2016 NISSAN LEAF Navigation Manual


> (GLW    0RGHO (1-1 (91$01&*. @
5GH0374X
You can also search for charging stations near
the current location, set a charging station as a
destination or waypoint, and check detailed
information about charging stations.
ªFinding charging stationº (page 3-20)
5GH0375X
This vehicle is equipped with a TCU (Telematics
Control Unit) , a communication device that
enables communication with the Nissan Data
Center for various telematics services.
ªTelematics serviceº (page IT-4)
When connecting to the Nissan Data Center, the
system will perform an automatic charging station information update near your home once
a month. The system will also automatically
update information for charging stations near
the current vehicle location when the Li-ion
battery charge is low. You can also manually
update the charging stations around your current
vehicle location at any time.
ªUpdating charging station informationº
(page 2-7)
Energy information displayGUID-4CB444A9-385F-4183-901B-3504EF8C1BFA
5GH0376X
Estimated driving range, average energy econo-
my and instant energy economy are displayed.
ªViewing energy economy informationº
(page 2-8)
5GH0377X
Estimated driving range and energy usage of
various systems are displayed. Also, variation of
the estimated driving distances between the
climate control ON and OFF is displayed.
ªViewing energy usage informationº
(page 2-9)
Timer functionsGUID-6C3E67B8-8E0F-4DC4-8640-9C26C98270CB
5GH0378X
Charging of the Li-ion battery will automatically
start at a scheduled time according to the start
time, end time and day of the week set. The timer
charge function allows two different timer
&RQGLWLRQ
IT-3
IT. System overview


> (GLW    0RGHO (1-1 (91$01&*. @
settings. Each timer charge can be set to activate
on a different day of the week. If no timer is set,
the charge will start immediately after connecting
the charge connector.
ªSetting timer chargeº (page 2-10)
5GH0379X
The air conditioner starts to operate at the time of
day and day of the week specified in the settings.
This pre cools or heats the passenger compart-
ment before starting to drive. Electric power
consumption from the Li-ion battery resulting
from heater and air conditioner operation can be
reduced because the temperature in the pas-
senger compartment is adjusted before starting
to drive.
ªSetting Climate Ctrl. Timerº (page 2-12)
TELEMATICS SERVICEGUID-FCB0FEA1-0475-40EF-B80A-688C81D9F43CThe TCU (Telematics Control Unit) equipped in
this vehicle enables the vehicle to use various
services (NissanConnect
SMEV) by connecting
the vehicle to Nissan Data Center.
NOTE:
. Completing the NissanConnect
SMEV
registration at a NISSAN certified LEAF
dealer at the time of vehicle purchase is
necessary to use this service.
. To check the Li-ion battery charging
status or to use the remote heater and
air conditioner using an internet en-
abled smart phone or personal compu-
ter, the following conditions must be
met:
Ð The vehicle must be located in a
cellular phone or smart phone cover-
age area.
Ð The internet enabled cellular phone
or smart phone must be located in a
cellular phone or smart phone cover-
age area.
Ð The computer must be connected to
the internet. Ð
A cellular phone capable of text
messaging must be used to receive
text message regarding vehicle
charge status.
. When the remote heater and air condi-
tioner is set, the system operates the
heater and air conditioner to adjust the
in-cabin temperature to a set tempera-
ture.
. When the charge connector is discon-
nected from the vehicle, the heater and
air conditioner operates using vehicle
Li-ion battery electric power.
. If the remote heater and air conditioner
function and Li-ion battery charging are
performed at the same time, Li-ion
battery charging will take longer than
usual due to the power used to heat or
cool the vehicle.
. Certain remote functions require a
compatible smart phone, which is not
included with vehicle.
. NissanConnect
SMEV information sys-
tem features are included through a
subscription service which requires
owner consent to activate. The sub-
scription must be active to use these
features.
&RQGLWLRQ
IT-4
IT. System overview


> (GLW    0RGHO (1-1 (91$01&*. @
.NissanConnectSMEV communications
may be received at a verified e-mail
address or by SMS/text messaging-
enabled cellular phone.
. Standard text rates and/or data usage
may apply depending on your carrier.
Remote functionsGUID-09D52901-7BEA-4DE7-A590-D23EE04710BF
LNB0009X
When an Internet connection is available, you
can use a personal computer or an Internet-
enabled smart phone to check the battery status
and operate battery charging or the heater/air
conditioner remotely from another location.
Battery status check:
The status of the battery can be checked using
your personal computer or a internet enabled
smart phone even if you are not in the vehicle. You may also choose to have SMS messages
(text messages) sent to a cellular phone.
Unplugged status, Charge status:
By registering frequently used charging stations,
notifications can be sent to your personal
computer or cellular phone e-mail address to
inform you when the charging connector is
disconnected or charging is stopped mid-charge
at those locations.
Remote charge, Remote climate control:
Remote activation of battery charging or climate
control can be set using your personal computer
or a internet enabled smart phone.
Li-ion battery warmer status (if so
equipped):
When ambient temperature is low, the Li-ion
battery warmer operates automatically.
Notifications will be sent to the e-mail address
you have registered on the Nissan Data Center
under the following conditions in order to remind
you to connect the charging connector.
. Approximately 5 minutes after the Li-ion
battery warmer starts operating while the
power switch is in the OFF position and the
charging cable is not connected to the
vehicle. .
Approximately 5 minutes after the Li-ion
battery warmer stops operating due to low
remaining Li-ion battery power while the
power switch is in the OFF position and the
charging cable is not connected to the
vehicle.
NOTE:
. The remaining Li-ion battery power
lowers gradually while the Li-ion bat-
tery warmer is operating without con-
necting the charging connector.
. When the remaining Li-ion battery
power lowers, the Li-ion battery warmer
stops operating. When this occurs, the
Li-ion battery temperature lowers gra-
dually, and as a result the EV system
may be disabled.
&RQGLWLRQ
IT-5
IT. System overview


> (GLW    0RGHO (1-1 (91$01&*. @
Navigation Telematics (NissanCon-
nectSMEV)GUID-4AAFCDE9-D788-4044-A3AE-168A9064B26A
5GH0380X
When the system connects to the Nissan Data
Center, charging station information will be
automatically updated and you can receive useful
information for driving your vehicle.
Automatic update of charging stations:
The information for the charging stations that is
recorded in the map data is automatically
updated.
All Information Feeds:
Convenient information for driving such as
weather and traffic information, ECO information
shared with the LEAF users, etc. is provided.
Favorites:
When the information of an Internet site is
selected and it is stored in the page that isspecially established in the NissanConnect
SM
Website, the information is converted into an
appropriate format via the Nissan Data Center
and provided for use in the vehicle. The content
of the information is automatically read out. For
the registration method of information data, visit
the NissanConnect
SMWebsite.
&RQGLWLRQ
IT-6
IT. System overview


> (GLW    0RGHO (1-1 (91$01&*. @
1 Getting started
Control buttons and touch screen display...
.......................... 1-2
Control panel ...
........................................................................\
1-2
Steering wheel switches ...
................................................... 1-5
USB (Universal Serial Bus) Connection Port and
AUX (auxiliary) input jack ...
................................................... 1-5
Starting system ...
........................................................................\
.. 1-6
Start-up screen ...
.................................................................... 1-6
Basic operation ...
........................................................................\
.. 1-7
Selecting menu from Launch Bar ...
.................................... 1-7
Displaying Zero Emission menu screen ...
......................... 1-9
Displaying status screen ...
.................................................... 1-9
Touch panel operation ...
........................................................ 1-9
Main screen operations ...
.................................................. 1-10 Adjusting settings
...
.......................................................... 1-11
How to input letters and numbers ...
............................. 1-11
How to view and operate HOME MENU screen ...
..... 1-12
Functions disabled while driving ...
................................ 1-14
System settings ...
..................................................................... 1-15
Setting menu ...
................................................................... 1-15
Display settings ...
.............................................................. 1-16
Volume and Beeps settings ...
......................................... 1-16
Language and unit settings ...
......................................... 1-17
Clock settings ...
................................................................. 1-17
Comfort & Convenience settings ...
............................... 1-17
Connecting Bluetooth


> (GLW    0RGHO (1-1 (91$01&*. @
CONTROL BUTTONS AND
TOUCH SCREEN DISPLAY
ENJN1502-1D7E0D66-C372-4533-A154-A968B3FBAE87
CONTROL PANELENJN1502-0F79FBFA-8617-4697-9F42-8714291E5E6B
5GH0381X
*1:
Push to switch between the FM the AM
radio bands.
ª4. Audio systemº
*2:
Push to switch to an SiriusXM satellite radio
band.
ª4. Audio systemº
*3:
Push to switch between USB memory/
iPod


> (GLW    0RGHO (1-1 (91$01&*. @
guidance.
ªMap operationº (page 3-3)
*8


> (GLW    0RGHO (1-1 (91$01&*. @
.Do not apply overload to the SD card when
inserting it to the slot. Doing so may result in
a malfunction of the device.
. The SD card may be hot when it is removed
from the device. This does not indicate a
malfunction.
Opening/Closing monitorGUID-B2435AE4-F7E8-4D3F-B32A-8F56F1BA3519
5GH0382X
Open the monitor to insert/eject a CD or an SD
card.
CAUTION*8,''&())$'$$($$$$&.Be careful not to pinch your hand or
fingers while the monitor is moving
to its open or closed position. This
may cause injury to your hand or
fingers. .
Do not force the monitor to open or
close. Doing so may damage the
monitor.
When is pushed while the
monitor is closed, the monitor will open. When
is pushed while the monitor is
open, the monitor will close.
Adjusting monitor angleGUID-5422795A-E69E-4C6D-9C04-613205AF8489
LNC0003X
The angle of the monitor can be adjusted to
select from 3 different angles. Once the angle of
the monitor is selected and memorized in the
system, the selected angle is always set after
performing the open/close operation of the
monitor. Push and hold
until a chime
sounds. When the button is released, the next
preset angle will be selected. Continue this
procedure until the preferred angle is obtained.
&RQGLWLRQ
1-4
1. Getting started