2016 SUBARU FORESTER check engine

52
Pre-Collision Throttle Management
When an obstacle is detected in front of the
vehicle, and the vehicle is stopped or travel-
ling very slowly, if the system determines that
the accelerator pedal has been depressed by
more than the necessary amount (due to
driver error), it greatly restricts engine output
and ensures that vehicle forward movement is
slower than normal in order to give the driver
additional time to brake or react.
During system operation, a buzzer will sound several short beeps and the lead vehicle indi-
cator and the following distance setting indicator will blink in the meter display. Also, a pop-
up screen will be displayed in the multi function display.
This function only activates when the transmission select lever is in the or position.

WARNING
Do not rely excessively on Pre-Collision Throttle Management. Pre-
Collision Throttle Management is not designed to help you avoid
collisions in many situations. Always check the selector lever and pedal
positions as well as the surrounding environment before starting and
operating the vehicle. Relying only on Pre-Collision Throttle
Management could result in an accident.
xPre-Collision Throttle Management is not designed to maintain the vehicle
in a stopped condition.
Repeated
short beeps
S00841
DM
miles
S01003S00836
Obstacle Detected
Canada only
(For USA: on the meter display)

76
EyeSight malfunction and temporary stop
If a malfunction is detected in the EyeSight system, the indicators in the meter display and
the multi function display inform the driver of the malfunction. Check the displayed contents
and take the appropriate action.
■Malfunction (including position/angle misalignment of stereo cameras)
The buzzer sounds 1 short beep and the
EyeSight warning light flashes or
illuminates. At the same time, the Pre-
Collision Braking System OFF indicator light
and the Lane Departure Warning OFF
indicator light will illuminate. A message will
also be displayed on the multi function
display.
Display Cause Action
An EyeSight malfunction or
position/angle misalignment
of stereo cameras has
occurred.Inspection and adjustment is
necessary.
Contact your SUBARU
dealer.
CAUTION
In the following conditions, the EyeSight warning light will illuminate. While
the warning light is illuminated, the EyeSight system cannot be used.
xThe stereo cameras are malfunctioning. Contact your SUBARU dealer for
an inspection.
xThe components related to the EyeSight system are malfunctioning (for
example, the engine warning light illuminates). Immediately stop the
vehicle in a safe location, and contact your SUBARU dealer for an
inspection.
NOTE
xIf the EyeSight warning light illuminated or flashed, stop the vehicle in a
safe location, and after stopping the engine once, restart the engine.
xIf the indicator continues illuminating or flashing even after the engine has
been restarted, the EyeSight system has a malfunction. In this case, all
EyeSight functions will be stopped. Normal driving will still be possible.
However, contact a SUBARU dealer for an inspection.
S00858(for USA)(for Canada)
S00859
EyeSight off
Check Manual

EyeSight malfunction and temporary stop
78
Displayed screen Cause Action

In low or high temperatures The system will restart once
the temperature is within the
operational range of the
EyeSight system.
If the system does not
restart, even when the
temperature inside the
vehicle is normal, contact
your SUBARU dealer for an
inspection.

xWhen the EyeSight
system is starting
xWhen the system has
determined that the
vehicle is extremely
inclined
xWhen the pre-collision
secondary braking has
operated 3 times after the
engine was started
xWhen the engine stops
(except for the stop due to
the start stop function).The system will restart once
the cause has been
eliminated. At this time, it
may take some time for the
system to restart.
If the system does not
restart, even after the
conditions have improved
and a period of time has
elapsed, contact your
SUBARU dealer for an
inspection.
NOTE
When a symbol from “E1” to “E3” (EyeSight temporary stop indicators) is
displayed, no EyeSight functions can be used except for Conventional Cruise
Control.
S00863
S00864
EyeSight Disabled
Temp Range
S00865
S00866
EyeSight Disabled
Check Manual