Page 377 of 424
11
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Fuel consumption histogram
(Only with touch screen)
This graph represents the history of average fuel consumption figures. It is accessible via the "Driving" menu of the touch screen.
These figures are calculated over the last 30 minutes in periods of 5 minutes.
R e s e t t i n g t h e h i s t o g r a m
When trip "2" is displayed, press for more than 2 seconds on the end of the wiper control stalk to also reset the fuel consumption histogram.
For more information on the trip computer, refer to the corresponding section.
60 % Hybrid Use corresponds to 60 % of the cumulative running time with the addition of the HYbrid4 system and 40 % of the time with the Diesel engine only.
Fuel consumption
Page 378 of 424

12
Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Trip computer
System that gives you information on the current journey (range, fuel consumption…).
Instrument panel screen
Press the left hand steering mounted thumbwheel to display the various trip computer tabs in succession. Or on the end of the wiper stalk.
Information display
- The current information tab with: ● t h e r a n g e , ● the current fuel consumption.
- The trip "1" tab with: ● the average speed, ● the average fuel consumption, ● the distance travelled for the first trip.
- The trip "2" tab with: ● the average speed, ● the average fuel consumption, ● the distance travelled, or the second trip.
When the desired trip is displayed, press the end of the wiper control stalk or the left hand steering mounted thumbwheel for more than two seconds. Tr i p s "1" and "2" are independent but their use is identical. For example, trip "1" can be used for daily figures, and trip "2" for monthly figures.
Trip reset
- The energy flows.
Page 379 of 424

13
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Touch screen
The information is accessible in the " Driving " menu.
Permanent display: Select the " Driving " menu.
The trip computer information is displayed in the primary page of the menu. Press one of the buttons to display the desired tab.
Temporary display in a new window: Press the end of the wiper control stalk for access to the information and display the different tabs.
The current instantaneous fuel consumption tab with: - the range,
- the current fuel consumption.
The trip "1" tab with: - the average speed, - the average fuel consumption, - the distance travelled, for the first trip.
The trip "2" tab with: - the average speed, - the average fuel consumption, - the distance travelled, for the second trip.
When the desired trip is displayed, press the reset button or for more than two seconds on the end of the wiper control stalk. Tr i p s "1" and "2" are independent but their use is identical.
For example, trip "1" can be used for daily figures, and trip "2" for monthly figures.
Information display
Trip reset
The energy flows.
The fuel consumption histogram.
Page 380 of 424

14
Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Never leave children alone inside the vehicle when the HYbrid4 system is active.
The RE ADY can come on after a RE ADY can come on after a RE ADYfew seconds if the HYbrid4 system is activated after going into energy economy mode.
Starting - switching off the HYbrid4 system
Starting the HYbrid4 system
Activation of the HYbrid4 system
In wintry conditions with the engine cold, the Diesel pre-heating warning lamp can stay on for a few seconds; wait until it goes off before releasing the brake pedal.
In the event of non-activation of the HYbrid4 system: If N is flashing in the instrument panel, move the gear selector to position A then to position N . If the " Foot on the brake " is displayed, press the brake pedal f i r m l y.
Place the gear selector at position N . Insert the electronic key in the reader. or With Keyless Entry and Starting, simply having the electronic key inside the vehicle is sufficient. or Insert the remote control key into the ignition switch and turn it towards the dashboard to position 2 (ignition on).
Press the brake pedal firmly. Make a single short press (about one second) on the " START/STOP " button. or Turn the remote control key fully towards the dashboard to position 3 (Starting). Maintain pressure on the brake pedal until the RE ADY lamp comes on, signalling RE ADY lamp comes on, signalling RE ADY
activation of the HYbrid4 system, confirmed by an audible signal.
On activation of the HYbrid4 system, the instrument panel lights up, the power indicator needle is placed at position " 0 ". The steering column automatically unlocks (perceptible noise and movement of the steering column). Depending on certain parameters, such as the state of charge of the high voltage battery or the ambient temperature, the HYbrid4 system itself determines whether it is necessary to
start the HDi Diesel engine. The mode selector is at the AUTO position.
Page 381 of 424

15
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
You can change the operating mode of the HYbrid4 system at any time using its mode selector. Driving in ZEV mode requires that particular conditions be met.
Moving off
Move the gear selector to position A(automatic mode) or M (manual mode) or R(reverse).
For more information on the electric parking brake, refer to the corresponding section in the handbook for the vehicle.
When your vehicle vehicle moves off in electric mode, it makes no noise. Be very careful of pedestrians, cyclists... as, because of this, they will not hear you coming.
Using automatic mode with the
electronic gearbox optimises gear changes and so gives more economical driving.
If automatic operation of the electric parking brake has been deactivated, pull then release the control lever to release the parking brake manually. Progressively release the brake pedal. With the parking brake released, the vehicle then moves off. If the parking brake is still applied and is in automatic mode, accelerate progressively.
Head-up display
The colour of the speedometer varies according to the drive train used: - white display: Diesel engine running, - blue display: Diesel engine stopped.
Page 382 of 424

16
Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Switching the ignition on
Turn the remote control key towards the dashboard to position 2 (ignition on) or, with the electronic key of the Keyless Entry and Starting system inside the vehicle, press the " S TA R T/STOP " button, with no action on the brake pedal to switch on the ignition for temporary use of the vehicle's ancillary equipment.
Press the " START/STOP " button, the instrument panel comes on but the HYbrid4 system does not start. Press this button again to switch off the ignition and allow the vehicle to be locked.
With the ignition on, the system automatically changes to economy mode when required to maintain an adequate state of charge of the battery.
For reasons of safety and theft protection, do not leave your electronic key in the
vehicle, even when you are close to it. It is recommended that you keep it on your person.
Switching off the HYbrid4 system
Immobilise the vehicle. Place the gear selector in position N . Make a short press (about one second) on the " START/STOP " button. or Turn the remote control key fully towards you to position 1 (Stop).
Check that the RE ADY lamp is off RE ADY lamp is off RE ADYbefore leaving the vehicle. Never leave the electronic key inside the vehicle in your absence.
The HYbrid4 stops: - the RE ADY lamp goes off, RE ADY lamp goes off, RE ADY - the steering column locks, - the electric parking brake is applied automatically, unless its automatic mode is deactivated.
Check that the parking brake warning lamps are on. Remove the electronic key from the reader. or Remove the remote control key from the ignition switch.
Before doing anything under the bonnet, the HYbrid4 must be switched off ( RE ADY lamp off) and the electric RE ADY lamp off) and the electric RE ADY
parking brake must be applied.
Page 383 of 424
17
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Emergency starting / switching off
Emergency starting with the electronic key Emergency switch-off using the electronic key
In the event of an emergency only, the engine can be switched off without conditions. To do this, press and hold the " S TA R T/STOP" button for about 3 seconds. In this case the steering column locks as soon as the vehicle is immobilised.
The electronic key must always remain inside the vehicle while in use.
Press the brake pedal firmly. Press the "START/STOP " button. The HYbrid4 system is activated; the RE ADYlamp is on.
When the electronic key is in the recognition zone and after pressing the "START/STOP"button, if the HYbrid4 system does not start: Open the housing below the "S TA R T/STOP" button. Insert the electronic key in the reader. Place the gear selector at position N .
You can remove the electronic key and close the housing.
Page 384 of 424

18
Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Mode selector
AUTO mode: for everyday use and optimised fuel consumption.
ZEV mode: for 100% electric running.
SPORT mode: to make use of the maximum per formance of the vehicle.
4WD mode: to force 4x4 drive in conditions of poor grip.
The selector allows the driver to select one of the four operating modes offered by the HYbrid4 system. Turn the dial to the right or left; the mode selected is confirmed by illumination of the corresponding indicator lamp.
By default, the selector is in the AUTOposition when starting the HYbrid4 system, whatever position it was in when the ignition was switched off.
Electronic key not recognised with Keyless Entry and Starting
If the electronic key is no longer in the recognition zone when driving or when you (later) request switching off of the HYbrid4 system, a message appears in the instrument panel.
Press and hold the " START/STOP " button for about 3 seconds if you want to force the HYbrid4 system to switch off.
Note that restarting will not be possible without the presence of the electronic key in the recognition zone.