2016 MITSUBISHI iMiEV Owners Manual

Steering wheel audio remote control switch (if so equipped)
Comfort controls 7-23
7
It can be used when the electric motor switch is in the “ON” or “ACC” position. Press the power switch to turn on the power. When the power is turned on, the last mode
used before turning off is displayed. To turn off the power, press and hold down the powerswitch for about 2 seconds until you hear a beep. While the button is pressed, the volume will continue to increase. While the button is pressed, the volume will continue to decrease. Press the mode selector button to select the desired mode.The mode changes in the following order. AM
 FM1
 FM2
 CD
 USB or iPod
*
 Bluetooth
®*  AM
* : If you connect these devices.
Press the mode selector button and select AM or FM mode. After pressing one of
these buttons, a receiv-
able station will be automatically selected and reception of the st
ation will begin.
Press the mode selector
button and select CD
mode. To fast forward or fast
reverse the disc, press
the fast-forward button or the fast-reverse button. You can fast forward the disc by holding down the fast-forward button. While the but-
1- Volume up button 2- Volume down button 3- Power switch/Mode selector button4- Seek up/Track up/File up/Fast-forward
button
5- Seek down/Track down/File
down/Fast-reverse buttonNOTE
 Do not press multiple buttons at the same time when using the steering wheel audioremote control switch.
To turn on the power

Vo l u m e c o n t r o l

Volume up button

Volume down button

Mode selection

To listen to the radio

Automatic tuning

Seek up button/Seek down buttonTo listen to a CD

To fast forward/reverse the disc (music CDs only)

Fast forward
BK0220401US.book 23 ページ ２０１５年６月３日　水曜日　午前７時４２分

Error codes 7-24 Comfort controls
7
ton is kept pressed, th
e disc will be fast-for-
warded. You can fast reverse the disc by holding down the fast-reverse button. While the button is kept pressed, the disc
will be fast-reversed.
You can select your desired track by using the track up button or the track down button.
Press the mode select
or button and select
iPod mode. Press the button repeatedly until the desired track number appears on the display. Press the button repeatedly until the desired track number appears on the display.
Press the mode select
or button and select
USB mode. Press the button repeated
ly until the desired
track number appears on the display. Press the button repeated
ly until the desired
track number appears on the display.
N00736100777
If an error code appears in the display, take action in accordance with the table below. Fast reverse
NOTE
 With an MP3 CD, you can fast forward and fast reverse tracks in the same folder.
To select a desired track

NOTE
 Pressing the track down button once during the song will cause the system to restart playing from the beginning of the song.
To listen to an iPod

To select a desired track

Track up button
NOTE
 The track number continues to increase while the button is pressed.
Track down button
NOTE
 The track number cont
inues to decrease
while the button is pressed.
To listen to a USB memory device

To select a desired file

File up button
NOTE
 The track number continues to increase while the button is pressed.
File down button
NOTE
 The track number cont
inues to decrease
while the button is pressed.
Error codes BK0220401US.book 24 ページ ２０１５年６月３日　水曜日　午前７時４２分

Handling of compact discs Comfort controls 7-25
7
N00734100340
 Use only the type of compact discs that have the mark shown in the illustration below. (Playback of CD-R or CD-RW discs may cause problems.)
 The use of special shaped, damaged com- pact discs (like cracked discs) or low- quality compact discs (like warped discsor burrs on the discs)
such as those shown
will damage the CD player.
Error display
Problem
Item
Repair
NO DISC No disc inserted Disc is
not in CD player. Insert disc.
CHECK DISC Focus error
Disc is not loaded correctly, or condensation on disc.
Insert disc with label facing up. Remove moisture from disc.
DISC ERROR Disc error
Disc is dirty, scratched,
or deformed; or exces-
sive vehicle vibration.
Clean or replace disc.
Retry when vibrations
stop.
INTERNAL E Mechanism error
Loading or eject error. Pick-up is out of posi- tion.
Eject disc and reload. If di
sc will not eject, bring
your vehicle to a certified i-MiEV dealer.
HEAT ERROR
Inside of audio system is hot.
Internal protection agai
nst high temperatures.
Allow radio to cool
by waiting about 30 min-
utes.
ERROR DC DC offset output voltage Foreign materi
al is inside of radio or amplifier. Bri
ng your vehicle to a certified i-MiEV deale
r.
ERROR
Communication or power supply error
Communication error betw
een external device
and equipment. Power supply error of external device.
Bring your vehicle to a certified i-MiEV dealer.
Handling of compact discs
BK0220401US.book 25 ページ ２０１５年６月３日　水曜日　午前７時４２分

Handling of compact discs 7-26 Comfort controls
7
 In the following circumstances, moisture can form on compact discs and inside theaudio system, preventing normal opera- tion. • When there is high humidity (for exam-ple, when it is raining). • When the temperature suddenly rises, such as right after the heater is turned onin cold weather. In this case, wait until the moisture has had time to dry out.
 When the CD player is subjected to vio- lent vibrations, such as during off-roaddriving, the tracking may not work.  When storing compact discs, always store them in their separate
cases. Never place
compact discs in direct sunlight, or in any place where the temperature or humidity is high. Never touch the flat surface of the disc where there isn’t a label. This will damage the disc surface and could affect the sound quality. When handli
ng a compact disc,
always hold it by the outer edge and thecenter hole.  To clean a disc, use a soft, clean, dry cloth. Wipe directly
from the center hole
toward the outer edge. Do not wipe in a circle. Never use any chemicals such as benzine, paint thi
nner, a disc spray
cleaner, or an anti-static agent on the disc.  Do not use a ball point
pen, felt pen, pen-
cil, etc. to write on the label surface of thedisc.  Do not put additional la
bels or stickers on
compact discs. Also, do not use any com-pact disc on which a label or sticker has started to peel off or any compact disc that has stickiness or ot
her contamination left
by a peeled-off label or sticker. If you use such a compact disc, the CD player may stop working properly and you may not beable to eject the compact disc.
N00751900112
 You may have trouble playing back some CD-R/RW discs recorded on CD record- ers (CD-R/RW drives), either due to theirrecording characteristics or dirt, finger- prints, scratches, etc.
on the disc surface.
 CD-R/RW discs are less resistant to high temperatures and high humidity than ordi- nary music CDs and can therefore be damaged and rendered unplayable if left inside your vehicle for a long time.  Depending on the combination of the writing software, the CD recorder (CD- R/RW drive), and the disc used to create a CD-R/RW, the disc might not play suc-cessfully.  This player cannot play the CD-R/RW discs if the sessi
on is not closed.
 This player cannot play CD-R/RW discs which contain data other than CD-DA or MP3 data (Video CD, etc.). Be sure to observe the handling instruc- tions for the CD-R/RW disc.
Notes on CD-Rs/RWs
BK0220401US.book 26 ページ ２０１５年６月３日　水曜日　午前７時４２分

Antenna
Comfort controls 7-27
7
N00734200471
Turn the pole (A) counterclockwise. Screw the pole (A) clockwise into the base (B) until it is securely retained.
N00755000124
The time is displayed when the electric motorswitch is in the “
1. Press and hold the clock button and the clock display flashes. 2. Press the SEEK button to adjust the“hours” digit. If you keep pressing the button, fast-for- ward begins.3. When the “hours” digit is adjusted, press the clock button to flash the “minutes” digit.Press the SEEK button to adjust the “min- utes” digit. If you keep pressing the button, fast-for-ward begins.
WA R N I N G Operating the CD player in a manner other than specifically instructed hereinmay result in hazardous radiation expo-sure. Do not remove the cover and attempt to repair the CD player by yourself. There are no user serviceable parts inside. Incase of malfunction, contact a certified i- MiEV dealer.
Antenna To remove To install
NOTE
 Be sure to remove the roof antenna in the following cases: • When using an automatic car wash • When covering your vehicle with a car cover • When driving into a structure that has a low ceiling.
Clock
(if so equipped)
To set the time

A- Clock button B- SEEK (clock adjustment up) buttonC- SEEK (clock adjustment down) but-
ton
BK0220401US.book 27 ページ ２０１５年６月３日　水曜日　午前７時４２分

General information about your radio 7-28 Comfort controls
7
4. When the time is set, press the clock but- ton to stop the clock display from flash-ing.
N00733900439
Your vehicle’s radio receives both AM andFM stations. The quality of your reception is affected by distance, obstacles, an
d signal interference.
This radio complies with Part 15 of Federal Communications Commission (FCC) Rules (for vehicles sold in U.S.A.). Operation is subject to the following conditions:  The device may not cause harmful inter- ference.  This device must ac
cept any interference
recieved, including interference that maycause undesirable operation.
FM signals do not follow the earth surface nor are they reflected by the upper atmo-sphere. For this reason,
FM broadcasts cannot
be received over long distances. AM signals follow the earth’s surface and are reflected bythe upper atmosphere. For this reason, AM broadcasts can be received over longer dis- tances.
Because of the limite
d range of FM signals
and the way FM waves transmit, you may experience weak or fading FM reception.When the broadcast is blocked by mountains or similar obstructions,
reception ca
n be dis-
turbed. The reason why one can hear FM but not AM in parking garages, unde
r bridges etc., is that
FM signals, unlike AM
signals, are reflected
by solid objects such
as buildings, etc.
Because FM signals are easily reflected by buildings, this can also
cause reception dis-
turbances.The direct signal from
the broadcast station
reaches the antenna slightly before the reflected signal. This
time difference may
cause some reception di
sturbance or flutter.
This problem occurs primarily in urban areas.
NOTE
 Reset the time after the 12V starter battery terminals are disconnect
ed and reconnected.
 Seconds do not appear
in the clock display,
but after adjusting the
“minutes” setting, the
clock begins to opera
te from 0 seconds.
General information about your radio
CAUTION Changes or modifica
tions not expressly
approved by the party meeting the aboveconditions could void th
e user’s authority to
operate the equipment.
Signal transmission FM AM 25 to 40 mile radius (25 to 40 miles)
100 mile radius (100 miles)
Weak reception (fading) Reflection
BK0220401US.book 28 ページ ２０１５年６月３日　水曜日　午前７時４２分

General information about your radio
Comfort controls 7-29
7
If one listens to a weak station and is in the vicinity of another st
rong station, both sta-
tions might be received simultaneously.
Stereo reception requires a high quality broadcast signal. This means that types of disturbances mentioned previously becomemore marked and the reception range is somewhat diminished during stereo recep- tion. FM reception is affected by the electrical sys- tems of vehicles in the vicinity, especially those without an electr
onic noise suppression
device. The disturbance is even greater if thestation is weak or poorly tuned. FM reception is not as sensitive to electrical disturbances as AM. AM
reception is sensi-
tive to electrical dist
urbances such as power
lines, lightning and ot
her types of similar
electrical phenomena.
Cross modulation
FM stereo reception Causes of disturbances
BK0220401US.book 29 ページ ２０１５年６月３日　水曜日　午前７時４２分

BK0220401US.book 30 ページ ２０１５年６月３日　水曜日　午前７時４２分