
Child safety
-Never let a child stand or kneel on any seat,
for example the front seat.
- Never let a child ride in the cargo area of
your vehicle.
- Always remember that a child leaning for
ward, sitting sideways or out of position in
any way during an accident can be struck by
a deploying airbag. This will result in serious
personal injury or death.
- If you must install a booster seat on the
front passenger seat because of exceptional
circumstances the
PASSENGER AIR BAG
OFF
light must come on and stay on, when
ever the ignition is switched on.
- If the
PASSENGER AIR BAG OFF light does
not come on and stay on, perform the
checks described
Q page 158, Monitoring
the Advanced Airbag System.
- Take the child restraint off the front passen
ger seat and install it properly at one of the
rear seat positions if the
PASSENGER AIR
BAG OFF
light does not stay on whenever
the ignition is switched on.
-Always read and heed all WARNINGS when
ever using a child restrained in a vehicle is
being used
Q page 140, Safety belts,
Q page 148, Airbag system and
Q page 168, Important information.
Securing child seats
Securing a child safety seat using a safety
belt
Safety belts for the rear seats and the front pas
senger can be locked with the convertible locking
retractor to properly secure child safety seats .
The safety belts emergency locking retractors for
the rear seats safety belts and for the front pas
senger's seat safety belt have a convertible lock
ing retractor for child restraints. The safety belt
must be locked so that belt webbing cannot un
reel. The retractor can be activated to lock the
safety belt and prevent the safety belt webbing
from loosening up during normal driving. A child
safety seat can only be properly installed when
the safety belt is locked so that the child and
child safety seat will stay in place .
178
Always remember: Even though your vehicle is
equipped with an Advanced Airbag system, all
children, especially those 12 years and younger,
should always ride in the back seat properly re
strained for their age and size.
A WARNING
Improperly installed child safety seats in
crease the risk of serious personal injury and
death in a collision.
-
- Always make sure that the safety belt re
tractor is locked when installing a child
safety seat. An unlocked safety belt retrac
tor cannot hold the child safety seat in place
during normal driving or in a crash.
- Always buckle the child safety seat firmly in
place even if a child is not sitting in it. A
loose child safety seat can fly around during
a sudden stop or in a collision.
- Always make sure that the rear seat back
rest to which the center rear safety belt is
attached is securely latched whenever the
rear center safety belt is being used to se
cure a child restraint.
- If the backrest is not securely latched, the
child and the child restraint will be thrown
forward together with the backrest and will strike parts of the vehicle interior. The child
can be seriously injured or killed .
- Never install rear-facing child safety seats
or infant carriers on the front passenger
seat . A child will be seriously injured and
can be killed when the passenger airbag in
flates.
- The inflating airbag will hit the child safety
seat or infant carrier with great force and
will smash the child safety seat and child
against the backrest, center armrest, door
or roof.
- Always install rear-facing child safety seats
or infant carriers on the rear seat.
- Forward-facing child safety seats or infant
carriers installed on the front passenger's
seat may interfere with the deployment of
the airbag and cause serious injury to the
child.
- It is safer to install a forward-facing child
safety seat on the rear seat.

CD
CD
.... N ,-... N ..... 0 0 C<'. 00
-Always read and heed all WARNINGS when
ever using a child restrained in a vehicle is
being used
c::;, page 168 . Special precautions
apply when installing a child safety seat on
the front passenger seat
c::;, page 149, Child
restraints on the front seat -some impor
tant things to know.
A WARNING
Always take special precaut ions if you must
install a forward or rearward-fac ing ch ild re
straint on the front passenger's seat in excep
tional situations:
- Whenever a forward or rearward-facing
child restraint is installed on the front pas
senger seat, the
PA SSENG ER AIR BAG OFF
light must come on and stay on whenever
the ignition is switched on .
- If the
PASSENGER AIR BAG OFF light does
not come on and stay on, perform the
checks described
c::;, page 158, Monitoring
the Advanced Airbag System.
-
- Take the child restraint off the front passen
ger seat and install it properly at one of the
rear seat positions if the
P ASS ENGER AIR
BA G O FF
light does not stay on whenever
the ignition is switched on .
- Improper installation of child restraints can
reduce their effect iveness or even prevent
them from providing any protection .
-An improperly installed ch ild restraint can
interfere w ith the airbag as it deploys and
seriously injure or even kill the child .
- Always carefully follow the manufacturer's
instructions provided w ith the child safety
seat or car rier.
- Never place additional items on the seat
that can increase the total weight registered by the weight-sensing mat and can cause in
jury in a crash .
A WARNING
Forward-facing child restraints :
- Always ma ke sure the forward-fac ing seat
has been designed and certified by its man
ufact urer for use on a front seat with a pas
senger front and side airbag .
Child safety
-Never put the forward-facing child restraint
up, against or very near the instrument pan
el.
- Always move the front passenger seat to
the highest position in the up and down ad
justment range and move it back to the rearmost posit ion in the seat's fore and aft
adjustment range, as far away from the air bag as possible, before installing the for
ward-facing ch ild restraint.
- Always make sure that the safety be lt upper
anchorage is behind the ch ild rest raint and
not next to o r in front of the child restraint
so that the safety be lt will be properly posi
tioned.
- Make sure that t he
PASSENGER AIR BAG
OFF
li ght comes on and stays on a ll the time
whenever the ignition is switched on .
A WARNING ~
Rearward-facing child restraints:
- A child in a rearward-fac ing ch ild safety seat
installed on the front passenger seat will be
serious ly injured and can be ki lled if the
front airbag inflates - even with an Ad
vanced Airbag System .
- The inflating airbag will hit the child safety
seat or infant carrier with great force and
will smash the child safety seat and child aga inst the backrest, center armrest, door
or roof .
- Always be especially carefu l if you must in
stall a rearward facing child safety seat on
the front passenger seat in except ional cir
cumstances .
- A t ight tether strap on a rearward-facing
child restraint attached to the front passen
ger seat can put too much p ressure on the
weight -mat in the seat and reg ister a heav i
er weight in the Advanced Airbag System.
The heavier weight reg istered can make the
system work as though an adult were on the
seat and deploy the Advanced Airbag when
it must be suppressed causing serious or
even fata l injury to the child .
179

Child safet y
-Make sure that the PAS SENGER AIR BAG
OFF
light comes on and stays on all the time
whenever the ignition is switched on.
- If the
PASS ENGER AIR BAG O FF light does
not come on and stay on, immediately in
stall the rear-fac ing ch ild safety seat in a
rear seat ing position and have the airbag
system inspected by your Aud i dea le r.
Activating the convertible locking retractor
Use the convertible locking retractor to secure a
child restraint.
Always heed the child safety seat manufacturer's
instructions when installing a child restraint in
your veh icle. To activate the convertible locking
retractor:
.. Place the child restraint on a seat, preferab ly
on the rear seat.
.,. Slow ly pull the belt
all the wa y out .
.,. Route it around o r th rough the ch ild restraint
belt path
¢ _& .
.. Push the child safety seat down with your full
weight to get the safety be lt really tight.
.,. Inse rt the bel t tongue into the buckle fo r that
seating position.
.. Guide the safety belt back into the retractor un
ti l the belt lies flat and snug on the child safety
seat.
.,. You should hear a "clicking" no ise as the belt
winds back into the inertia reel. Test the con
vertible locking retractor by pulli ng on the belt .
You should no longer be able to pull the belt
out of the retractor. The conve rtible locking re
tractor is now act ivated .
.,. Make s ure that the red release b utton is fac ing
away from the child restraint so that it can be
u nbuck led quick ly.
.. Pu ll on the be lt to make sure the safety belt is
properly tight and fastened so that the seat
cannot move forward or sideways more than
one inch (2 .5 cm).
A WARNING
Us ing the wrong child restra int or an improp
erly installed ch ild rest raint can cause ser ious
personal in ju ry o r dea th in a cr ash.
180
- Always make sure that the safety be lt re
tractor is locked when installing a ch ild
safety seat. An unlocked safety be lt retrac
tor cannot hold the chi ld safety sea t in place
during normal driving or in a c rash.
- Always buckle the child safety seat firmly in
place even if a ch ild is not sitt ing in it. A
loose child safety seat can fly a round dur ing
a sudden stop or in a c rash.
- Always make sure the seat back rest to which
the child res traint is installed is in an up
right position and securely latched into
place and canno t fold forw ard . Othe rw ise,
the sea tba ck wit h the child safe ty seat at
tached to it could fly forwa rd in the event o f
an accident o r othe r emergency situation.
- Always read and heed all WARNINGS when
eve r us ing a child restrained in a vehicle is
being used
¢page 168. Special precautions
apply when installing a child safety seat on
the front passenger seat
¢ page 149, Child
restraints on the front seat -some impor
tant things to know .
· Deactivating the convertible locking
retractor
The convertible locking retractor for child re
straints will be deactivated automatically when
the bel t is wound all the way back into the re
tra ctor .
.,. Press the red button on the safety belt buckle.
The belt tongue will pop out of the buc kle.
.,. Guide the safety be lt all the way back into i ts
s towed pos it io n .
A lways let the safe ty be lt retract completely into
i ts stowed pos it io n. T he safety be lt ca n now be
u sed as an ord inary safety bel t w ithout t he con
ver tib le locking ret ractor fo r chil d rest raints .
If the conve rtible locking retractor should be ac
tivated inadverte ntly, the safety belt must be un
fastened and guided comp lete ly back i nto its
stowe d position to deac tiva te th is fe ature. If the
convertible locking retractor is no t deactivated,
the safety be lt will gradually become tighter and
u ncomfortab le to wear.

Child safety
-Never attach two child restraint systems to
one tether strap or tether anchorage.
- Never attach a tether strap to a tie-down
hook in the luggage compartment.
- Never use chil d restraint tether anchorages
to secure safety belts or other kinds of occu
pant restraints.
- Never secure or attach any luggage or other
items to the LATCH lower anchorages or to
the tether anchors.
- If a tether or other strap is used to attach a
child restraint to the front passenger seat,
make sure that it is not so tight, that it
causes the we ight-sens ing mat to measure
more weight than is actually on the seat.
- The heav ier we ight registered can make the
Advanced Airbag System work as though an
adul t were on the seat and deploy the Ad
vanced Airbag when it must be suppressed ca using se rious or even fatal inju ry to the
child.
- If you must install a rearward fac ing ch ild
safety seat on the front passenger seat be
ca use of exceptiona l circumsta nces and the
PAS SENGER AIR BAG OFF light does not
come on and stay on, immediate ly install
the rear-fac ing chi ld safety seat in a rear
seat ing pos ition and have the airbag system
inspected by your Audi dealer.
Installing the upper tether strap on the
anchorage
F ig. 18 2 Tether strap : proper routing and mount ing
184
Fig. 1 83 Tether strap: proper routing and mount ing
Installing the tether st rap
~ Release or deploy the tether strap on the ch ild
restraint accord ing to the ch ild restraint manu
facture r's instructions.
~ Guide the upper tether s trap under the rea r
head rest raint and in to the rear cargo area
~ fig. 183 (raise the head restraint if necessa
ry). For child restraints with V -tet her straps, al
ways make sure that the head restra int guide
rods do not interfere with any pa rt of the top
tether strap.
~ Slide the tether strap hook over the anchor
bracket .
~ Pull on the tether strap hook so that the spring
ca tch of the hook engages.
~ Tighten the tether stra p firm ly following the
child restra int manufacturer's instruc tions .
Attaching to the cente r seating position
~ Slide the rear seat forward ~ page 63 .
~ Pull the anchor bracket forward and con nect
the tethe r strap hook.
~ Tigh ten the te ther strap a nd move the seat
backward.
Releasing the tether strap
~ Loosen the tension following the child restra int
manufac turer's instr uctions .
~ Depress the spr ing catch on the hook and re
lease it from t he a nch o rage.
(D Note
If yo u leave the child restraint w ith the tethe r
strap firmly installed for severa l d ays, this
could leave a mark on the upholstery on the
seat cushion and backrest in the area where
the tether strap was installed. The upholstery
IJ>

CD
CD
.... N ,-... N .... 0 0 C<'. 00
would also be permanently stretched around
the tether strap. This applies especially to
leather seats.
Using tether straps on rearward-facing
child restraints
Currently, few rear-facing child restraint systems
come with a tether . Please read and heed the
child restraint system manufacturer's instruc
tions carefully to determine how to properly in
stall the tether.
A WARNING
A child in a rearward-facing child safety seat
installed on the front passenger seat will be
seriously injured and can be killed if the front
airbag inflates -even with an Advanced Airbag
System.
- The inflating airbag will hit the child safety seat or infant carrier with great force and
will smash the child safety seat and child against the backrest, center armrest, or
door .
-A tight tether or other strap on a rearward
facing child restraint attached to the front
passenger seat can put too much pressure
on the weight-mat in the seat and register a
heavier weight in the Advanced Airbag Sys
tem. The heavier weight registered can make the system work as though an adult
were on the seat and deploy the Advanced
Airbag when it must be suppressed causing serious or even fatal injury to the child.
- If you must install a rearward facing child
safety seat on the front passenger seat be
cause of exceptional circumstances and the
PASSENGER AIR BAG OFF light does not
come on and stay on, immediately install
the rear-facing child safety seat in a rear
seating position and have the airbag system
inspected by your Audi dealer.
Child safety
Additional information
Sources of information about child
restraints and their use
There are a number of sources of additional in
formation about child restraint selection, instal
lation and use:
NHTSA advises that the best child safety seat is
the one that fits your child and fits in your vehi
cle, and that you will use correctly and consis
tently.
Try before you buy!
U.S National Highway Traffic Safety Administra
tion
Tel. : 1-888-327-4236 (TTY: 1-800-424-9153)
http://www.nhtsa.gov
http:/ /www.safercar.gov
National SAFE KIDS Campaign
Tel. : (202) 662-0600
http://www.safekids .org
Safety BeltSafe U.S.A
Tel. : (800) 745-SAFE (English)
Tel. : (800) 747-SANO (Spanish)
http://www.carseat.org
Transport Canada Information Centre
Tel. : 1-800-333-0371 or call 1-613-998-8616 if
you are in the Ottawa area
http://www.tc.gc.ca/ eng/roadsafety/men u. htm
Audi Customer Relations
Tel.: (800) 822-2834
185

CD
CD
.... N ,-... N ..... 0 0 C<'. 00
situations, such as an a irbag dep loyment or hit
ting a road obstacle, data that wi ll assist in un
derstanding how a vehicle 's systems performed.
The EDR is designed to record da ta rela ted to ve
hicle dynamics and safety systems for a short pe
riod of time, typically 30 seconds or less . The
E DR in th is veh icle is des igned to record such da
ta as:
- How various systems in your vehicle were oper
at ing;
- Whether o r not the driver and passenger safety
belts were buckled/fastened;
- How far ( if at all) the dr iver was depressing the
acce lerator and/or brake peda l; and,
- How fast the vehicle was trave ling.
These da ta ca n he lp provide a better understand
ing of the ci rcumstances in which crashes and in
juries occur. NO TE: EDR data are reco rded by your
vehicle only if a non-triv ia l crash situation occurs ;
no data are recorded by the EDR under normal
driving conditions and no personal data (e.g., name, gender, age, and crash location) are re
corded . H owever, other parties, such as law en
forcement, could combine the EDR data w ith the
type of personally identify ing dat a routine ly ac
q uir ed dur ing a crash invest iga tion.
To read data reco rded by an EDR, specia l equip
ment is req uired, a nd access to t he veh icle or the
E DR is needed. I n add it io n t o the veh icle ma nu
facture r, ot he r p arties, s uch as law enfor cement,
that have the specia l equipment, can read the in
formation if they have access to the vehicle or the
EDR.
Some state l aws restrict the retr ieval or down
loading of data stored by EDRs insta lled in a vehi
cle for the express purpose of retrieving data af
ter an accident or crash event without the own
er's consent.
Aud i will not access the EDR and/or s imilar data
or give it to others -
- u nless the veh icle owner (or lessee if t he vehi
cl e h as bee n leased) agrees; or
- u pon the officia l request by the po lice; o r
- upon the order of a court of law or a govern-
ment agency; o r
Intelligent Technology
- for the defense of a lawsuit thro ugh the jud ic ia l
discovery process.
- Aud i may a lso use the data for resea rch about
vehicle operation and safety performance or
provide the data to a third party for research
purposes witho ut identify ing the specif ic veh i
cle or information about the ident ity of its own
er or lessee and only after the recorded veh icle
data has been accessed .
Vehicle control modules
You r vehicle is also eq uipped w ith a number of
electronic control modules for various vehicle
systems, such as engine management, emiss ion
contro l, airbags, and safety be lts .
These elect ronic contro l modu les record data
during norma l vehicle operation that may be
needed by trained techn ic ians for diagnostic and
repa ir purposes . The recording capab ility of these
modules is lim ited to data (no sound is record
ed) . Only a sma ll amount of data is actua lly re
corded over a very lim ited period of time, or stor
ed whe n a system fault is de tected by a contro l
module . Some of the da ta s tored may rela te to
vehicle speed, direction, or braking, as well as re
straint system use and performance in the event
of a crash . Stored data can also only be read and
downloaded wit h specia l equipment that is di
rectly connected to the vehicle.
{!) Tips
Your vehicle may be equipped w ith Aud i con
nect. Your use of certain Aud i connect fea
tures requires wire less serv ices that are pro
v ided by a third party wireless telecommuni
cations provider . Fo r details regarding how in
fo rmation ob tained throug h Au di connec t is
colle cted, p ro cessed, tra nsmitted, used, and
s hare d, ple ase see yo ur contra ct with t he
wireless tele commun ications provider and the
"About A udi connect" tab in your vehicle's
MMI:
I MENU ! button > Audi connect > About
Audi connect .
189

Fuses and bulbs
Left cockpit fuse assignment
Fig. 222 Left side of the cockp it: fuse panel with p lastic
clip
Fuse panel @ (black)
No . Equipment
1 Dynamic steering
2 ESC control module
A/C system pressure sensor, electrome-
3 chanical parking
brake, Homelink, auto-
matic dimming interior rearview mirror,
air quality/outside air sensor, ESC button
s Sound actuator/exhaust sound tuning
6 Headlight range control/corner ing light
7 Headlight (cornering light)
Control modules (electromechanical park-
8 ing brake, shock absorber, quattro Sport,
trailer hitch), DCDC converter
9
Adaptive cruise control or high voltage
battery (hybrid dr ive)
11 Side assist
12 Headlight range control, parking system
13 Airbag
14 Rear wiper
15 Auxiliary
fuse (instrument panel)
16 Auxiliary fuse te rm inal 15 (engine area)
262
Fuse panel ® (brown)
No. Equipment
1 Electric exhaust door
2 Brake
light sensor or brake pedal move-
ment sensor (hybrid drive)
3 Fuel pump
4 Ad
Blue pumps or brake booster power
supply (hybrid dr ive)
s
Left seat heating with/without seat venti-
lation
6 ESC
7 Horn
8
Left front doo r (window regulator, central
locking, mirror, switch, lighting)
9 Wiper motor
10 ESC
11 L
eft rear doo r (window regulator, switch,
li ght ing)
12 Rain and light sensor
Fuse panel
© (red)
No. Equipment
3 Lumbar support
4 Dynamic steering
5 Climatized cup holder
6 Windshie
ld washer system, headlamp
washer system
7 Vehicle electrical system control module 1
8 Vehicle electrical system control module 1
9 Panorama roof
10 Vehicle electrical system control module 1
11 Sun shade (panorama sunroof)
12 Anti-theft alarm system

Consumer inf orm ation
@ For the sake of the env ironment
- Changing the engine settings wi ll adversely
affect emission levels. Th is is detrimental to
the environment and increases fuel con
sumption.
- A lways observe environmental regu lations
when disposing of old engine o il, used brake
fl ui d, d irty engine coolant, spent batteries
or worn out tires.
- Undeployed airbag modules and pretension
ers mig ht be classified as Perchlorate Mate
rial -special handl ing may apply, see
www.dtsc .ca.gov/hazardouswaste/perchlo
r ate. When the vehicle or parts of the re
straint system including airbag modu les
safety be lts wi th pretensioners are scrap
ped, all applicab le laws and regulations
must be observed. Your authorized Audi
dealer is familiar with these requirements
and we recommend that you have your deal er perform this service for you.
Accessories and technical changes
Additional accessories and parts replacement
Always consult an authorized Audi dealer before
purchasing accessories.
Your vehicle incorporates the latest safety design
features ensuring a high standard of active and passive safety.
This safety could be comp romised by non-ap
proved changes to the vehicle . For this reason, if
parts have to be replaced, please observe the fo l
lowing points when insta lling addit ional accesso
ries:
Approved Audi accessories and genuine Audi parts are available from author ized Audi dealers.
These dealers also have the necessary facilities,
too ls and trained specialists to install the parts
and accessories properly.
278
A WARNING
-
Using the wrong spare parts or using non-ap-
proved accessories can cause damage to the
vehicle and serious personal injury.
- Use only accessories expressly approved by
Aud i and genuine Audi spare parts
- These parts and accessor ies have been spe
cially designed to be used on your vehicle.
- Never install accessor ies such as telephone
cradles or beverage holders on airbag covers
or w ith in the airbag deployment zones. Do
ing so will increase the risk of injury if a ir
bags are triggered in an accident!
- Before you check anything in the eng ine
compartment, always read and heed all
WARN INGS
Qpage 217.
(D Note
-If items other than genu ine Audi spare
parts, add-on equipment and accessory
items are used or if repair wor k is not per
formed a ccording to specified methods, this
c an resul t in severe damage to you r vehi
cle's eng ine and body (such as corrosion)
and adve rsely af fect your vehicle's war ranty.
- I f emergency repai rs must be performed
elsewhere, have the vehicle exam ined by an
authorized A udi dealer as soon as possib le .
- T he manuf acture r ca nnot be held liable for
damage which occurs d ue to failure to com
ply with these stipulations.
Technical Modifications '
Our guidelines must be complied with when tech
nical modifications are made .
Always consult an a uthorized Audi de aler bef ore
sta rt ing work on any modifica tions.
This will help ensure that vehicle fu nction, per
fo rmance and safety are not impaired
Q ,& .
Attempting to work on electronic components
and the software used with them can cause mal
funct io ns. Because of the way elect ronic compo
nen ts a re interconnected with each othe r, such
malfunc tions c an also have an adverse affect on
othe r systems that are not d irectl y involved. This ..,.