2017 Citroen C3 Owner's Manual

47
B618_en_Chap01_Instruments-de-bord_ed01-2016
Driving functions tab
Corresponding functionComments
Stop & Star t Activation/deactivation of the function.
Parking sensors Activation/deactivation of the function.
Traction control Activation/deactivation of the function
Blind spot sensors Activation/deactivation of the function.
Under-inflation initialisation Reinitialisation of the under-inflation detection system.
Adjusting Speeds Memorisation of speed settings for the speed limiter or the cruise control.
Diagnostic List of current alerts.
For more information on one of these functions, refer to the corresponding section.
1
Instruments

48
ButtonComments
Turn off the screen.
Adjustment of brightness.
Choice and settings for three profiles.
Settings for the touch screen.
Activation and adjustment of Wi-Fi settings.
Configuration
The functions available through this menu are detailed in the table below. Certain adjustments are accessible in the secondary page.
Instruments

49
B618_en_Chap01_Instruments-de-bord_ed01-2016
ButtonComments
Adjustment of the display settings (scrolling of text, animations, etc.) and brightness.
Choice of units:
-

t
emperature (°Celsius or °Fahrenheit)
-

d
istance and fuel consumption (l/100 km, mpg or km/l).
Choice of language used for the touch screen.
Setting the date and time.
1
Instruments

50
Trip computer
System that gives you information on the current journey (range, fuel consumption…).
Display of information
These are displayed in turn:
- T rip distance.
-
Ra

nge.
-

C
urrent consumption.
-
A

verage speed.
-

S
top & Start time counter.
-

S
peed limit recognition information. F

P
ress the button on the end of the wiper
control stalk . F

P
ress the thumbwheel on the steering
wheel.
Instruments

51
B618_en_Chap01_Instruments-de-bord_ed01-2016
Trip reset
F Press the button on the end of the wiper control stalk for more than two seconds. F
P ress the thumbwheel on the steering
wheel for more than two seconds. F
P ress this button for more than
two seconds.
The reset is carried out when the trip is displayed.
1
Instruments

52
A few definitions…
Range
(miles or km)
This value may vary following a change
in the style of driving or the relief,
resulting in a significant change in the
current fuel consumption.
When the range falls below 20 miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the
range is recalculated and is displayed if it
exceeds 60 miles (100 km). This function is only displayed from
20
mph (30 km/h).
Current fuel
consumption
(mpg or l/100 km or km/l)
Distance travelled
(miles or km)
Stop & Star t time counter
(minutes / seconds or hours /
minutes)
A time counter calculates the time spent in
STOP mode during a journey.
It resets to zero every time the ignition is
switched on.
Average fuel consumption
(mpg or l/100 km or km/l)
Calculated since the last trip computer reset.
If dashes are displayed continuously
while driving in place of the digits,
contact a CITROËN dealer or a
qualified workshop.
The distance which can still be travelled with
the fuel remaining in the tank (at the average
fuel consumption seen over the last few miles
(kilometres) travelled).
Calculated over the last few seconds.
Average speed
(mph or km/h)
Calculated since the last trip computer reset. Calculated since the last trip computer reset.
Instruments

53
B618_en_Chap01_Instruments-de-bord_ed01-2016
Lighting dimmer control
Tw o b u t t o n s
With the exterior lighting on, press button A
to increase the brightness of the instruments
and controls and the interior mood lighting or
button B to reduce it.
As soon as the lighting reaches the required
level of brightness, release the button.
Touch screen
F In the Configuration menu, select
" Brightness ".
F

A
djust the brightness using the arrows or
by moving the cursor.
Allows the manual adjustment of the brightness of the instrument panel and touch screen to suit the
ambient light level.
Operates only when the vehicle lighting is on, with the exception of the daytime running lamps.
1
Instruments

54
Setting the date and time
With audio system
Without audio system
F Press the MENU button for access to the
main menu.
F

P
ress the " 7" or " 8" button to select the
"Personalisation-configuration" menu, then
the "OK" button.
F

P
ress the " 5" or " 6" button to select the
"Display configuration" menu, then the
"OK" button.
F

P
ress the " 5" or " 6" button to select the
"Date and time adjustment" line, then the
"OK" button.
F

P
ress the " 7" or " 8" button to select the
setting to change. Confirm by pressing the
"OK" button.
F

A
djust the settings one by one, confirming
by pressing the "OK" button.
F

P
ress the " 5" or " 6" button, then the "OK"
button to select the "OK" box and confirm
or press the "Back" button to cancel.
With CITROËN Connect
Radio
F Select the Settings menu.
F

Sel

ect " System configuration ".
You can set the date and time from the
instrument panel display. F

Sel

ect " Date " or "Time ".
F

C

hoose the display formats.
F

C

hange the date and/or the time using the
numeric keypad. F

Sel
ect "Date and time ".
F

P
ress this button to confirm.
F

P

ress and hold this button.
F

P

ress this button briefly to
confirm.
F

P

ress one of these buttons to
select the setting to change.
F

P

ress one of these buttons to
change the setting and confirm
again to save the change.
Instruments