2016 TOYOTA AURIS HYBRID Owners Manual

1052. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
2
Instrument cluster
NOTICE
■To prevent damage to the engine and its components
If the high engine coolant temperature warning light is shown, the engine
may be overheating. In this case, immediately stop the vehicle in a safe
place, and check the hybrid system after it has cooled completely.
(→ P. 544)

1062. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
The multi-information display presents the driver with a variety of driv-
ing-related data, such as the current outside temperature. The multi-
information display can also be used to change the display settings
and other settings.
●Outside temperature ( →P. 103)
● Pop-up display
In some situations a warning
message or the operation sta-
tus of a system will be tempo-
rarily displayed on the multi-
information display.
On some models: Some pop-up
displays can be set on/off.
(→ P. 1 1 2 )
● Trip information ( →P. 108)
Displays the following items: •Odometer
•Trip meter
Multi-information display
Display content

1072. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
2
Instrument cluster
●Menu icons ( →P. 109)
Select a menu icon to display its content.
To display the menu icons, press the or switch on the
steering wheel.
Drive information ( →P. 1 1 0 )
Select to display various drive data.
Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information.
• Route guidance
• Compass display (north-up display/heading-up display)
Audio system-linked display (if equipped)
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Driving assist system information (if equipped)
Select to display the operational status of the following systems
• LDA (Lane Departure Alert) ( →P. 264)
• RSA (Road Sign Assist) ( →P. 273)
Warning message display ( →P. 498)
Select to display warning messages and measures to be taken if a
malfunction is detected.
Settings display ( →P. 1 1 2 )
Select to change the meter display settings and other settings.

1082. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
◆Changing the display
To change the displayed item,
press the “TRIP” switch.
Each time the switch is pressed,
the displayed item will be
changed.
◆Display items
■Odometer
Displays the total distance the vehicle has been driven.
■Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
To reset, display the desired trip meter and press and hold the “TRIP”
switch.
Trip information

1092. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
2
Instrument cluster
◆Operating the meter control switches
The multi-information display is operated using the meter control
switches.: Display the menuicons/select menu
icons
: Change displayed item, scroll up/down
the screen and
move the cursor up/
down
Press: Enter/Set
Press and hold: Reset
Return to the previous screen
Menu icons
1
2
3

1102. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
◆Drive information
■Drive information 1/Drive information 2/Drive information 3
Displays drive information such as the following:
●Drive information 1
• Current fuel consumption (gauge display)
• Average fuel economy (after reset)
● Drive information 2
• Distance (driving range)
• Average vehicle speed (after reset)
● Drive information 3
• Average fuel economy (after start)
• Distance (after start)
Displayed items (listed below) can be changed on the settings dis-
play. ( →P. 112)
ItemContent
Current fuel con-
sumption
(gauge display) Displays the current rate of fuel consump-
tion on a gauge display
Current fuel con-
sumption
(numeric display)Displays the current rate of fuel consump-
tion as a number
Average fuel
economy
(after reset)Displays average fuel consumption since
display reset
*1, 2
Average fuel
economy
(after start)Displays average fuel consumption since
hybrid system start
*2
Average fuel
economy
(after refuel)Displays average fuel consumption since
refuel
*2, 3
Average vehicle
speed (after reset)Displays average vehicle speed since dis-
play reset
*1
Average vehicle
speed (after start)Displays average vehicle speed since
hybrid system start
Elapsed time
(after reset)Displays elapsed time since display reset*1

1112. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
2
Instrument cluster*1: Values that can be reset will be displayed with a circle () in the upper
right corner.
To reset, display the desired item and press and hold switch. If both
displayed items are resettable, a reset selection screen will appear.
*2: Use the displayed fuel consumption as a reference.
*3: When only a small amount of fuel is added to the tank, the display may not
be updated.
When refueling, turn the power switch off. If the vehicle is refueled without
turning the power switch off, the display may not be updated.
*4: This distance is computed based on your average fuel consumption. As aresult, the actual distance that can be driven may differ from that dis-
played.
■
Energy monitor
→ P. 1 1 5
■Digital speedometer
Displays vehicle speed as a number.
Elapsed time
(after start)Displays elapsed time since hybrid system
start
Distance
(driving range)Displays driving range with remaining
fuel
*3, 4
Distance
(after start)Displays drive distance since vehicle start
BlankNo item
ItemContent

1122. Instrument cluster
UK AURIS_HV_HB_EE (OM12K47E)
◆Settings display
■ LDA (Lane Departure Alert) warning sensitivity (if
equipped)
LDA warning sensitivity can be set to 2 different levels.
■ Toyota parking assist-sensor (if equipped)
Select to activate/deactivate the Toyota parking assist-sensor sys-
tem.
■ RSA (Road Sign Assist) (if equipped)
Select to activate/deactivate the RSA system.
■ Meter light control
Select to adjust the brightness of the meters when in night mode
*.
*: Night mode: →P. 1 1 3
■
Other settings
Select to change the following settings:
● RSA (Road Sign Assist) setting (if equipped)
• Notification method (excess speed/other warnings) Select to change the notification method of the following warn-
ings to no notification/display only/display and buzzer.
Excess speed warning:
Warns the driver if the vehicle exceeds the speed displayed on
the speed limit sign on the multi-information display.
Other warnings:
Warns the driver if the system determines that the vehicle is
overtaking when a no overtaking sign is displayed on the multi-
information display.
• Excess speed notification level Select to set the speed threshold over which the excess speed
warning starts to operate when a speed limit sign is displayed
on the multi-information display.
● Units
Select to change the units of measure displayed on the multi-
information display.
● EV indicator
Select to set the EV indicator on/off.