2016 SUBARU FORESTER Navigation Manual

SETUP
135
PHONE
4
No. Function
Select to set automatic message readout on/off.
6HOHFWWRVHWWKH606006QRWL

SETUP
136
No. Function
Select to change the incoming call display.
Full Screen (Full Screen): When a call is received,
the hands-free screen is displayed and can be operated
on the screen.
Drop-Down (Drop-Down): A message is displayed
on the upper side of the screen.
Select to set display of the contact/history transfer
completion message on/off.
Select to reset all setup items.

137
APPS
5
5

STARLINK
138
STARLINK
STARLINK
The STARLINK function allows the system to link with a
smartphone using Bluetooth.
When connecting iPhone or Android devices with the
STARLINK application installed, you can control STARLINK
content through the system.
In order to connect to this system, use Bluetooth.
DISPLAYING STARLINK INFORMATION
1.Run the STARLINK application on your smartphone.
2.Connect your smartphone by utilizing the Bluetooth
connection.

”For details about registering or connecting your
VPDUWSKRQH
:3
3.SelectSTARLINK (STARLINK) on the “APPS (APPS)”
screen.
4.Check that the “STARLINK disclaimer (STARLINK
disclaimer)” screen is displayed.
NOTE
OWhen using the STARLINK function, a disclaimer screen will be
displayed. Be sure to fully read the contents before using the
function.
OThere may be times when
STARLINK (STARLINK) does not
appear immediately when the ignition switch is set in the “ACC”
or “ON” position. If so, please wait.
ABOUT THE SUPPORTED DEVICES
This system supports the following devices.

”iPhone: iOS 4.3.5 or later

”Android: Android 4.0 or later

MirrorLink™
139
APPS
5
MirrorLink™
MirrorLink™
The MirrorLinkTM function allows smartphone content to be
operated via the system.
Android devices must use USB.
Depending on differences between models or software
version etc., some models might be incompatible with this
system.
This function is not available if the smartphone is
not compliant with MirrorLink™ of Car Connectivity
Consortium™.
OVERVIEW
The MirrorLink™ operation screen can be reached by the
following methods:

MirrorLink™
140 XControl screen


*: The displayed screen will differ depending on the connected smartphone.
No. Function
Select to choose a MirrorLink™ device.
6HOHFWWRFKDQJHWKHVFUHHQVL]H
:3
Select to return the application list screen.
Displays software buttons that function as the buttons
on the smartphone.
Select to change the other audio source (Radio, Disc
etc.).
WARNING
ODo not operate the player’s controls or connect the
smartphone while driving.
CAUTION
ODo not leave your smartphone in the car. In particular, high
temperatures inside the vehicle may damage the smartphone.
NOTE
O)ROORZ WKH VSHFL

MirrorLink™
141
APPS
5
ABOUT THE SUPPORTED DEVICES
This system supports the following devices.
Device Application
Nokia 700 Carmode
Nokia 701 Carmode
Nokia 808 PureView Carmode
Nokia N9 Carmode
Nokia X7 Carmode
Galaxy S III DriveLink
*DOD[\6,,,
.DriveLink
Galaxy S4 DriveLink

ahaTM by HARMAN
142
ahaTM by HARMAN
ahaTM by HARMAN
aha is a cloud-based application that connects to the system
and gives you access to your favorite web content safely
and easily. There are over 40,000 stations spanning internet
radio, personalized music, audiobooks, Facebook, Twitter,
restaurant and hotel searches, weather and more. For more
about aha, go to the aha site (http://www.aharadio.com).
When connecting iPhone or Android devices with the aha
application installed, you can control, view, and hear aha
content through the system.
In order to connect to this system, use a USB port for
an iPhone and use Android devices via Bluetooth.
With navigation function: You may be also display POI
information from the aha application on the map screen and
route to these POIs.
In this chapter, iPhone or Android devices will be referred to
as a smartphone.
OVERVIEW
XControl panel
No. Function
Turn to adjust volume.
Press to turn the audio system on/off.
Turn to display the next/previous content item.
Press to select an audio mode.
Select to display the next/previous content item.
Select to display the “APPS (APPS)” screen.