2016 PEUGEOT 108 display

243
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
Press on "MeN u" t o display the list.
tu

rn the knob to select " Radio",
press to confirm.
Select " FM AF", press to switch
traffic announcements on or off.
Receiving tA messages Digital radio
the tA (traffic Announcement)
function gives priority to playing alert
messages on the state of the traffic.
to b

e active, this function requires
good reception of a radio station that
broadcasts this type of message. As
soon as traffic information is broadcast,
the media playing is interrupted
automatically to transmit the
t
A
m

essage. Normal play of the media
is restored after transmission of the
message. Digital radio provides higher quality
reception and also additional
categories of traffic announcements
(
t

A I N FO) .
th

e range of multiplexes (sets of
analogue messages and digital data
combined in a single signal) available is
displayed in alphabetical order.
DAB (Digital Audio Broadcasting) radio
Press on " MoD e" t o select the DAB
waveband.
tu

rn the knob to manually search
down/up for stations. Briefly press one of the buttons to
automatically search down/up for
stations. In DAB mode, press the "
t

e x t
"
button to display Radio
te
xt (
tXt) f
or
the current station.
Press and hold a button to preset
(save) the station being listened to.
th
e name of the station is displayed
and an audible signal confirms the
preset.
.
Audio and telematics

244
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
Press on MeNu t o display the list.
tu

rn the knob to select " Radio" then
press to confirm.
tu

rn the knob to select " DAB AF",
press to activate or deactivate the
frequency.
DAB / FM station tracking
Digital radio does not cover 100% of
the country.
When the digital signal is weak, the
alternative DAB frequency option,
" DAB AF ", makes it possible to
continue listening to the same station,
by automatically switching to the
corresponding "FM" station (if there
i s


o n e). If "
DAB AF " tracking is activated,
there is a difference of a few seconds
when the system switches to the "FM"
analogue radio station with sometimes
a variation in volume.
When the digital signal is restored, the
system automatically changes back
to


" DA B ".
If the "DAB" station being listened to
is not available, or if " DAB AF" is not
activated, the sound will cut out while
the digital signal is too weak.
Audio and telematics

245
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
Media
uSB player
Insert a uSB memory stick into the uS B port
or connect a uS B peripheral device to the uS B
port using a suitable cable (not supplied).
th

e system builds playlists (in
temporary memory), an operation
which can take from a few seconds to
several minutes at the first connection.
Reduce the number of non-music files
and the number of folders to reduce the
waiting time.
th

e playlists are updated every
time the ignition is switched off or
connection of a
u
S
B memory stick.
However, the audio system memorises
these lists and if they are not modified,
the loading time will be shorter.
Auxiliary (AuX ) socket
Connect a portable device (MP3 player…) to
the auxiliary JACK socket using an audio cable.
Information and advice
use only uS B memory sticks formatted FAt3 2
(File Allocation ta ble).
th
e audio system plays files with the extension:
".wma", type Ver7 and Ver8 with bit rate
between 48 and 192 Kbps and type Ver9 with
bit rate between 48 and 320 Kbps.
".aac", with bit rate between 16 and 320 Kbps.
".mp3 - MP
e
g
1
" with bit rate between 32 and
320 Kbps and ".mp3 - MP
e
g
2
" with bit rate
between 8 and 160 Kbps.
th
e sampling rates supported are 11, 22, 44
and 48 KHz.
It is advisable to restrict file names to
20


characters, without using of special
characters (e.g.: " " ?
; ù) to avoid any playing
and displaying problems.
.
Audio and telematics

246
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
Audio streaming Connecting Apple® players
Streaming allows audio files on your telephone
to be played via the vehicle's speakers.
You can also view, activate or deactivate
system settings related to the Bluetooth
function.Select "Bluetooth", then "
Pairing".
Press on " M
eN

u
" t
o display the list.
tu

rn the knob to select "Bluetooth",
press to display the list.
Once connected for streaming, the
telephone is considered as a media
source.
If play does not start automatically, it
may be necessary to start audio play
from the telephone. Connect the Apple
® player to the uS
B port
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
th

e classifications available are those of the
portable device connected (artists / albums
/
genres / tracks / playlists / audio books
/
podcasts).
th

e default classification used is by artist. t
o
m

odify the classification used, return to the
first level of the menu then select the desired
classification (playlists for example) and
confirm to go down through the menu to the
desired track.
th

e version of software in the audio system
may not be compatible with the generation of
your Apple
® p l aye r.
Connect the telephone: see the "
tel

ephone
"
section.
th

e system accepts
u
S

B mass storage
devices or Apple
® players via the uS B ports. th
e adaptor cable is not supplied.
Control of the peripheral device is with the
audio system controls.
Other peripherals, not recognised on
connection, must be connected to the auxiliary
socket using a Jack cable (not supplied).
th

e system can alternatively read files via the
Bluetooth
® system and the uS B port.
It is recommended that the u
S
B cable
for the portable device is used.
Audio and telematics

247
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
telephone
Pairing a Bluetooth® telephone
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary.
Switch on the Bluetooth function of your
telephone and ensure that it is "visible to all"
(telephone configuration). If the operation fails, we recommend
switching the Bluetooth function of your
telephone off and then on again.
* If your telephone is fully compatible.
Information on progress is displayed during the
operation.
Once the procedure has been successfully
completed, a list appears with the "
t

e
L"

option.
You can then enter the settings for each of
these functions*.
us

ing the telephone's keypad, enter the PIN
displayed in the screen of the system or
confirm in the telephone the PIN displayed. Press on "
M
eN

u
" t
o display the list.
tu

rn the knob to select " Bluetooth",
press to display the list.
tu

rn the knob to select " Pairing",
press to display the system name
and code. Press on "
M
eN

u
" t
o display the list.
tu

rn the knob to select "
t
e
L"

, press
to display the list.tu rn the knob to select "
Add
contacts ", press to confirm.
tu

rn the knob to select "Phonebook",
press to confirm.
tu

rn the knob to select "
ov
erwrite
all ", press to confirm.
Select " Y
e

S" to save the settings.
You can quit at any time by pressing
this button. Press this button to navigate through
the telephone menu.
.
Audio and telematics

248
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
Receiving a call List of telephone menus
An incoming call is announced by a ring and a
superimposed display in the screen.
Press this button to accept the
incoming call. Press on MeN
u, t urn the knob to select "t eL
" , then press to display the list and move
through the menus using this knob.
to r

eject or end a call, press this
button. Press this button to navigate in the
telephone menu.
Making a call
endi

ng a call
Select " Phonebook " to go to your
contacts, then navigate using the
knob.
to d

ial a number, select "
en
ter a
phone num " in the list. Level 1 Level 2
Level 3Corresponding action
t

e
LP

honebookAdd contacts
Add a contact.
Add SD Associate a button with a contact.
Delete call history Delete the history of calls.
Delete contact Delete a contact in the directory.
Delete phonebook Delete the directory.
HF Sound
Setting Call volume
Adjust the volume for calls.
Ringtone volume Adjust the ringtone volume.
Ringtone Choose the ringtone.
t

r a n s f e r
history Overwrite all
Replace all.
Audio and telematics

249
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
List of Bluetooth® menus
Press on MeNu, t urn the knob to select " Bluetooth", then press to display the list and
move through the menus using this knob.
Level 1 Level 2 Level 3Corresponding action
Bluetooth Pairing
- Connect a portable device by
Bluetooth.
List Phone - Display the list of registered
telephones.
List Audio - Display the list of audio devices
registered.
Passkey
en

ter new passkey Change or enter a password.
B
t

Power - Activate or deactivate automatic
Bluetooth connection mode.
Bluetooth info Device name
Device address Information related to Bluetooth in
the system.
Display Setting - Activate or deactivate automatic
display of connection.
Reset Reset all
Sound Setting
Car device info Reset settings.
Bluetooth®
.
Audio and telematics

250
108_en_Chap10b_Autoradio-toyota-2_ed01-2016
Settings
System settings Audio settings
Press on "MeN u" t o display the list
of options. Press on "
MeN u" t o display the list
of options.
tu

rn the dial to select " Bluetooth",
press to display the list of Bluetooth
settings.
tu

rn the knob to select "Sound
Setting ", press to display the list of
settings for activating or deactivating
options:
-
"Bass "
-
"
tr
e b l e"
-
"Balance "
-
"ASL "
tu

rn the knob to select " Pairing",
press to display the list.
Press the corresponding button to
change or confirm the options.
the

audio settings are different and
independent for each audio source.
Audio and telematics