About EyeSight
15
●Selector indicator/shift position indicator
xDisplays the selector lever position or the selected gear position.
xFor turbo models, when the Adaptive Cruise Control / Conventional Cruise Control is set
while S# (Sports Sharp mode) of SI-DRIVE is selected, the display switches from the gear
position to the D position.
●Lane indicator
xWhen the Lane Departure Warning is activated, both the left and right indicators flash
simultaneously.
xWhen the Lane Sway Warning is activated, the left and right indicators flash alternately.
* Refer to pages 58 and 61.
●Steering wheel indicator
Flashes when the Lane Departure Warning or Lane Sway Warning is active.
* Refer to pages 58 and 61.
●EyeSight temporary stop indicator
xIf a malfunction occurs in the EyeSight system, the Pre-Collision Braking System OFF
indicator light and the Lane Departure Warning OFF indicator light illuminate and a sym-
bol from “E1” to “E3” will be displayed on the meter display. However, when the main
cruise control is in the OFF position, the symbol will not be displayed.
xWhen it is displayed, none of the EyeSight functions can be used except for Conventional
Cruise Control.
* Refer to page 77.
●Customization display
The settings of the alarm volume, the lead vehicle acquisition sound and the lead vehicle
start alert function can be customized when all of the following conditions are met: the
engine is running, the main cruise control is in the OFF position and the selector lever is in
the P position.
* Refer to page 79.
●EyeSight warning light
xThis indicator illuminates or flashes when a malfunction occurs in the EyeSight system.
xIt also illuminates when the ignition switch is turned to the ON position and then it turns off
approximately 5 seconds after the engine starts.
xWhen it is illuminated or flashing, none of the EyeSight functions can be used (including
Adaptive Cruise Control and the Pre-Collision Braking System, etc.).
* Refer to page 76.
●Brake system warning light (red)
If the brake system warning light illuminates during driving while the parking brake is fully
released, turn off the Pre-Collision Braking System. Also, do not use Adaptive Cruise Con-
trol or Conventional Cruise Control.
*Refer to the vehicle Owner’s Manual for details.
64
Lead Vehicle Start Alert
This function notifies the driver by means of a
buzzer and the lead vehicle indicator on the
multi information display when the driver’s
vehicle remains stopped after the vehicle in
front has started to move forward. When the
vehicle in front remains stopped continuously
(within a following distance of approximately
32 ft (10 m) and the driver’s vehicle remains
stopped for several seconds or longer), the
system continues to detect the vehicle in front
and this alarm activates if the vehicle in front
advances approximately 10 ft (3 m) or more while the driver’s vehicle remains stationary.
This function only activates when the select lever is in the , or position.
When the Lead Vehicle Start Alert activates, a buzzer sounds a two-tone beep and the lead
vehicle indicator on the meter display flashes. Also, a pop-up screen will be displayed on
the multi function display.
NOTE
xThe Lead Vehicle Start Alert function setting can be turned on or off.
* Refer to page 79.
xUnder the following conditions, the Lead Vehicle Start Alert may activate
even when the vehicle in front has not started to move, or may not activate
even after the vehicle in front has started to move:
- A motorcycle or similar object has cut in between your vehicle and the
stopped vehicle in front.
- Weather or road conditions prevent detection of the vehicle in front.
- The EyeSight stereo cameras lose detection of the vehicle in front.
- This function will not activate when the select lever is in the , or
position and the driver has not manually depressed the brake pedal.
Two-tone beep
Lead
vehicle10 ft (3 m)
or moreLead
vehicle
S00632
DMN
S01005
miles
S00906
Vehicle Ahead Has Moved
MPGF
DMN
List of buzzer sounds
75
List of buzzer sounds
*The buzzer that indicates when a lead vehicle is detected or when it is no longer detected
(lead vehicle acquisition alert), as well as the Lead Vehicle Start Alert function can be turned
on or off.
* Refer to page 79.Buzzer sound Status Reference page
Single continuous
beepPre-Collision Braking System:
Second Braking and alarm are active. Refer to page 49.
3 short beeps and
single long beepPre-Collision Braking System:
Automatic brake is cancelled after the vehicle
has been stopped with the operation of Second
Braking and alarm. Refer to page 49.
Adaptive Cruise Control:
Automatic brake is cancelled after the vehicle
has been stopped due to the stopping of the
vehicle in front. Refer to page 37.
Single long beepAdaptive Cruise Control or Conventional Cruise
Control is automatically canceled.
Refer to pages
38 and 72.
Repeated short
beepsPre-Collision Braking System
First Braking is active. Refer to page 49.
Pre-Collision Braking System
The following distance warning is active.
Pre-Collision Throttle Management is active. Refer to page 52.
The “brake more” warning from Adaptive Cruise
Control is active. Refer to page 42.
6 short beepsThe Lane Departure Warning is active. Refer to page 58.
The Lane Sway Warning is active. Refer to page 61.
1 short beepEither of the following occurred while Adaptive
Cruise Control was set.
- A vehicle in front is detected
*.
- A vehicle in front is no longer detected*. Refer to page 30.
The cruise control mode (Adaptive Cruise
Control Conventional Cruise Control) is
changed. Refer to page 67.
EyeSight is malfunctioning.
Refer to page 76.
EyeSight operation is temporarily stopped. Refer to page 77.
The Pre-Collision Braking System is turned on
or off. Refer to page 51.
Lane Departure Warning is turned on or off. Refer to page 60.
Two-tone beep Lead Vehicle Start Alert is active*. Refer to page 64.
