2017 AUDI Q5 buttons

CD
CD
.... N ,-... N ..... 0 0 C<'. 00
(!) Memory buttons (driver's seat)
@ Door handle
@ Power locking switch ......... .
© Side assist button ............ .
® Air outlets ..... ........ .... . .
@ Turn signal and high beam ... .. .
(j) Multifunction steering wheel with:
- Horn
- Driver's airbag ............ . .
- Audio/video, telephone, naviga-
tion and voice recognition but ­
tons
- Rocker switches for tiptronic op-
eration .. ............ ..... .
@ ISETI button ............... .. .
® Instrument cluster ........... .
@ Reset button for trip odometer
@ Switches for:
- Windshield wiper/washer
- Trip computer ............ .. .
@ Ignition lock ................ .
@ Adjustable steering column
@ Control lever for:
- Cruise control ............ .. .
- Adaptive cruise control ...... .
@ Data Link Connector for On Board
Diagnostics (OBD II) .......... .
@) Release lever for the engine hood
@ Instrument illumination ..... .. .
@ Light switch ............... .. .
@) Switch for unlocking the trunk lid
@ Adjuster control for outside
mirrors ..................... .
@ Power window switches ....... .
@ Radio system or Audi multimedia
(see separate manual)
@ Radio or MMI display (see separate
manual) 62
39
118
78
52
152
98
9
8
10
54
19
81
81
92
109
23
217
53
49
40
56
43
@ Button/Indicator light for:
- Emergency flasher .......... .
- PASSENGER AIR BAG OFF
@ Glove compartment (lockable) ...
@ Front passenger's airbag
@ Depending on options:
- Audi drive select button ...... .
- Start-Stop-System button or .. .
- Id'! button (hybrid drive) ..... .
- Parking system button ....... .
- Elect ronic Stabilization Control
(ESC) button . .............. .
- Hill descent assist button .... .
@ Climate control .. ............ .
@ Shift lever for automatic transmis-
sion ....... .. .............. .
@ Ashtray with cigarette lighter
@ Coin storage
@ Depending on options:
- MMI control console or
- Parking system button ....... .
- E lectronic Stabilization Control
(ESC) button . .. ............ .
Cockpit
51
75
152
122
88
103
125
186
188
77
94
73, 73
125
186
- Hill descent assist button . . . . . 188
-Audi drive select button . . . . . . . 122
- Start-Stop-System button . . . . . 88
@ I START ENGINE STOP! button . . . 84
@> Electromechanical parking brake 86
(D Tips
Some of the equipment or features shown in
the general illustration may be standard
equipment on your vehicle or may be optional
equipment depending on your model. Always
ask your authorized Audi dealer if you have a
question about your vehicle.
7

Opening and closing th e sunshade
• To automat ica lly open the sunshade complete ­
l y, briefly press the switch@ in the desired ar­
row direction .
• To stop the sunshade in an intermediate posi­
tion, press the switch again, or
• Press and hold the switch in the desired arrow
direction.
• Release the switch when sunshade is at desired
pos it ion .
After the ign ition is switched off, you can still op­
erate the Panoramic sliding sunroof for about 10
minutes . As soon as the driver's or passenger's
door is opened, the switch is inoperative.
The power sunshade can also be closed when the
Panoram ic sliding sunroof is open.
A WARNING
Pay careful attent ion when closing the Panor­
am ic sliding sunroof -otherwise ser ious injury
could result! For this reason, always remove
the ignition key when leaving the vehicle.
@ Note
Always close your Panoramic sl iding sunroof
when leaving your vehicle . Sudden rain can
cause damage to the interior equipment of
your veh icle, particular ly the electronic equip­
ment .
@ Tips
Information regarding convenience opening/
clos ing
~ page 44.
Emergency closing of the Panoramic sliding
sunroof
Applies to: veh icles with Panoramic sliding sunroof
If the Panoramic sliding sunroof detects an ob­
ject in its path when it is closing, it will open
again automat ically. In this case, you can close
the roof with the power emergency closing func­
tion .
a,
~ • Within five seconds after the sunroof opens au-
~ tomatically, pull the switch until the roof
8 closes . 0
0:
co
Openin g an d clos ing
Garage door opener
(Homelink)
Description
Applies to: vehicles with garage door opener (Home link)
Fig. 42 Garage door opener: examples of using with differ­
ent systems
You can activate various systems such as garage
doors, security systems and home lighting from
inside your vehicle using the garage door opener
(Homelink) . There are three buttons for th is in
the vehicle headliner that can be in used in place
of up to three hand-held transmitters .
To operate systems using the garage door open­
er, the three buttons in the roof headliner must
be programmed first.
A WARNING
-
Make sure no peop le or objects are in the im-
mediate vicinity of the equipment when using
or p rogramm ing the ga rage door opener. Peo­
p le can be injured and objects can be dam­
aged if they are caught in the equipment.
(¼} Tips
- For security reasons, we recommend that
you clear the programmed buttons befo re
selling the vehicle .
- For add itiona l information about Homelink,
visit www.homelink.com.
- For Declaration of Compliance to United
States FCC and Indust ry Canada regulations
~page 279.
45

Opening and clo sin g
Operation
Applies to: ve hicles w ith garage door opener (Homelink)
F ig. 43 Hea dlin er: co ntrol uni t
Requirement: The buttons in the roof headliner
must be programmed
Q page 46 or
¢
page 47 and the vehicle must be within
range of the system, such as the garage door
ope ner.
• Press the button to open the garage door . The
L E D @ blinks or turns on .
• Press the button again to close the garage
door .
@ Tips
To open o r close the garage door, press the
button, but do not hold it fo r lo nger than
10 seconds o r th e ga rage door opener module
w ill switch to prog ramming mode.
Programming the buttons (version A)
Applies to: ve hicles with ga rage doo r opener (Homeli nk}
You can program both fixed code and rolling code
systems using this procedure .
Programming or reprogramming buttons
• Switc h the ign ition on.
• Press and hold the but ton in the roo f headline r
¢
page 46, fig. 43 that you would like to pro ­
gram fo r at least 10 seconds. Or
• Se lect :
ICAR I function button> Car sys tems*
cont ro l button > Vehicle sett ing s > Garage
door opene r> Program garage door opener .
If
this path is not available, program the button
as descr ibed in version B ¢
page 47.
• Fo llow the inst ructions i n the MM I*.
46
Erasing button programm ing
The prog rammed but tons cannot be erased ind i­
vidually . They must a ll be erased toge ther . Re­
program the buttons if necessary.
• Sele ct:
I CAR I func tion b utton > Car sy ste m s*
con trol b utton > Vehicle setting s > Garage
door opener > Clear program setting s > Yes.
Displaying the version /status/country code
• Select: !CAR ! function button> Ca r sy stems *
control button > Vehicle setting s > Garage
door opener > Ver sion informa tion .
@ Tips
-Prog ramming through the MMI* i s not pos­
sible wi th all infot ainm ent systems.
If th is
is the case, program the buttons as descri­
bed in vers ion B ¢
page 47.
- T he required distance between the hand
transmitte r and the Homelink module in
the radiator grille ¢
page 47, fig. 44 de­
pends on the system that you are program­
ming.
- Depending on the mode l of the system, you
may need to release the b utton on the re­
mote contro l dur ing programming and
press it again. Hold each position you try for
at least 15 seconds before trying another
posit ion . Keep the turn s ignals on your vehi ­
cle in view when doing this .
- After programm ing the garage door opener,
it may be necessary to synchron ize the mo­
tor with the sys tem . Refer to the manufac­
t u rer 's ins truct ions.

a,
a,
..... N r-­N ..... 0 0
0:
co
Programming the buttons (version B)
Appl ies to: ve hicles with garage door opener (Homelink)
Fig . 44 D ist an ce betwee n the rad ia to r grill e and th e h and
tra nsmi tter
Programming the button: Part 1 with the
controls
1. Switch the ignition o n.
2 . Press and ho ld both outer buttons in the roof
headliner
c::> page 46, fig. 43 unti l the LED @
turns off completely (after about 20 sec­
onds). T his procedure clears the standard co­
des that were set at the factory and does
not
need to be repeated aga in to program the
other buttons .
3 . Briefly p ress t he b utton on the roof headline r
th at yo u wou ld like to prog ram.
4 . Wait un til the LED@ begi ns to blink quick ly .
Programm ing mode is ac tive for 5 minutes .
5 . Move in front of yo ur vehicle while holding
the orig inal remote contro l for the system
that would like to program to a button in the
roof headliner.
Programming the button : Part 2 at the
radiator gr ille
6 . Hold the remote control up to the radiator
grille on your vehicle¢
fig. 44.
7. Press and ho ld the remote control until t he
turn signals on yo ur vehicle bl ink . Th is may
tak e up to 30 seconds .
8 . If t he emergen cy f lashers blink th ree times,
the progr amming wa s suc cessful.
If t h e
emergency f las her s only blink one time, the
5 minute time limit for t he p rogramm ing has
ended o r the programm ing was not success­
f ul. Repeat the programming from the third
step, o r try changing the distance to the radi­
ator grille.
Open ing and closing
9 . If the garage door or o ther sys tem does not
open using the b uttons in the roof head liner
even tho ugh the programming was success­
ful, the system may use a ro lling code in­
stead of a fixed code.
Rolling code program­
ming
must be perfo rmed c::> page 48.
The other two buttons in the roof hea dliner can
be programmed according to the inst ruct ions
above. Beg in with the third step.
Eras ing button prog ramming
T he programmed but tons can not be erased in di­
vidually . They must a ll be erase d together . Re­
program the buttons if necessary .
"' Switch th e ignit ion on.
"' Press and hold both ou ter but tons i n the roo f
headliner until the LED @turns off complete ly
(after about 20 seconds).
Reprogramming the buttons
"' Swit ch th e ignit ion on.
"' To reprogram an indivi dual but ton, p ress and
hold the button unti l the LED @starts to flash
quickly (afte r about 10 seconds) . Release the
button immediate ly. Prog ramming mode is ac­
tive for 5 m inutes.
"' Continue w ith the fifth step.
@ Tips
- Prog ramming using the buttons in t he roof
head liner is not poss ible with a ll Infota in­
ment systems . If this is the case, p rogram
t he b uttons as described in vers io n A
c::> page 46.
- T he required distance between t he hand
t ra nsmitte r and t he Homelink module in
t he radia tor grille ¢
fig. 44 depend s on th e
syste m th at y ou ar e pr og ra mming.
- De pending on the mo de l of t he syst em, you
m ay need to re lea se th e butt on o n the re­
m ot e co ntrol dur ing progra mmin g an d
p ress it a gain. Hol d each position y ou try for
a t l east 15 seco nds befo re t rying a nother
p osit ion . Keep the turn s ignals on your veh i­
cle in view whe n doin g this.
47

Opening and closing
Rolling code programming
Applies to: vehicles w ith garage door opener (Homeli nk)
Rolling code programming is also needed for
some systems.
Identifying a rolling code
"' Press and hold the button in the roof headliner
that was already programmed .
"' Watch the LED @
c:> page 46, fig. 43. If the LED
blinks qu ickly, the systems (such as a garage
door) is equ ipped with a rolling code.
"' Program the rolling code as follows:
Activating the motor unit in a system
"'Locate the programming button on the sys-
tem's motor unit. The exact location and color
of the button may vary depending on the brand
of the system .
"'Pr ess the programm ing button on the ga rage
doo r opener motor unit (this w ill usually acti­
vate an "indicator" on the motor unit). You now
have approximate ly
30 seconds to program the
button in the roof headliner.
Programming the button in the roof
headliner
"' Press and hold the previously programmed but­
ton in the roof headliner for 2 seconds .
"' To end rolling code programming, press and
hold the button again for two seconds .
"' With some systems, the button may need to be
pressed a third time to end the programming
process .
After programming, the system should detect
the signal and begin mov ing when the button in
the roof headliner is pressed . Now you may pro ­
gram the other buttons as needed .
(D Tips
-The rolling code can be programmed more
quickly and more easily with the help of a
second person.
- If you have difficulty programming the roll­
in g code, referring to the user guide for the
system may help .
48

Sea ts and stor age
Memory function
Memory for driver's seat
Applies to: vehicles with seat memory
The seat adjustment settings for two drivers can
be stored using the memory buttons in the driv ­
e r's door.
F ig . 64 Dr ive r's doo r: Sea t memory
i ci: co a,
In addition to the setting for the drive r's seat,
the exterior rear view mirror setting can be stor­ ed and recalled through seat memory if the vehi­
cle is properly equipped .
Storing and re calling s ettings
With the help of the memory buttons 1 and 2
c> fig . 64 the settings for two different drivers
can be stored and recalled
¢ page 62.
The cu rrent se ttings are also automatically as ­
signed to the remote contro l key being used
when the vehicle is locked . When the vehicle is
un locked , the settings assigned to the remote
control key being used are automatically recal­
led.
Tu rnin g se at memo ry on and off
If the IO FFI switch is depressed, the seat memory
is inoperative. When the Memory function is off,
the LED in the button lights up.
All t he s tored se tt ings are retai ned. We recom­
mend using the
I O FF I sw itch and deactivating the
seat memory if the vehicle is on ly going to be
used
temporarily by a driver whose settings are
not going to be stored.
62
Stor ing and recalling settings
Applies to: vehicles with seat memory
Storing settings
.,. Adjust the driver's seat .
.,. Adjust the two exterior mirrors.
.,. Press the
ISETI button . The light in the button
w ill come o n.
.,. Now press a memory button
dII or I]]) . If the
storing procedu re is correct, a confirmation
tone will sound.
Recalling settings
"' If the driver's door is open and the ignition is
sw itched off, tap the corresponding memory
button briefly .
.,. If the driver's door is closed or the ignition is
switched on, press the appropriate memory
button until the stored position is reached .
Successful storage is confirmed audib ly and by
the light in the
ISE TI button illuminating
c> page 62, fig. 64 .
When the vehicle is locked , the current settings
are stored and assigned to the remote control
key . But the settings stored on memory buttons
1 to 2 are not de leted. They can be recalled at
any time . When the vehicle is
unlocked , the set­
tings assigned to the remote control key a re re­
stored .
If your vehicle is driven by other persons using
your remote control key, you should save your in­ dividual seat position on one of the memory but­
tons . You can recall your settings again simply
and conveniently by p ressing the correspond ing
memory button. When the vehicle is locked,
these settings are automatically re-ass igned to
the remo te contro l key and stored.
A WARNING
- For safety reasons, the seat sett ing can only
be reca lled when the vehicle is stationary­
otherwise yo u ris k having an accident.
- In an emergency the reca ll proced ure can be
cancelled by pressing the
! OF F! switch or by
tapping of the memory buttons.

Warm and cold
Operation
We recommend pressing the IAUTOI button and setting the temperature to 72 °F (22 °C) .
Fig . 96 3-zo ne de luxe automat ic cl imate co ntrol: con tro ls
Press the buttons to turn the functions on or off .
Use the dials to adjust the temperature, the
b lowe r speed and the air distrib ution . The LED in
a bu tton w ill light up when the funct ion is
sw itched on. The sett ings a re displayed for a few
seconds in the radio or MMI* display .
The driver and front passenger side can be ad­
jus ted separate ly. Th e settings are also d isplayed
in the clima te control system d isplay.
I O FF j Switching the climate control system
on /off
The IOFFI button swi tches the climate contro l
sys tem on or off. It also switches on when you
press the knob . Ai rf low from o utside is blocked
when the climate con trol system is switched off.
IAIC ! Switching cooling mode on /off
The air is not cooled and humidity is not removed
when cooling mode is switched off . T h is can
cause fog on the windows . The cooling mode
sw itches off au toma tic ally when there are cold
outside temperat ures.
la, I Switching recirculation mode on /off
In recirculation mode, the a ir inside the vehicle is
circu lated and filtered . This prevents the unfil­
tered a ir o utside the vehicle from e ntering the
veh icle interior . We recommend switching recir-
78
culation mode on when driving through a tunnel
or when sitt ing in traffic
Q &. -
The !AUTO I button or I l1ii> FRONT ! button switches
reci rculation mode off .
I AUTO I Switching automatic mode on
Automatic mode main tains a constan t tempera­
ture inside the vehicle . Air temperature , airflow
and air distribution are controlled automatically.
Adjusting the temp erature
Temperatures between 60 ° F (+ 16 °C) and 84 ° F
( + 28 °C) can be set . O utside of th is range,
l ow or
high will appear in the radio or MMI* display . At
both of these settings, the climate control sys­
tem runs continuously at maximum cooling or
heating power. There is no temperature regula­
tion.
~ Adju sting th e airfl ow
You can adjust the airflow manua lly to suit your
needs . To have the airflow reg ulated automati­
cally, press the
IAUTO I button.
~ Adjusting the air distribution
Yo u can manual ly select the vents where the air
will flow. To have the air distribut ion regulated
automat ica lly, press the
IAUTO I button. ""