2016 Peugeot 508 Hybrid ignition

344
508_en_Chap10d_RD5_ed01-2016
up a level in the menu.
Select a line in the list. Press one of the buttons to select the
next or previous track.
Press and hold one of the buttons for
fast forwards or backwards. Skip a track. Select a track or a folder.
Press LIST to display the menu of
folders in the compilation.
to p

lay a disc or memory stick which
has already been inserted, press
SOURCE or SRC several times in
succession and select " CD" or " USB".
Press one of the buttons to select the
next or previous folder in the order
chosen.
CD, USB
Playing a compilation
Insert an MP3 compilation in the CD
player or connect a memory stick to the
uS
B port, directly or via an extension
lead.
th

e system creates playlists (temporary
memory) the creation time for which can take
from a few seconds to several minutes.
th

e playlists are updated every time the
ignition is switched off or a
u
S
B memory stick
is connected.
Play starts automatically after a period which
depends on the capacity of the
u
S
B memory
stick.
At a first connection, the order suggested is
by folder. When connecting again, the order
previously chosen is retained.
Audio and telematics

7
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Instrument panel
Dials and screens
7. Trip distance recorder (miles or km). 8. Automatic wiping indicator lamp Service indicator (miles or km) then, total distance recorder. These two functions are displayed in turn when switching on the ignition. 9. Cruise control or speed limiter settings. 10. Gear selector position and gear engaged for the electronic gearbox or gear shift i n d i c a t o r.
1. Power indicator (%) Displays the total power currently provided by the HYbrid4 system or the rate of energy recovery. 2. READY lamp: Indicates that the vehicle is ready to drive. 3. Engine oil temperature gauge (degrees Celsius). 4. Fuel gauge. 5. Engine coolant temperature gauge (degrees Celsius). 6. Speedometer (mph or km/h).
11. Display zone: - permanent display, selectable * : energy flow, trip computer, current media playing or navigation instructions, - temporary display: engine oil level indicator, alert messages or state of functions.
* By pressing repeatedly on the end of the wiper control stalk.
Control buttons
A. Instrument lighting dimmer. B. Display of alert log. Recall of the service information. C. Reset the trip distance recorder or the service indicator (according to context).

14
Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Never leave children alone inside the vehicle when the HYbrid4 system is active.
The RE ADY can come on after a RE ADY can come on after a RE ADYfew seconds if the HYbrid4 system is activated after going into energy economy mode.
Starting - switching off the HYbrid4 system
Starting the HYbrid4 system
Activation of the HYbrid4 system
In wintry conditions with the engine cold, the Diesel pre-heating warning lamp can stay on for a few seconds; wait until it goes off before releasing the brake pedal.
In the event of non-activation of the HYbrid4 system:  If N is flashing in the instrument panel, move the gear selector to position A then to position N .  If the " Foot on the brake " is displayed, press the brake pedal f i r m l y.
 Place the gear selector at position N .  Insert the electronic key in the reader. or  With Keyless Entry and Starting, simply having the electronic key inside the vehicle is sufficient. or  Insert the remote control key into the ignition switch and turn it towards the dashboard to position 2 (ignition on).
 Press the brake pedal firmly. Make a single short press (about one second) on the " START/STOP " button. or  Turn the remote control key fully towards the dashboard to position 3 (Starting).  Maintain pressure on the brake pedal until the RE ADY lamp comes on, signalling RE ADY lamp comes on, signalling RE ADY
activation of the HYbrid4 system, confirmed by an audible signal.
On activation of the HYbrid4 system, the instrument panel lights up, the power indicator needle is placed at position " 0 ". The steering column automatically unlocks (perceptible noise and movement of the steering column). Depending on certain parameters, such as the state of charge of the high voltage battery or the ambient temperature, the HYbrid4 system itself determines whether it is necessary to
start the HDi Diesel engine. The mode selector is at the AUTO position.

16
Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Switching the ignition on
Turn the remote control key towards the dashboard to position 2 (ignition on) or, with the electronic key of the Keyless Entry and Starting system inside the vehicle, press the " S TA R T/STOP " button, with no action on the brake pedal to switch on the ignition for temporary use of the vehicle's ancillary equipment.
 Press the " START/STOP " button, the instrument panel comes on but the HYbrid4 system does not start.  Press this button again to switch off the ignition and allow the vehicle to be locked.
With the ignition on, the system automatically changes to economy mode when required to maintain an adequate state of charge of the battery.
For reasons of safety and theft protection, do not leave your electronic key in the
vehicle, even when you are close to it. It is recommended that you keep it on your person.
Switching off the HYbrid4 system
 Immobilise the vehicle.  Place the gear selector in position N .  Make a short press (about one second) on the " START/STOP " button. or  Turn the remote control key fully towards you to position 1 (Stop).
Check that the RE ADY lamp is off RE ADY lamp is off RE ADYbefore leaving the vehicle. Never leave the electronic key inside the vehicle in your absence.
The HYbrid4 stops: - the RE ADY lamp goes off, RE ADY lamp goes off, RE ADY - the steering column locks, - the electric parking brake is applied automatically, unless its automatic mode is deactivated.
 Check that the parking brake warning lamps are on.  Remove the electronic key from the reader. or  Remove the remote control key from the ignition switch.
Before doing anything under the bonnet, the HYbrid4 must be switched off ( RE ADY lamp off) and the electric RE ADY lamp off) and the electric RE ADY
parking brake must be applied.

18
Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Mode selector
AUTO mode: for everyday use and optimised fuel consumption.
ZEV mode: for 100% electric running.
SPORT mode: to make use of the maximum per formance of the vehicle.
4WD mode: to force 4x4 drive in conditions of poor grip.
The selector allows the driver to select one of the four operating modes offered by the HYbrid4 system.  Turn the dial to the right or left; the mode selected is confirmed by illumination of the corresponding indicator lamp.
By default, the selector is in the AUTOposition when starting the HYbrid4 system, whatever position it was in when the ignition was switched off.
Electronic key not recognised with Keyless Entry and Starting
If the electronic key is no longer in the recognition zone when driving or when you (later) request switching off of the HYbrid4 system, a message appears in the instrument panel.
 Press and hold the " START/STOP " button for about 3 seconds if you want to force the HYbrid4 system to switch off.
Note that restarting will not be possible without the presence of the electronic key in the recognition zone.

21
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
"ECO OFF" function
This function prevents the HDi Diesel engine being switched off and ensures that a comfortable temperature can be maintained in the passenger compartment. This therefore allows the air conditioning or heating to be kept running. Depending on version, the control is either in the switch panel alongside the steering wheel, or in the " Driving " menu of the touch screen.
The function is deactivated on switching off the ignition.
With the touch screen button
During phases of electric running and when the internal combustion engine is stopped,
the HYbrid4 system manages restarting automatically to maintain the temperature in the passenger compartment * . However, variations in temperature may still be felt in very high ambient temperatures. In this case, activate the ECO OFF function.
With the switch on the dashboard
Pressing this switch again reactivates the system. The indicator lamp in the switch goes off, accompanied by the display of a message. The HYbrid4 system returns to normal operation.
* Except in ZEV mode, which gives preference to electric running over maintaining a comfortable temperature.
Pressing this button again reactivates the system. The indicator lamp in the button goes off, accompanied by the display of a message. The HYbrid4 system returns to normal operation
 Press this switch. Deactivation is confirmed by the illumination of the indicator lamp in the switch and the display of a message. The HDi Diesel engine then restarts immediately and operates continuously.
 Select the "Driving" menu.
 In the page, press this button.
Deactivation is confirmed by the illumination of the indicator lamp in the button and the display of a message. The HDi Diesel engine then restarts immediately and operates continuously.

27
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Safety warnings related to high voltage
Before doing any work on the vehicle, switch off the ignition ( RE ADY lamp off). RE ADY lamp off). RE ADY
High voltage cables are routed under the vehicle (sills); take care not to damage them when the vehicle is used for off-road activity (such as covering rough ground).
Operations on the
battery
The high voltage battery must not in any circumstances be charged from an external power supply and must only be handled by a qualified technician at a PEUGEOT dealer or a qualified workshop. Incorrect handling may lead to serious burns, as well as electric arcs that could cause serious injury or even death.
Take care to position lifting equipment ( jack, hoist, ...) at the locations provided to avoid damaging the cables.
The voltage used for the operation of the electric motor is in the range 150 to 270 Volts. Do not handle the components of the high voltage system (identified by the orange colour): risk of electrocution and burns!
E m e r g e n c y c u t - o f f
In the event of an accident, a safety system automatically cuts-off the high voltage system and the fuel supply. The HYbrid4 system can no longer be started. You must then contact a PEUGEOT dealer or a qualified workshop.
Never touch, dismantle, remove or replace the high voltage parts, orange cables or connectors, even in the event of an accident.
Be sure to take account of the warning labels present on the vehicle. Battery electrolyte is very corrosive: risk of burns. No sparks or naked flames. Do not burn or heat. Keep out of reach of children. Do not spray or pour fluids: risk of damage to the battery. To avoid any risk to the environment, the high voltage battery must be recycled in an appropriate manner. Contact a PEUGEOT dealer or a qualified workshop.

29
.Hybrid4 system
508HY-comp_en_Chap00b_hybrid_ed01-2016
Access to the underbonnet
Recommendations
Before doing anything under the bonnet, you must switch off the ignition and verify that the RE ADY lamp in the RE ADY lamp in the RE ADYinstrument panel is off - risk of serious injury!
The alternator-starter motor of your HYbrid4 vehicle is also supplied at high voltage. If the vehicle ignition has not been switched off, there is a risk of the engine restarting at any time.
Always ensure that the ignition is switched off ( RE ADY lamp off) before RE ADY lamp off) before RE ADYopening the bonnet.