2016 MITSUBISHI LANCER lock

Electronic immobilizer (Anti-theft starting system)5-6
Features and controls
5
For
you
to register
the
ID
code
yourself,
fol-
low
the
“Customer
key
programming”
proce-
dure belo
w.
If you
choose
to
have
your
authorized
Mit-
subishi
Motors
dealer
register
the
ID
code,
take
your
vehicle
and
all remaining
keys
to
your authorized Mitsubishi Motors dealer
.
N005622
01136
You
can
program
new
keys
to
the
system
if
you
have
two
valid
(already
registered)
keys
and
blank
(not
registered)
immobilizer
key
(specially
cut
for
your
vehicle
at
your
Mit-
subishi
Motors
dealer)
by
doing
the
follow-
ing:1.Insert
the
first
valid
key
into
the
ignition
switch
and
turn
the
key
to the
“ON”
posi-
tion for 5 seconds.2.Turn
the
key
to the
“LOCK”
position
and
remove the first key
.
3.Within
30
seconds
of
turning
the
first
key
to the
“LOCK”
position,
insert
the
second
valid
key
into
the
ignition
and
turn
it to
the
“ON”
position.
About
10
seconds
late
r, the
immobilizer
display
will
start
to
blink.4.When
the
immobilizer
display
starts
blinking,
turn
the
second
valid
key
to the
“LOCK”
position
and
remove
it.
Within
30
seconds
after
doing
so,
insert
a blank
immobilizer
key
into
the
ignition
switch
and
turn
it to the
“ON”
position.
Perform
this
operation
no
more
than
30
seconds
after
the
immobilizer
display
starts
blink-
ing.
When
registration
of
the
ID
code
is
complete,
the
immobilizer
display
will
come
on
for
3 seconds
then
go
off. If an
error
occurs,
the
immobilizer
display
will
go of
f during the procedure.
5.If you
wish
to
register
another
key
, per
-
form the process again from step 1.
Your
electronic
immobilizer
operates
on
a
radio
frequency
subject
to Federal
Communi-
cations
Commission
(FCC)
Rules
(For
vehi-
NOTE
You are pro
vided
with two keys,
but
you
may r
egister up
to eight k
eys.
Customer
key
pr
ogramming
(Except for vehicles sold in Canada)
NOTE
Perform
the
operation
when
the
interrupt
dis-
play
screen
is not
showing.
The
interrupt
dis-
play
screen
may
prevent
you
from
seeing
the
immobilizer
display
.
It is not possible to register a key if:•the
immob
ilizer
display
goe
s off during
the
procedure•the
immob
ilizer
display
doe
s not
come
on
within 30 seconds
after turning
the
ignitio
n
switch
to the “ON”
positio
n with
a blan
k
immobilizer
key
The procedure
will
be
termin
ated
automati-
cally
if:
•a period
of
30
seconds
or
longer
elapses
from
the
moment
when
the
firs
t key
is
turned
to
the
“LO
CK” pos
ition
to
the
moment
when
the
second
key
is turned
to
the “ON” pos
ition
•a period
of
30
seconds
or
longer
elapses
from
the
moment
when
the
second
key
is
turned
to
the
“LO
CK” pos
ition
to
the
moment
when
the
blank
immobilizer
key
is
turned
to the
“ON”
position
To use
the
new
remote
control
transmitters,
it
is necessary
to register
the
key
with
both
the
electronic
immobilizer
and
keyless
entry
sys-
tem. Also
refer to “Keyless
entry
system:
Cus-
tomer
remo
te
cont
rol transmitter
program-
ming” on page 5-9.
General
information
NOTE

Keyless
entry
system
(if
so
equipped)
Features and controls
5-7
5
cles
sold
in
U.S.A.)
and
Industry
Canada
Rules
(For
vehicles
sold
in
Canada).
This
device
complies
with
Part
15
of
FCC
Rules
and
Industry
Canada
licence-exempt
RSS
standard(s).Operation
is subject
to the
following
two
con-
dition
s.
This
device
may
not cause
harmfu
l inter-
ference.This
device
must
accept
any
interference
received,
including
interference
that
may
cause undesired operation.
N00509001
975
Press
the
remote
control
transmitter
buttons
to
lock
or
unlock
the
doors
and
to
open
the
trunk lid.It can
also
help
you
signal
for
attention
by
setting of
f the panic alarm.
N00542700
024
Press
the
LOCK
button
(1)
to
lock
all
the
doors. The turn signal lights will also blink once.
N0054330
1125
Press
the
UNLOCK
button
(2)
to
unlock
the
driver
’s door only
.
Within
about
2 seconds,
press
the
UNLOCK
button one more time to unlock all the doors.The
dome
light
will
turn
on
for
30
seconds.
The turn signal lights will also blink twice.The
front
side-marker
and
parking
lights
will
also turn on for about 30 seconds. Refer to “
Welcome light” on page 5-131.
N00543400
015
Press
the
trunk
button
(3)
twice
within
about
5 seconds
and
the
trunk
lid
will
be
opened.
The
trunk
lid
must
be
closed
manually
after
it
has been opened.
CAUTIONChanges
or
modifications
not
expressly
approved
by
the
manufacturer
for
compli-
ance coul
d voi
d the use
r’s authority
to ope
r-
ate
the
equipment.
Keyless entry system
(if
so
equipped)
1-
LOCK (
) button
2-
UNLOCK (
) button
3-
Trunk (
) button
4-
PANIC button
5-
Indicator light
To lock the doors

NOTE
If
you
press
the
LOCK button
(1)
twice
quickly
, the
horn w
ill s
ound
once.
To unlock the doors

NOTE
The door
unl
ock function
can
be set so
that
all
doors
unlock
when
the
UNL
OCK button
(2) is pressed once. Refer
to “Setting
of door
unlock
function”
on
page
5-9.
To open the trunk lid

Keyless
entry
system
(if
so
equipped)
5-8
Features and controls
5
N0054350
1084
Setting
of
the
horn,
turn
signal
lights
and
buzzer
of
the
keyless
entry
system
answer
-
back
function
can
be
changed
as
required.
This is done
with
the key remo
ved
from
the
ignition switch.The
horn
answerback
function
can
be
set
to
the
following
three
conditions.
Each
time
the
horn
answerback
function
is
set,
a chime
will
sound
to tell
you
the
condi-
tion of the answerback function.
1.Remove the key from the ignition switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the
LOCK
button
(1)
for
4 to 10
sec-
onds
and
press
the
UNLOCK
button
(2)
during this time.4.Release
in
sequence
the
UNLOCK
and
LOCK
buttons
within
10
seconds
of
pressing the UNLOCK button in step 3.
The
turn
signal
lights
answerback
function
can be set to the following seven conditions.Each
time
the
turn
signal
lights
answerback
function
is set,
a chime
will
sound
to tell
you
the condition of the answerback function.
1.Remove the key from the ignition switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the
UNLO
CK
button
(2)
for
4 to 10
seconds
and
press
the
LOCK
button
(1)
during this time.4.Release
in
sequence
the
UNLOCK
and
LOCK
buttons
within
10
seconds
of
pressing the LOCK button in step 3.
The
buzzer
answerback
function
can
be
turned ON or OFF as required.
Answerback function

NOTE
The
answerback
function
does
not
operate
when
the
key
is in the
ignition
switch
or any
doors
is ope
ned.
Horn
deactivation/r
eactivation

Number
of chimes
Condition
One chime
The horn will not sound.
Two
chimes
The horn will sound.
Four chimes
The horn will sound if the LOCK button is pressed twice quickl
y.
Changing the setting of the turn signal lights answerback function

Number of chimes
Condition
To lock
To un
lock
One chime
One flash
Two flashes
Number
of chimes
Condition
Two chime
s
One flash
No flash
Three chime
sNo flash
Two flashes
Four chime
s
Two flashes
One flash
Five chime
s
No flash
One flash
Six chime
s
Two flashes
No flash
Seven chimes
No flash
No flash
Buzzer
deactivation/r
eactivation

Number of chimes
Condition
To lock
To un
lock

Keyless
entry
system
(if
so
equipped)
Features and controls
5-9
5
N0054360
1131
The
door
unlock
function
can
be set
to the
following two conditions. Each
time
the
door
unlock
function
is set,
a
chime
will
sound
to tell you
the conditi
on
of
the door unlock function.1.Remove the key from the ignition switch.2.Open
the
driver
’s door
and
turn
the
com-
bination
headlights
and
dimmer
switch
to
the “OFF” position.3.Press
the
LOCK
button
(1)
for
4 to 10
sec-
onds
and
press
the
UNLOCK
button
(2)
during this time.4.Release
in
sequence
the
LOCK
and
UNLO
CK
buttons
within
10
seconds
of
pressing the LOCK button in step 3.
N00543700
018
If you
are
near
your
vehicle
and
feel
threat-
ened,
you
may
activate
the
alarm
to call
atten-
tion as follows:
1.Press
the
PANIC
button
(4)
for
more
than
1 s
econd.
2.The
headlights
will
blink
on
and
off and
the
horn
will
sound
intermittently
for
about
3 minutes.
3.To turn
off the
alarm,
press
any
button
on
the remote control transmitte
r.
N00543800
019
Only
remote
control
transmitters
pro-
grammed
with
the
vehicle’
s electronics
can
lock or unlock all doors.If you
lose
the
remote
control
transmitter
, you
can
order
a remote
control
transmitter
from
your
authorized
Mitsubishi
Motors
dealer
by
referring
to the
key
number
.
To prevent
vehicle
theft,
the
ID
codes
for
all
the
remote
control
transmitters
except
the
one
for the lost key must be programmed again.Take
your
vehicle
and
all
the
remaining
remote
control
transmitters
to your
authorized
Mitsubishi
Motors
dealer
to
have
your
ID
codes
programmed
again.
N00543900
010
To add
a remote
control
transmitte
r, you
must
already
have
one
registered
remote
control
transmitte
r.
Registering
the
ID
code
can
be
done
by
your
-
self
or
by
your
authorized
Mitsubishi
Motors
deale
r. For
you
to
register
the
ID
code
your
-
self,
follow
the
“Customer
remote
control
transmitter programming” procedure below
.
If you
choose
to
have
your
authorized
Mit-
subishi
Motors
dealer
register
the
ID
code,
take
your
vehicle
and
all
remaining
keys
to
your authorized Mitsubishi Motors dealer
.
N0054400
1174
You
can
program
new
remote
control
trans-
mitters
to
the
system
if you
have
one
valid
(already
registered)
remote
control
transmit-
ter
by
doing
the
following:
Setting of door unlock function

Number
of
chimes
Condition
One chim
e
All doors unlock
Two chimes
Driver
’s door unlock only
Using the panic alarm

Replacement r
emote contr
ol
transmitters

Additional r
emote contr
ol
transmitters

NOTE
You
are
provided
with
two
remote
control
transmitters,
but
you
may
register
up
to eight
remote
control
trans
mitters
.
Customer r
emote contr
ol trans-
mitter pr
ogramming (Except
for vehicles sold in Canada)

Keyless
entry
system
(if
so
equipped)
5-10
Features and controls
5
1.Have
available
all (current
and
new)
remote
control
transmitters
you
wish
to
registe
r.
2.With
a valid
(already
registered)
remote
control
transmitte
r, press
the
UNLOCK
button
(2)
for
4 to 10
seconds.
Then
press
and hold the LOCK button (1).3.Within
10
seconds
of
pressing
the
LOCK
button,
release
the
LOCK
and
UNLOCK
buttons in sequence.At
this
time,
ID
codes
for
all
remote
con-
trol
transmitters
except
for
the
transmitter
used
in
steps
2 and
3 are
erased
and
the
answerback
function
(door
is locked
and
unlocked)
informs
you
that
the
registra-
tion mode has been activated.4.Within
60
seconds
after
step
3, complete
the
following
ID
code
registration
opera-
tion
using
the
next
remote
control
trans-
mitter
you
wish
to
register
within
4seconds.i.Press
both
the
LOCK
and
UNLOCK
buttons
for
2 seconds.
ii.Release
both
the
LOCK
and
UNLOCK
buttons
for
1 second.
iii.
Press the UNLOCK button.The
answerback
function
informs
you
that
the
ID
code
registration
of
the
transmitter is completed.
5.To register
the
ID
codes
of
additional
remote
control
transmitters,
repeat
step
4
within 60 seconds after step 4.
6.If no
ID
code
of
a remote
control
trans-
mitter
is
registered
within
60
seconds
after
step
4, the
registration
mode
is can-
celed
and
the
normal
mode
returns.
N00546
101111
Your
keyless
entry
system
operates
on
a radio
frequency
subject
to
Federal
Communica-
tions
Commission
(FCC)
Rules
(For
vehicles
sold
in
U.S.A.)
and
Industry
Canada
Rules
(For
vehicles
sold
in
Canada).
This
device
complies
with
Part
15
of
FCC
Rules
and
Industry
Canada
licence-exempt
RSS
stan-
dard(s).Operation
is subject
to the
following
two
con-
ditions
.
This
device
may
not
cause
harmful
inter
-
ference.
NOTE
For
verification
purpose
s, try
to lock and
unl
ock the doors
after the registration
is
completed
.
The
indicator
light
(5)
comes
on
each
time
a
button
is pressed.
The keyless
entry
system
doe
s not
work
if
the key is in the ignition switch
.
The
remo
te con
trol trans
mitter
can
be use
d
from
about
40 feet
(12 m) away. However
,
this
distan
ce
may
change
if your
vehicle
is
near
a TV
transmitting
tower
, a power
sta-
tion, or a radio station.If the UNL
OCK
button
(2)
is pre
ssed whe
n
all
doors
are
locked
and
no
doors
are
opened
within about
30
seconds,
the doors
will auto-
matically
re-lock.
If the
following
conditions
are
observed
after
pressing
the
buttons
on
the
remote
control
transmitter
, the battery
in the remo
te cont
rol
transmitter
may need
to be
replaced
.
•The doors
cannot
be locked or unl
ocked.
•The trunk
lid cannot
be ope
ned.
•The panic
alarm
cannot
be operated.
•The
indicator
light
(5)
is dim
or
does
not
come
on.
If you
lose
your
remote
control
transmitter
,
pleas
e contact
an authorized
Mitsubi
shi
Motors dealer for a replacement.If you
wish to obtain
an additional
remote
control
transmitter
, please
contact
an
autho-
rized
Mitsubishi Motors
dealer
. A max
imu
m
of
eight
remote
control
transmitters
can
be
programmed for your vehicle.To use
the
new
remote
control
transmitters,
it
is necessary
to register
the
key
with
both
the
electronic
immobilizer
and
keyless
entry
sys-
tem. Also refer to “Electr
onic
immobilizer
(Anti-
theft starting
system)
: Cust
omer
key pro-
gramming”
on
page
5-6.
General information

NOTE

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-12
Features and controls
5
8.Check
the
keyless
entry
system
to see
that
it works.
N0050310
0052
The
Free-hand
Advanced
Security
Transmit-
ter
(F.A.S.T
.-key)
enables
the
doors
to
be
locked
and
unlocked,
the
trunk
lid
to
be
opened,
and
the
engine
to
be
started
simply
by carrying
it.
The
F.A.S.T
.-key
can
also
be
used
as
the
remote
control
transmitter
of
the
keyless
entry system. Refer
to
“Free-hand
Advanced
Security
Transmitter
(F.A.S.T
.-key)”:
“Keyless
entry
system” on page 5-30.
NOTE
You
may
purchas
e a replacement
battery
at
an electr
ic applian
ce s
tore
.
Your
authorized
Mitsubi
shi Mot
ors
dealer
can
replace
the battery
for
you
if you
pre
fer.
CAUTIONWhen
the
remote
control
transmitter
case
is
open
ed, be
careful to keep
water
, dus
t, etc.
out.
Also,
do
not
touch
the
internal
compo-
nents
.
Fr
ee-hand Advanced Secu-
rity T
ransmitter (F
.A.S.T
.-
key)
(if so equipped)
The
F.A.S.T
.-key
must
be
carried
by
the
driver
. The F
.A.S.T
.-key is r
equir
ed for
vehicle operations such as locking and unlocking the doors, opening the trunk lid,
and
starting
the
engine.
When
leaving
the vehicle, make sur
e you ar
e carrying
the F
.A.S.T
.-key and then lock the vehi-
cle.
W
AR
NING
Indi
vidual
s who
use
impl
antable
pace-
makers
or
implantable
cardioverter
-defi-
brillator
s shoul
d keep
away
from
the
ext
ern
al
and
internal
transmitters.
The
elect
romagne
tic
wave
s use
d in the
F.A.S.T
.-ke
y may
affect
the
operati
on
of
impl
antable
pacemakers
and
impl
antabl
e
cardiovert
er-de
fibrillator
s.
A-
External transmitter
B-
Internal transmitterW
AR
NING
Indi
vidual
s usi
ng
other
elect
rica
l medica
l
appar
atuse
s besides impl
antable
pace-
makers
and
impl
antable
cardiovert
er-
defibrillators
should
check
with
the
manu-
fac
tur
er
of
the
appar
atus
to
confirm
the
effect
of
the
elect
romagne
tic wave
s use
d
by
the
F.A.S.T
.-ke
y. The
elect
romagne
tic
waves
may
affect
the
operations
of
the
elect
ro-me
dical
appar
atus.

Free-hand Advanced Security Transmit
ter (F.A.S.T.-key) (if so equipped)
Features and controls
5-13
5
The o
perati
ons po
ssib
le wit
h the F
.A.S.T
.-
key
can
be
modified
as
stated
below
.
(Keyless
entry
operations
are
possible.)
For
details,
contact
an
authorized
Mitsubi-
shi Motors deale
r.
•Enabling
only
the
locking
and
unlocking
of the
doors
and
the
opening
of the
trunk
lid•Enabling only the starting of the engine•Deactivating the
F.A.S.T
.-key
N0050320
1193
When
a person
enters
the
operating
range
of
the
F.A.S.T
.-key
while
carrying
the
F.A.S.T
.-
key
and
presses
the
dri
ver’s or
front
passen-
ger
’s door
lock/unlock
switch
or the
trunk
lid
OPEN
switch,
verification
of
the
ID
code
is
performed. The
F.A.S.T
.-key
enables
the
doors
to
be
locked
and
unlocked,
the
trunk
lid
to
be
opened
and
the
engine
to
be
started
only
when
the
ID
codes
of
the
vehicle
and
F.A.S.T
.-key match.
The
operating
range
is within
about
2.3
feet
(70
cm)
of
the
driver
’s and
front
passenger
’s
door
lock/unlock
switches,
and
the
center
of
the trunk lid.
NOTE
The
F.A.S.T
.-key
uses
weak
electromagnetic
waves.In
cases
such
as
the
following,
operation
may
be improper
or unstable.
•The
vehicle
is near
a facility
that
emits
strong electromagnetic waves, such as a
TV
transmitting
tower
, a power
station,
a radio
station or a
n airport
•The key is carried
togeth
er with other com-
munication
devices
such
as cellular
phones
or
radios,
or
electr
ical
applian
ces
suc
h as
computer
s
•The F.A.S.T
.-key
touches
or is covered
by
a
metal
object
•A keyless
entry
system
is being
used
nearby•The battery
of the
F.A.S.T
.-key is run
down
•The
vehicle
is in
a location
with
strong
electromagnetic waves or noise
Use
the
emer
gency
key
in
such
circum-
stances. Refer
to
“To operate
using
the
emer
gency
key” on page
5-22.
The
F.A.S.T.-key
is cons
tantly
performing
reception
operations
in
its communication
with
the
vehicle.
This
means
that
the
battery
is always
running
down,
regardless
of
how
often
the
F.A.S.T.-key
is use
d. The
batter
y
life
is about
1 to 3 years,
depending
on
the
usage con
ditions.
Since the F.A.S.T
.-key
is constan
tly perfo
rm-
ing
reception
operatio
ns, the reception
of
stron
g electromag
netic
waves can
acceler
ate
the
run
ning
down
of the
batter
y. Do
not place
near
electr
ical
app
lian
ces
such
as telev
ision
s
or computers.
Operating range of the F.A
.S.T
.-k
ey
NOTE
NOTE
When the battery
of the F.A.S.T
.-ke
y has run
down
or
there are strong
electromagnetic
waves or
noi
se in the area, the ope
ratin
g
range
could
decreas
e or
operations
could
become
uns
table.
Operating range for locking and unlocking the doors and for open- ing
the
trunk
lid

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-14
Features and controls
5
N0050330
0025
The
operating
range
is
the
interior
of
the
vehicle.
N0050340
1241
While
carrying
the
F.A.S.T
.-key
, press
the
driver
’s or front
passenger
’s door
lock/unlock
switch
(A)
within
the
operating
range
to lock
all the doors. The
turn
signal
lights
will
blink
once
and
the
buzzer will sound once. Also
refer
to
“Door
locks”
and
“Power
door
locks” on pages 5-34 and 5-37 respectively
.
*:Front of the vehicle
:Operating range
NOTE
Only
the
F.A.S.T
.-key
that
is detectable
by
the
doors
and
the
trunk
lid
can
lock
and
unlock
the
doors
and
open
the
trunk
lid.
The system
may
not
ope
rate
if the F.A.S.T
.-
key is too
close
to the windshield,
door
win-
dows
or trunk
lid.
Even if the
F.A.S.T
.-key
is within
abou
t
2.3feet
(70
cm)
of the driver
’s or front pas-
senger
’s door lock/un
lock
switch
and
cen
ter
of the
trunk
lid,
the
system
may
not
operate
if the
key
is close
to the
ground
or in a high
position.If the
F.A.S.T
.-key
is within
the
operating
range,
even
a person
not
carrying
the
F.A.S.T
.-key
can
lock
and
unl
ock
the doors
or open
the
trunk
lid
by
pressing
the
driver
’s
or front
passenger
’s door lock/u
nlock
switch
or the trunk
lid
OPE
N switch.
Operating range for starting the engine
*:
Front of the vehicle
:Operating range
NOTE
Even
if the F.A.S.T
.-ke
y is within the
oper
at-
ing
range,
it may
not
be
possible
to start
the
engi
ne if the key is in a stora
ge space suc
h as
the glove
compartmen
t, on
top
of the instru-
ment
panel,
or
in the
door
pocket
or
trunk
compartment.Even
if the
F.A.S.T.-key
is outs
ide
the
vehi-
cle,
it may
be
possible
to start
the
engine
if
the key is too
close
to a door
or door
win-
dow
.
To operate using the F
.A.S.T
.-
key

To lock the doors

NOTE
In cas
es such
as the
follow
ing,
the
F.A.S.T.-
key does not operate.