Adaptive Cruise Control
29
(2) Press the SET/- switch to set the Adaptive Cruise Control.
The Adaptive Cruise Control starts to control the vehicle speed.
The set vehicle speed and the SET indicator
is displayed on the meter display. Also, The
set vehicle speed indicator ( mark) will be
displayed.
If no vehicle in front has been detected, the
vehicle drives at the constant speed.
NOTE
When the main cruise control is
turned on by pressing the
(CRUISE) switch, the multi
function display switches to the
EyeSight screen.
To return to the triple meter
clock display, pull the
switch on the steering wheel
toward you.
S00887
S00818
S00888
MPH
miles
S00889
SET vehicle speed indicator
Conventional Cruise Control
67
Conventional Cruise Control can be set when the following conditions are met.
- The select lever is in the position.
- The brake pedal is released.
- The vehicle speed is between approximately 25 MPH (40 km/h) and 90 MPH (145
km/h).
■When setting Conventional Cruise Control
(1) Setting the Conventional Cruise Control to standby status.
Press the (CRUISE) switch. At this time, (Adaptive Cruise Control) and the
(following distance setting) are displayed on the EyeSight display in the meter display. The
trip meter changes to the set vehicle speed display, and it will read “- - - MPH (USA) or km/h
(Canada)”. When the (CRUISE) switch is pressed, the initial cruise control mode is
always Adaptive Cruise Control.
If the switch is pressed once more, the EyeSight display will turn off. It will also automatically
turn off when the engine is stopped.
How to use the Conventional Cruise Control
NOTE
When the main cruise control is
turned on by pressing the
(CRUISE) switch, the multi
function display will switch to
the EyeSight screen.
To return to the triple meter or
clock display, pull the
switch on the steering wheel
toward you.
D
S00815S00886
READY display EyeSight
display
MPH
miles
S00887
