Page 5 of 306

3
.
.Starting-switching off the engine 102
Parking brake 1 05
Manual gearbox
1
05
Electronic gearbox
1
06
Automatic gearbox (EAT6)
1
10
Gear shift indicator
1
15
Stop & Start
1
16
Speed limiter
1
19
Cruise control
1
22
Rear parking sensors
1
25
Reversing camera
1
27
Fuel
129
Misfuel prevention (Diesel)
1
30
Compatibility of fuels
1
31
AdBlue
® and SCR system (Diesel BlueHDi) 1 32
Snow chains 1 36
Energy savings mode
1
37
Changing a window wiper
1
38
Towing a trailer
1
39
Advice on care and maintenance
1
40
Roof bars
1
40
Bonnet
141
Engines
142
Checking levels
1
43
Checks
1
46
Running out of fuel (Diesel)
1
48
Temporary puncture repair kit
1
49Spare wheel
1
54
Changing a bulb
1
61
Changing a fuse
1
67
12 V batter y
1
72
Towing the vehicle
1
77
Engines and specifications
1
79
Weights and towed loads
1
79
Dimensions
182
Identification markings
1
83
Audio system / Bluetooth
1
84
Audio system 2 08To find out about the
CITROËN Connect
Nav or the CITROËN Connect Radio,
please visit:
http://service.citroen.com/ddb/
Driving
Practical information In the event of a breakdown
Technical dataAudio and telematics
Alphabetical index
.
Contents
Page 7 of 306
5
Interior
1
Boot fittings
6
3
-
s
torage box
Tank AdBlue
® 132-13 5
2
Rear seat
4
8- 49
3
Front seats
4
6 - 48
4
Airbags
8
3-85
5
Interior fittings
6
0-62
-
s
un visor
-
g
love box
-
f
ront armrest
-
U
SB port
-
1
2 V accessory socket / cigarette lighter
-
ashtray
Deactivating the passenger's front airbag
9
0
6
Safety belts
8
0-82
7
Child seats
87
-96
ISOFIX child seats
9
7-100
Mechanical child lock
1
00
.
Over view
Page 10 of 306
8
Maintenance - Technical data
7
Petrol weight
1
80
Diesel weight
1
81
8
Identification elements
1
83
Dimensions
1
82
1
Checking the levels
1
43 -145
-
oil
-
b
rake fluid
-
coolant
-
s
creenwash fluid
-
a
dditive (diesel with particle filter)
Checking the components
1
46-147
-
battery
-
a
ir/passenger compartment filter
-
o
il filter
-
p
article filter (diesel)
-
b
rake pads/discs
2
Running out of Diesel fuel
1
48
AdBlue
® and SCR
(Diesel BlueHDi) system 1 32-135
3
Battery
1
72-176
Load reduction, economy mode
1
37
4
Engine compartment fuses
1
67-171
5
Opening bonnet
1
41
Under bonnet layouts, petrol
1
42
Under bonnet layout, Diesel
1
42
Petrol engines
1
80
Diesel engine
1
81
6
Changing bulbs
1
61-166
-
front
-
rear
Over view
Page 13 of 306
11
Instrument panel for petrol - Diesel
Dials
1Rev counter (x 1,000 rpm).
2 Screen.
3 Speedometer (mph or km/h).
4 Reminder:
of servicing information,
remaining driving range with the
emissions fluid (AdBlue
®).
Reset the selected function to zero (trip
distance recorder or service indicator).
Adjust the time.
Display screen
AElectronic or automatic gearbox
information.
Gear change indicator.
BTime.
CRange related to the fuel or theAdBlue® and
the SCR system (miles or km).
or
Trip distance recorder.
DFuel gauge / Diesel preheater.
EService indicator (miles or km)
then,
Odometer.
These two functions are displayed
successively when switching on the ignition.
FCruise control or speed limiter setting.
1
Instruments
Page 22 of 306

20
Warning / indicator lampStateCause Action / Observations
AdBlue
®
(BlueHDi Diesel)Fixed, on switching
on the ignition,
accompanied by an
audible signal and a
message indicating the
remaining driving range.The remaining driving range is
between 350 miles (600 km) and
1,500 miles (2,400 km). Have the AdBlue® tank topped-up as soon as
possible: go to a CITROËN dealer or a qualified
workshop, or carry out this operation yourself.
or
Flashing, associated
with the SERVICE
warning light,
accompanied by an
audible signal and a
message indicating the
remaining driving range.The remaining driving range
is between 0 and 350 miles
(6 0 0
k m). Yo u must
top-up the AdBlue® tank to avoid a
breakdown : go to a CITROËN dealer or a qualified
workshop, or carry out this operation yourself.
Flashing, associated
with the SERVICE
warning light,
accompanied by an
audible signal and a
message indicating that
starting is prevented.The AdBlue® tank is empty:
the starting inhibition system
required by legislation prevents
starting of the engine. To be able to start the engine, you must
top-up the
AdBlue® tank: go to a CITROËN dealer or a qualified
workshop, or carry out this operation yourself.
It is essential to add at least 3.8 litres of AdBlue
® to
the fluid tank.
Instruments
Page 23 of 306

21
Warning / indicator lampStateCause Action / Observations
or SCR emissions
control system
(BlueHDi Diesel)
Fixed, on switching
on the ignition,
associated with the
Service and engine
diagnostic warning
lights, accompanied
by an audible signal
and a message. A fault with the SCR emissions
control system has been
detected.
This alert disappears once the exhaust emissions
return to normal levels.
Flashing, on switching
on the ignition,
associated with the
Service and engine
diagnostic warning
lights, accompanied by
an audible signal and
a message indicating
the remaining driving
range.After confirmation of the fault
with the emissions control
system, you can continue driving
for up to 650 miles (1,100 km)
before the engine starting
inhibition system is triggered.Contact a CITROËN dealer or a qualified workshop
without delay , to avoid a breakdown .
Flashing, on switching
on the ignition,
associated with the
Service and engine
diagnostic warning
lights, accompanied
by an audible signal
and a message. You have exceeded the
authorised driving limit following
confirmation of a fault with the
emissions control system: the
engine starting inhibition system
prevents starting of the engine.
To be able to start the engine, you must
call on a
CITROËN dealer or a qualified workshop.
1
Instruments
Page 27 of 306

25
Service indicator
For BlueHDi Diesel versions, the degree
of deterioration of the engine oil is also
taken into account (depending on the
country of sale).
When the ignition is switched on, no service
information appears in the screen.
More than 1,800 miles (3,000 km)
remain before the next service is due
Between 600 miles (1,000 km) and 1,800 miles
(3,000 km) remain before the next service is due
The spanner symbolising the service
operations illuminates for 5 seconds when the
ignition is switched on. The distance recorder
display line indicates the distance remaining
before the next service is due.
Example: You have 1,700 miles (2,800 km) left
before the next service is due.
For 5 seconds after the ignition is switched on,
the screen indicates:
Less than 600 miles (1,000 km) remain
before the next service is due
Example: You have 560 miles (900 km) left
before the next service is due.
For 5 seconds after the ignition is switched on,
the screen indicates:
5 seconds after the ignition is switched on,
the total distance recorder resumes its normal
operation. The servicing spanner remains on
as a reminder that a service is required soon.
System which informs the driver when the
next service is due, in accordance with the
manufacturer's servicing schedule.
The point at which the service is due is
calculated from the last reset of the service
indicator, according to the mileage covered and
the time elapsed since the last service.
5 seconds after the ignition is switched on,
the spanner goes off
; the distance recorder
resumes its normal operation. The screen then
indicates the total distance.
1
Instruments
Page 28 of 306

26
The servicing interval has been exceededFor 5 seconds after the ignition is switched
on, the spanner flashes to indicate that
the service must be carried out as soon as
possible.
Example: the service is overdue by 186 miles
(3 0 0 k m).
For 5 seconds after the ignition is switched on,
the screen indicates:
5 seconds after the ignition is switched on,
the total distance recorder resumes its normal
operation. The spanner remains on .
For BlueHDi Diesel versions, this alert
is also accompanied by the continuous
illumination of the Service warning light
when the ignition is switched on. The remaining mileage may be weighted
by time according to the driver’s driving
habits.
The spanner may therefore also come
on if you have exceeded the period
since the last service, as indicated in the
manufacturer's service schedule.
For BlueHDi Diesel versions, the spanner
may also come on early, depending on the
degree of deterioration of the engine oil
(depending on the country of sale).
The degree of deterioration of the engine
oil depends on the driving conditions in
which the vehicle is used.Resetting the service indicator
The service indicator must be reset after each
service.
The procedure for resetting to zero is as
follows:
F
S
witch off the ignition.
F
P
ress the trip distance recorder reset
button and keep it pressed.
F
S
witch the ignition on; the distance
recorder display starts a countdown.
F
R
elease the button when =0 is displayed;
the spanner disappears.
Following this operation, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the zero
reset to be taken into account.
Retrieving the service
information
You can access the service information at any
time.
F
P
ress the trip distance recorder reset
button. The service information is
displayed for a few seconds, then
disappears.
Instruments