2017 AUDI A8 stop start

C) C0 ....
"' " "' .... 0 0 :r Setting the home address as the
destination
App lies to: ve hicles with naviga tion sys tem
Start route guidance to the home address you
set simply and quickly .
Requirement : a home address must be stored
r=;, page 172.
"'Selec t: I NAVI button> Route guidance control
button >
Home address .
"'Sta rt route guidance .
Transferring a destination from the
directory
A ppl ies to: ve hicles with naviga tion system
You can navigate directly to destinations in the
directory.
Requirement: the directory must contain con­
tacts w it h priva te/bus iness addresses stored as
desti nations.
"' Se lect :
I NAVI button> Route guidance control
button >
Dire ctory .
"'Select and confirm a contact . If a contact con­
ta ins two navigation destinations (private and
business), se lect and confirm one destination .
Sta rt route guidance.
Entering a destination using geo
coordinates
A ppl ies to: ve hicles with navigation system
"' Select : I NAVI button > Route guid ance control
button >
Address > Coordinates .
"'Select and confirm the Latitude and Longitude .
Start route guidance.
Navigat ion
Entering a stopover/route plan
A pp lies to : vehicles wit h navigat ion syste m
You can enter up to nine stopovers directly in the
route plan or using the destination input op­ tions .
Route
NV -593 W/E ~:~::~~ 'NA AVE ,,: ol
LAS VEGAS . NV
-- B,...._
~: EXCALIBUR. LAS VEGAS. N DI :
2 mi .. 7 : 10 ,~ _ _ _ _:::'.J
LUXOR RESORT AND CASINO
4 mi .. 7:15 -
...
Dcst1nat 1on
T MC
Fi g. 184 Route p la n
0- ::
•
Settings
'*' ,.dl
Requireme nt: a dest ina tion m ust be en tered
¢page 165.
"'Select: !NAV ! button > Route control button .
-Entering a destination as a stopove r: select
and confirm the symbol for entering a stopover
@ ¢ fig . 184 . Enter a dest inat ion r=;, page 165 .
Select and confirm Add to route plan . Start
route guida nce.
- Changing the route plan : press the Route con­
trol b utton . Se lect and confirm the destination
or s topove r and t hen
Change , Move , Delete or
Drive to this de stination now .
- Save route plan :
press the Route cont rol but ­
t on. Selec t and confi rm
Route memory and
t hen
Save route plan . Enter a name.
- Load route plan /Deleting : press the Route con­
t rol b utton . Se lect and con firm
Route memory
a nd then Load route plan /Delete route plan .
The following information appea rs in the rout e
plan s ide menu ¢
fig. 184:
(D Vehicle location
@ Symbol fo r ente ring a stopove r
@ Entered stopove r
@ Destinat io n
To delete all st opovers from your route plan , en­
te r th e i ndividual dest ination and start the route
guidance
r=;, page 165 .
169

Navigation
Starting/canceling route
guidance
App lies to: ve hicles w ith navigat ion system
You can a lso cancel route guidance by enter ing a
new dest ination
c> page 165 .
-Start ing route guidance when entering a new
destination :
select the I NAVI button > Route
guidance
control button > Enter a destination
> Start route guidan ce .
- Resta rti ng/canceling last route guidance :
se­
lect the
I NAVI button> Route guidance control
button >
Start/Cance l.
The follow ing additional funct ions are ava ilable
when enter ing a new destination:
Alternative route s: three route suggest ions are
calculated for the destination that is cu rrent ly
entered. The side menu shows information about
the alternative routes, such as distance to the
destination and the ca lculated arrival t ime.
Alternative ro utes can only be calc ulated for indi­
vidual destinations .
Set point of intere st in cit y: allows yo u to search
for attractions and public p laces around the
specified location, such as hospita ls, movie thea­
ters, recreation areas, etc. The points of interest
can be selected d irectly as a destinat ion.
Set district : the navigation system calculates the
route to the center of the city or district that is
entered.
Display destination on map : the destinat io n en­
tered is disp layed on the map.
1l Only app lies to vehicles w itho ut camera -based speed limit
dis play .
170
Operating the map
Appl ies to: ve hicles with navigation system
Fig. 185 Online map wit h cross hairs sw itc hed off
F ig . 18 6 Standard map wit h the c ross hair s sw itched o n
-Ope ning the map : press the INAVI button (sev­
eral times if necessary) .
-Switching the crosshairs on : press the control
knob in the map v iew.
- Switching the cro sshair s off: press the I BACKI
button .
When the crosshairs are switched off:
(D Dir ec tion: the map is disp layed e ithe r with an
orientation to t he
North or to the Driving di­
re ction
<=> page 17 3 .
@ Scale: turn the control knob to the left or
right to decrease or inc rease the scale .
@ Dista nce to the des tination o r stopover
@ Calc ulated arriva l time at the destination or
stopover
® Speed display1 )
® Altitude disp lay
0 Vehicle location

0 co .... N ,..... N .... 0 0 :c ' Clearing the Jukebox
Requirement: the Jukebox must contain audio/
video fi les.
- Selecting fil es/fo ld ers : se lect the Settings con­
t rol button
> De lete jukebo x > individual files
or folders.
Press the All control button to select
all fi les or folders.
Or : select and confirm a
fo lder and press and hold the control knob . A ll
files in the folder are se lected for de leting .
-Deleting files and folder s: select the Start de­
leting
control button > Y es. T he status of the
deleting process is shown in the Infotainment
display. Jukebox playback stops dur ing the de­
let ing process and starts again automatically
once the deletion is complete .
Showing m emory cap acity
Select: Setting s control b utton > Jukebo x memo­
r y.
The used/free Jukebox memory as well as the
number of stored tracks appear in the Infotain­
ment d isplay.
The Jukebox is started and operated through the MMI
¢ page 189.
@ Note
Do not import audio/video files when the en­
gine is t urned off because this will drain the
veh icle battery.
@ Tips
- Tracks from audio CDs cannot be imported
to the Jukebox for legal reasons.
- Files already imported are recognized and will be grayed out when setting up a new i mport.
- It is not possible to play audio/v ideo files in
t h e DVD dr ive while importing them.
- The Jukebox does not provide an export
function due to lega l reasons .
- Files or tracks without stored information
are listed as
Unkno wn. Audi recommends
adding addit iona l information (s uch as 103
tags) to aud io files.
- Reset the Jukebox to the facto ry defau lt set­
tings when selling your vehicle¢
page 206.
Media dr ives and conn ections
Bluetooth audio player
App lies to : vehicles wi th Blue toot h int erface
You can play music wirelessly from your cell
phone through the MMI using the Bluetooth au­
dio player.
Requirement: the vehicle must be stationary. The
B luetooth function on the portab le aud io player
and the MMI
Aud io pla yer must be switched on
¢ page 155.
.,. Select the I MEDIAi button > Source control but­
ton
> Bluetooth audio player> Find new Blue­
tooth audio player .
The available Bluetooth au­
dio players are d isplayed .
.,. Select and confirm the des ired Bluetooth audio
player from the l ist .
.,. Select and confirm
Audio player . The MMI gen­
erates a PIN for the con nection.
.,. Sele ct and confirm
Yes .
.,. Enter the PIN for connecting on your cell
phone .
Or: if the PIN is a lready displayed on
your cell phone, confirm it in the ce ll phone and
in the MMI. The t ime allowed for enter ing the
PIN is limited to approximate ly 30 seconds.
The media are started and operated through the
portable device o r the MMI, depending on the de­
vice being used
¢ page 189.
@ Tips
-Be sure to pay attention to any possible con ­
nection prompts on your Bluetooth audio
player.
- You only have to pai r your device one time .
Bl uetooth devices that are already paired
are automatically connected to the MMI as
soo n as they are in range.
- Severa l Bluetooth audio players can be con­
nected to the MMI, but only one portab le
device can be active.
- Bluetooth A2DP and AVRCP (1.0/1.3) are
supported.
- The supported media fu nctions depend on
the Bluetooth aud io player being used.
- For more informat ion on the suppo rted de­
vices, v is it
www .audi.com /bluetooth or
contact your authorized Aud i dea ler or a u­
thorized Aud i Serv ice Fac ility.
183

C)
Playing media
Accessing media
You can start and operat e various media drives
through the fv1fv1I control panel.
Fig. 198 Possible audio/v ideo sources
Fig. 199 Possible audio/v ideo sources
Requirement: a media drive must contain audio/
video files.
~ Select : I MEDIAi button .
The source overview or the last file that was play­
ing is displayed after selecting Media.
-Selecting a source: press the Source control
button . Select and confirm a source from the
list .
-Playing audio/video files : select and confirm a
folder, song or chapter. The content of the
folder is displayed or a track or chapter is
played .
-Moving one level up in the folder structure :
press the I BACK I button. Or: select and confirm
Folder up.
~ -Moving to the highest level in the folder struc-
~ ture: press the I MEDIAi button .
...... 0
~ Possible sources are:
Playing media
(D Jukebox ¢page 182
@ SD card reader ¢page 181
@ DVD drive c!:>page 181
© DVD changer* c!:>page 182
® Audi music interface* (for example, an iPod,
USB or an external audio/video input*)
c!:> page 185
® Bluetooth audio player* c!:> page 183
(!) Wi-Fi audio player* ¢ page 184
(!) Tips
-For safety reasons, the video image is only
displayed when the vehicle is stationary. On­
ly the sound from the video plays while driv­
ing.
- Video playback through an iPod/iPhone
does not continue after stopping and start­
ing the vehicle .
- You can scroll through long lists of folders
or tracks quickly by turning the control knob
quickly . The scrolling speed depends on the
number of folders or tracks.
- When synchronizing a portable device with
"Cloud" services, playlists may display incor­
rectly in the MMI. Use the media center in
the device.
- Some DVDs do not allow selections to be
made during playback, for example select­
ing an audio track, subtitles or a track or
chapter.
189

Rear Seat Entertainment
Labeling the wireless headphones
-Attach the supplied label CD or@ c::> fig. 209 on
the inside of the left/right wire less head­
phones.
La beling the w ireless headphones:
CD Wireless headphones label (paired with the
left RSE display)
@ Wireless headphones label (paired with the
right RSE display)
Switching wireless headphones on/off
- Switching on:
to switch the wire less head­
phones on, press the On/Off button CD
9 fig. 208 on the right earpiece (R) for approxi­
mately
3 seconds and release it once the LED
@ starts blinking . The light @will blink s lowly
once the connection to the wireless head­ phones has been established.
- Switching off : to switch the wireless head­
phones off, press and hold the On/Off button CD until the LED @turns off.
The wireless headphones switch off automatical­ ly about five minutes after the RSE switches off.
Disconnect wireless headphones
You can delete the pairing between the wireless
headphones and the RSE if yo u need to switch
out the headphones o r change the pairing .
- Select:
I M ENU I button> Setup RSE control but­
ton
> Headphones > Delete wireless head ­
phones.
A WARNING
- For safety reasons, as the driver, only use
the headphones when the vehicle is station­
ary to reduce the r isk of a crash .
- When driving, store the headphones secure­
ly so that they do not move around in the
vehicle interior when braking or in a crash.
- Maintain a moderate volume leve l when lis­
tening to audio playback through the head­
phones. Continuous exposure to extreme
volume levels may result in loss of hearing.
198
-
@ Tips
-If the wire less headphones were already
paired, the connection to the headphones
will be reestablished after switching the
RSE on if the headphones are sw itched on.
- The RSE only supports wireless headphones
from your authorized Audi dealer.
- Audio/video output through the wire less
headphones stops during the pairing proc­
ess.
- The pairing process must be done separate­
ly for the left and right w ireless head­
phones. The wireless headphones are as­
signed to the left or right RSE display de­
pend ing on the side of the RSE control unit
where you started the pairing process. The
pairing between the wireless headphones
and the lef t/r ight RSE display is ide ntifi ed
with a label.
- Volume that is too high or too low is auto­
matically adjusted to a preset leve l when
the wireless headphones are connected.
Charging and changing the battery
Applies to: vehicles with Rear Seat Entertainment
If the light on the wireless headphones turns
red the batteries are low and need to be charg-
,
ed or replaced .
Fig. 210 Connec tion for the charg ing cable/battery com­
partm ent
-Charging the battery : connect the charging ca­
ble to the connection
CD c::> fig . 210 on the bot­
tom side of the left earpiece (L) . Then connect
the charging cable to the cigarette lighter * /12
Volt socket* in the rear center console.
Or:
charge the battery for the wireless headphones .,.

0 co .... N ,..... N .... 0 0 :c ' ® Searching for a destination online l)
The route is calculated based on various route cri­
teria. To set the criteria, you must first plan a
destination and then display the route in the RSE
display using the
Display route function. When
you transfer a planned destination to the MMI
using the
Send destination to the driver func ­
tion, the cr iteria are transferred automat ically.
A planned destination is shown in the RSE display
in white and active route guidance is marked in
blue.
Displaying a route
The planned destination and the distance to the
destination/arrival time are displayed on the
map. The route is calculated based on the current
vehicle location and can be updated.
To display active route guidance on the map, se­
lect the
Destination control button > Exit route
display.
Send destination to the driver
To start route guidance for a planned route, the
destination must be transferred to the MMI. If
the
Destinations are set to Confirm in the Setup
MMI menu q page 196, the destination must be
confirmed before transferring to the MMI.
(i) Tips
-The display of navigation functions is
synchronized to both RSE displays.
- Refer to the notes in the chapter
About
Audi connect
q page 162.
- The content, scope and providers of offered
Audi connect services may vary.
- The navigation functions match those in the
MMI to a large extent. For more informa­
tion, refer to
q page 165.
- The functions for the online Street View
9page 159 can also be used in the RSE
while driving.
- If
On request is selected for the data con­
nection in the
Data connection menu
qpage 161, receiving data packets, such as
l) Applies to veh icles w ith A udi connect
Rear Seat Entertainment
weather information, must be confirmed in
the MMI.
Accessing traffic information
Applies to: vehicles with Rear Seat Entertainment and naviga·
tion system
.. Select: the I MENU I button > Info.
- Opening a detailed view of traffic information :
select and confirm the traffic information from
the list.
-Opening the next traffic report: select and
confirm
Show next report .
(D Tips
For more information on accessing traffic in·
formation, refer to
9 page 175.
Accessing Audi connect services
Applies to: vehicles with Rear Seat Entertainment, navigation
system and Audi connect
Requirement: the requirements for Audi connect
services must be met
9page 157.
.. Select: the I MENU I button > Audi connect > the
desired Audi connect service .
-For example, display weather information : se­
lect and confirm
Weather. Se lect and confirm
the desired search area:
In immediate vicinity/
In vicinity of destination or stopover or In new
city .
Enter a location and confirm the input
with
OK.
(D Tips
- Refer to the notes in the chapter About
Audi connect
q page 162.
- Additional information about accessing Audi
connect services can be found under
9page 157.
Entertainment systems
Listening to the radio
Applies to: vehicles with Rear Seat Enterta inment
.. Select: the I RADIO I button.
201

0 co .... N ,..... N .... 0 0 :c ' Catalytic converter
Applies to: ve hicles with gasoline engine
It is very important that your emission control
system (catalytic converter) is functioning prop­
erly to ensure that your vehicle is running in an
environmentally sound manner .
... Always use lead-free gasoline c:> page 267, Fuel
supply.
... Never run the tank down all the way to empty.
... Never put too much motor oil in your engine
c:> page 2 76, Adding engine oil 'l:::r. .
.,. Never t ry to push- or tow-start your vehicle.
The catalytic converter is an efficient "clean-up"
device built into the exhaust system of the vehi­
cle . The catalytic conve rter burns many of the
pollutants in the exhaust gas before they are re­
l eased into the atmosphe re.
The exclusive use of unleaded fue l is critically im­
portant for the life of the catalyt ic converter and
proper functioning of the engine.
.&, WARNING
T he temperature of the exha ust system is
high, both when driving and afte r stopping
the engine .
-
-Never to uch the exha ust tail pipes once they
have become hot . This could result in bu rns.
- Do not park o r operate the vehicle in areas
where the hot exhaust system may come in
contact with dry grass, br ush, fuel spill or
other material which can cause a fire .
- Do not apply additional undercoating or rustproofing on or near the exhaust mani­
fold, exhaust pipes, catalytic converter or
heat shields. During dr iving, the substance
used for undercoating could overheat and
cause a fire .
(D Note
-Be aware that just one tank filling with
leaded fuel will already ser iously degrade
the performance of the catalytic converter.
- Do not exceed the correct eng ine o il level
c:> page 2 76.
- Do not drive until the fuel tank becomes
complete ly empty. The engine co uld mis-
Ch eck ing and Filling
fire. Unburned fue l co uld also get into the
exhaust system and this could cause the
catalytic converter to overheat.
- Do not switch off the ignition whi le the vehi­
cle is moving .
- Do not continue to ope rate your vehicle un­
der these conditions, as otherwise fuel can
reach the catalytic converter . This could re­
sult in overheat ing of the converter, requir­
ing its replacement .
- To assure efficient operat ion of the Emis­
sion Contro l System :
- Have yo ur vehicle maintained p roperly and
in accordance with the serv ice recommen­
dat ions in yo ur War ranty
& Ma intenance
booklet .
- L ack of proper ma intenance as well as im­
proper use of the veh icle w ill impa ir the
function o f the emission control system
and could lead to damage.
@ For the sake of the environment
Even when the Emiss ion Control System is op­
erating properly, the exhaus t gas can have a
su lfur-like exhaust gas sme ll under some op­
erating states. This depends on the sulfur
content of the fuel being used. Us ing a differ­
ent brand of fuel may help, or fil ling the tank
with lead-free super grade gasoline.
Engine compartment
Working in the engine compartment
Special care is required if you are working in the
engine compartment
For work in the engine compartment such as
chec king and filling fluids , there is a risk of in ­
jury , scalding, ac cident s, and burn s. For thi s
reason , follow all the warnings and general
safety p recauti ons provi ded in the following in­
formation. The engine compartment is a dan­
gerous area on the vehicle.
c:> .&. .
.&, WARNING ~
-Turn the engine off .
- Switch the ignition off .
271

C) C0 ....
"' " "' .... 0 0 :r _& WARNING
Temperature grades apply to tires that are properly inflated and not over or underinflat­
ed .
Tire Pressure Monitoring
System (AS, S8)
(D General notes
A ppl ies to: AS, 58
Each t ire, including the spare (if provided),
should be checked monthly when cold and inflat­
ed to the inflation pressure recommended by the
veh icle manufact urer on the vehicle placard or
tire inflation pressure label. (If your vehicle has
tires of a different size than the size indicated on
the vehicle placard or tire inflation pressure la­
be l, you should determine the proper tire infla­
tion pressure for those tires).
As an added safety feature, your veh icle has been
equipped with a tire pressure monitoring system
(TPMS) that illuminates a low tire pressure te ll­
tale when one or more of your tires is significant­
ly under-inflated . Accordingly, when the low tire
pressure telltale illuminates, you should stop and
check your tires as soon as possible, and inflate
them to the proper pressure . Driving on a signifi ­
cantly under-inflated tire causes the tire to over­
heat and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread life,
and may affect the vehicle's handling and stop­
ping ability .
Please note that the TPMS is not a substitute for
p roper tire maintenance, and it is the driver's re­
sponsib ility to ma intain correc t tire p ressure,
even if under-inflation has not reached the level
to trigger illumination of the TPMS low tire pres­
sure telltale.
Your veh icle has also bee n eq uipp ed w ith a TPM S
mal function indicator to indicate when the sys­
tem is not operat ing properly. The TPMS mal­
function indicator is combined with the low tire
pressure telltale. When the system detects a
malfunction, the telltale will flash for approxi­
mately one mi nute and then remain cont inuously
illuminated . This sequence will continue upon
Wheels
subsequent vehicle start-ups as long as the mal ­
function exists .
When the malfunction indicator is illuminated ,
the sys tem may not be able to detect or signal
low tire pressure as intended . TPMS malfunctions
may occur for a variety of reasons, including the
i nsta llation of replacement or alternate tires or
whee ls on the vehicle that prevent the TPMS
from functioning properly. Always check the
TPMS malfunction telltale after replac ing one or
more tires or wheels on your vehicle to ensure
that the replacement or a lternate tires and
whee ls allow the TPMS to continue to function
properly.
If the Tire Pressure Monitoring System
indicator appears
Applies to: A8, 58
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too low
or if there is a system malfunction.
Fig. 269 I n strument cluste r: indicator light with messa ge
Using the ABS sensors, the tire pressure monitor­
ing system compares the tire tread c ircumfer­
ence and vibration characteristics of the individu­
al tires.
If the press ure changes in one or more
tires, this is indicated in the instrument cluster
display with an indicator light
[I] and a message.
If only one tire is affected, the location of that
tire will be indicated.
T he tire press ures must be stored in the Infotain­
ment system again each time the pressures
change (switching between partial and full load
pressure) or after changing or replacing a tire on
your vehicle
c:> page 302. The tire pressure moni­
toring system only monitors the tire pressure you have stored . Refer to the t ire pressure label for ..,.
301