5
CLOCK SET/ADJUSTMENT
WITHIN THE TRIPLE METER
Adjust the clock
1 using the trip computer’s
switch
2 and
switch
3:
1. Press the
button
until the
SETTING mode
appears in the vehicle information display.
2. Press the
switch
until “Clock” is highlighted.
3. Press the
button. The clock mode setting
menu appears.
4. Press the
button
to enter the
clock setting mode.
5. Press the
button
to begin setting the clock.
6. Press the
button
to select hours then press
. Hours is selected and minutes
is highlighted.
7. Press the
button
to set minutes then press
the
button to complete the
clock set procedure.
WITHIN THE NAVIGATION SYSTEM
Press the SETTING button
4, select the “Clock” key
using the Multi Function Controller and press the ENTER
button
5 to access the following clock settings:
On-screen Clock – When this feature is turned to
ON, a clock is always displayed in the upper right
corner of the Multi Function Display. The clock is
automatically adjusted by the GPS system.
1
2
3
FUEL-FILLER DOOR
The fuel-filler door is located on the passenger’s
side of the vehicle.
Unlock the fuel-filler door using one of the following
operations then push and release the left side
of the door to open:
• Push the door handle request switch while
carrying the NISSAN Intelligent Key
® with you.
• Press the
button on the Intelligent Key.
• Push the power door lock switch to the
position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
54
1870658_16_370Z_QRG_012315.indd 51/23/15 12:08 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
6
Clock Format – Choose either the 12-hour clock display or the 24-hour clock display.
Offset (hour) – The time can be adjusted by increasing or decreasing per hour.
Offset (min) – The time can be adjusted by increasing or decreasing per minute.
Daylight Savings Time – Turn this item to ON for daylight savings time application.
Time Zone – Choose the time zone.
For more information, refer to the “Other settings (section 7)” of your Multi Function Display Owner’s Manual, the
“Instruments and controls (section 2)” and the “Center display, heater, air conditioner, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
ENGINE OIL TEMPERATURE GAUGE
Performance driving patterns or extended driving
at elevated ambient temperatures may result in
increased engine oil temperature during operation.
During normal vehicle operation, oil temperatures
will be below 280°F (138°C). If the engine oil
temperature gauge
1 indicates 280°F (138°C) or
above while driving, reduce engine speed (RPM) and drive at a reduced vehicle speed.
When the engine oil temperature is high, the engine protection mode, whic\
h helps reduce
the chance of engine damage, may activate and automatically decrease engine p\
ower.
For more information, refer to the “Instruments and controls (section 2)”, the “Maintenance and do-it-yourself
(section 8)” and the “Technical and consumer information (section 9)” of your Owner’s Manual.
1
AUTOMATIC POWER WINDOWS
Your power windows have an automatic adjusting
function to ensure windows close completely to
help seal against wind noise and weather leaks.
When the front doors are opened, the windows
automatically lower slightly to avoid contact
between the windows and the side roof panels.
If your vehicle’s battery has been discharged
or disconnected, the power window automatic
function will not operate.
Refer to your Owner’s Manual for information on how to initialize your power window system.
If the power window functions do not operate properly after initializing\
the system, have
your vehicle checked by a NISSAN dealer.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
ESSE NTIAL I N FOR MATION
1870658_16_370Z_QRG_012315.indd 61/23/15 12:08 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
