76
EyeSight malfunction and temporary stop
If a malfunction is detected in the EyeSight system, the indicators in the meter display and
the multi function display inform the driver of the malfunction. Check the displayed contents
and take the appropriate action.
■Malfunction (including position/angle misalignment of stereo cameras)
The buzzer sounds 1 short beep and the
EyeSight warning light flashes or
illuminates. At the same time, the Pre-
Collision Braking System OFF indicator light
and the Lane Departure Warning OFF
indicator light will illuminate. A message will
also be displayed on the multi function
display.
Display Cause Action
An EyeSight malfunction or
position/angle misalignment
of stereo cameras has
occurred.Inspection and adjustment is
necessary.
Contact your SUBARU
dealer.
CAUTION
In the following conditions, the EyeSight warning light will illuminate. While
the warning light is illuminated, the EyeSight system cannot be used.
xThe stereo cameras are malfunctioning. Contact your SUBARU dealer for
an inspection.
xThe components related to the EyeSight system are malfunctioning (for
example, the engine warning light illuminates). Immediately stop the
vehicle in a safe location, and contact your SUBARU dealer for an
inspection.
NOTE
xIf the EyeSight warning light illuminated or flashed, stop the vehicle in a
safe location, and after stopping the engine once, restart the engine.
xIf the indicator continues illuminating or flashing even after the engine has
been restarted, the EyeSight system has a malfunction. In this case, all
EyeSight functions will be stopped. Normal driving will still be possible.
However, contact a SUBARU dealer for an inspection.
S00858(for USA)(for Canada)
S00859
EyeSight off
Check Manual
