2016 Peugeot Traveller Owner's Manual - RHD (UK, Australia)

95
Fixed one-piece bench seat
F to raise a head restraint, pull it up until it engages in its notches.
F
t
o r
emove the head restraint, press the
lug
A and pull the head restraint upward.
F
t
o p
ut it back in place, engage the head
restraint rods in the apertures keeping
them in line with the seat backrest.
F
t
o l
ower it, press on the lug A and on the
head restraint at the same time. F

P
lace the head restraints in the low position.
the

different items of equipment and adjustments
described hereafter vary according to the version
and the configuration of your vehicle.
Angled head restraints Folding the seat backrest to
the table position
For more information on the Seat belts ,
refer to the corresponding section.
th

e bench seat includes a one-piece backrest
which may be fixed or folding (table position). F
F
rom the front, raise the handle to release
the seat backrest.
F
F
rom the rear, lower the handle to release
the seat backrest.
F F old the backrest onto the seat cushion.
F
t
o r
eturn the backrest to its normal
position, raise the handle and pull the
backrest up.
3
ease of use and comfort

96
F If your vehicle has the facility, place the seat backrest in the table position.
Tipping, access to row 3 Removing a seat
F If your vehicle has the facility, place the backrest in the table position.
F
t
i
p the seat for ward.
F
u
s

ing the handle, release the rear feet then
tip the seat for ward.
F
t
o r

eturn the seat, tip the bench towards
the rear until the feet lock into place.
It is not necessary to fold the backrest
(table position) to tip the bench seat for
access to row 3. F

R
elease the front feet using these handles.
F

D
isengage the seat from its anchorages.
F

R
emove the seat. If removing and storing a bench seat
out of the vehicle, ensure that it is
placed in a clean area, so as to avoid
introducing any foreign bodies into the
mechanisms.
th

e bench seats are not designed for
any use other than in the vehicle.
t
h
ey
have mechanisms and functions that
could be damaged if used incorrectly or
are dropped.
ease of use and comfort

97
ensure that no object, or the feet of a
passenger seated at the rear, could
obstruct the anchorage points or prevent
the correct latching of the assembly.
F

I

f your vehicle has the facility, pull the
control and raise the backrest (from the
rear, lower the lever).
Check that the seat has correctly
engaged in its anchorages on the floor
when returned to the seating position.
Refitting a seat
F engage the front feet in the anchorages in the floor (as shown above).
F

C
heck that there is nothing obstructing the
anchorages or which would prevent the
correct engagement of the feet.
F
L
ock the front feet using the handles.
F
t
i
p the seat toward the rear until the rear
feet lock into place.
Be aware of the feet of any passengers
while tipping the seat.
3
ease of use and comfort

98
Folding the backrest to the
table position
F Put the head restraints into the low position.
F
t
o r

aise a head restraint, pull it up until it
engages in its notches.
F
t
o r

emove the head restraint, press the
lug

A and pull the head restraint upward.
F
t
o p

ut it back in place, engage the head
restraint rods in the apertures keeping
them in line with the seat backrest.
F
t
o l

ower it, press on the lug A and on the
head restraint at the same time.Angled head restraints
For more information on the Seat belts ,
refer to the corresponding section. F

F
rom the front, raise the handle to release
the backrest.
F
F
rom the rear, lower the lever to release
the backrest.
Fixed rear seat and bench seatthe different levels of equipment and adjustments described hereafter vary according to the
version and the configuration of your vehicle.
th

e seat has a backrest that may be fixed or
folding (table position).
th

e bench seat has a one-piece backrest that
may be fixed or foldable (table position).
Ease of use and comfort

99
F If your vehicle has the facility, place the backrest in the table position.
Fully folding a seat, access to row 3
(example of an individual seat)
It is not necessary to fold the backrest
(table position) to tip the bench seat for
access to row 3.
F
u
s
ing the handle, release the rear feet then
tip the seat for ward.
F
t
o r
eturn the seat to the normal position,
unfold the seat backwards until the rear
feet engage in their anchorages.
F

F

old the backrest onto the cushion.
F
t
o r

eturn the backrest to the normal
position, raise the lever and pull the
backrest up (from the rear, lower the lever).
Removing a seat
(example of an individual seat)
F

I
f your vehicle has the facility, place the
backrest in the table position.
F
t
i
p the seat for ward.
F

R
elease the front feet using the handles.
F

D
isengage the seat from its anchorages.
F

R
emove the seat by the sliding door in
row
2 or from the rear in row 3.
3
ease of use and comfort

100
Check that the seat has locked into
place on the floor when returning it to
the seating position.
en
sure that no object, or the feet of a
passenger seated at the rear, could
obstruct the anchorage points or prevent
the correct latching of the assembly.
Refitting a seat
(example of an individual seat)
F

C
heck that there is no object obstructing
the anchorages and preventing the feet
locking into place.
F
e
n
gage the front feet in the anchorages on
the floor (as shown above).
F

L
ock the front feet using the handles.
F
u
n
fold the seat toward the rear until the
rear feet lock into place.
Be aware of the feet of passengers when
refitting a seat. F

I
f fitted to your vehicle, pull the control to
raise the backrest (from the rear, lower the
lever).
If removing and storing a seat (or bench
seat) out of the vehicle, ensure that it is
placed in a clean area, so as to avoid
introducing any foreign bodies into the
mechanisms.
th

e seats (or bench seats) are not
designed for any use other than in the
vehicle.
t
h

ey have mechanisms and
functions that could be damaged if used
incorrectly or are if the seat is dropped.
ease of use and comfort

101
Head restraints
F to raise a head restraint, pull it up until it engages in its notch.
F
t
o r
emove it, press the lug A and pull the
head restraint up.
F
t
o r
efit it, engage the head restraint rods in
the apertures keeping them in line with the
seat backrest.
F
t
o l
ower it, press on the lug A and on the
head restraint at the same time.
Rear seat and bench seat on rails
the different equipment and adjustments
described hereafter vary according to the
version and configuration of your vehicle.
For more information on the Seat belts ,
refer to the corresponding section. F
t
o r
ecline the backrest, raise the control
(from the rear, lower the lever).
F

R
elease the control when the desired
position is obtained.
Reclining the backrest
the reclining backrest can be adjusted to
several positions.
th

e individual seat is always on the right and
the bench seat on the left (facing for ward).
the

bench seat has two independent
backrests.
3
Ease of use and comfort

102
two controls are provided for moving the seat
forwards and backwards:
F
F
rom the front, raise the control and slide
the seat for ward or back.
F

F
rom the rear, pull the strap without going
beyond the point of resistance and push
the seat for ward or pull it back.
Moving forward or backward
(example of an individual seat)
(example of an individual seat)
Folding the seat backrest to
the table position
F Place the head restraints in the low position.
Moving the seat along the full
length of the rail
Do not leave objects (such as a bag or
toys) on the cushion when folding the
backrest.
F

P

lace the seat backrest in the table
position.
F

S

lide the seat by pulling on the rear strap.
F

F

rom the front, raise the handle to release
the backrest.
F

F

rom the rear, lower the handle to release
the backrest.
F

F

old the backrest onto the cushion.
ease of use and comfort