active braking": the system
intervenes by activating automatic
braking (where provided);
- "Warning + active braking": the
system intervenes by providing the
driver with a warning and activating
automatic braking.
"Forward Collision System
Sensitivity" (where provided): allows you
to select the intervention readiness for
the system according to the distance of
the obstacle. The options available are
"Near", "Med", "Far".
"Park Assist" (where provided):
allows you to select the type of warning
provided by the Park Assist system.
261

To activate the main navigation menu,
press the NAV button on the front
panel, then press one of the following
buttons on the screen:
"Where to?": to find or navigate to
the destination;
"View map": to display the map;
"Info": to display all the navigation
information;
"Emergency": to search for Hospitals
or Police Stations located near the
destination. It is also possible to view
your current position on the display and
save, in "Favourites", the location of the
Hospitals or Police Stations.
VIEW MAP
Press the "View Map" button in the
main Navigation Menu to display the
map relative to the current position.
When the display shows the map, the
following options are available:
"Menu": press this button to return
to the main Navigation Menu;
"+/–": press the "+" or " –" button to
change the dimension of the map (it is
not possible to zoom in on minor
roads);
"Time of Arrival/Time to
Destination/Distance"(only during
navigation): press this button at the top
right of the display to view one of the
following options: "Time of Arrival",
"Time to Destination", "Distance".
"Turn List"(only during navigation):
press the list of turns along the route at
the middle of the top of the display.
Select a turn through the following
options: "Show on Map" or "Avoid
Street".
"Options": press this button to
display the map display options.
INFORMATION
Press the "Information" button in the
main Navigation Menu to select from
the following information:
Where Am I?
Traffic
"Trip comp." (Trip Computer)
You can press the
button to return
to the previously active screen or the
"X" button to exit.
EMERGENCY
Press the "Emergency" button in the
main Navigation Menu to select one of
the following options for searching for
and navigating towards a destination:
"Hospital": press this button to set a
trip to a hospital near the destination;
"Police": press this button to set a
trip to a police station near the
destination.
263
NAVIGATION MAIN MENU
IMPORTANT Navigation maps are
pre-loaded on the system, therefore no
external support is needed.
NOTE To update the navigation maps,
contact a Fiat Dealership.

264
MULTIMEDIA
VOICE CONTROLS
For the functions controlled with voice
commands see theUconnect™5"
Radio Nav LIVE"Voice commands"
paragraph.
NOTE For languages not supported by
the system, voice commands are not
available.
IMPORTANT The volume of the voice
commands can only be adjusted while
they are being reproduced by operating
button/knob
(ON/OFF).
The navigation system uses voice
commands for some or all of the
following functions:
driving information;
set warnings.
Two types of voices are available during
navigation:
computer voices: they are generated
by the navigation system. They read
answers to voice commands and traffic;
human voices: that have been
recorded by an actor and only provide
instructions about the route.