2016 MINI Clubman Owner's Manual

The vehicle manufacturer recommends that
you have a dealer

CoolantVehicle
features
and
op

Adding1.Let the engine cool.2.Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres~
sure to dissipate, then open it.3.If the coolant is low, slowly add coolant up
to the specified level; do not overfill.4.Close cap.5.Have the cause of the coolant loss elimi~
nated as soon as possible.
Disposal
Comply with the relevant environmen~tal protection regulations when dispos~ ing of coolant and coolant additives.
Seite 211CoolantMOBILITY211
Online Edition for Part no. 01 40 2 972 253 - VI/16

MaintenanceVehicle
features
and
op

service center or repair shop. Records of regu~
lar maintenance and repair work should be re~
tained.
Socket
for
OBD
Onboard
Diagnosis
Safety
information NOTE
The socket for Onboard Diagnosis is an
intricate component intended to be used in
conjunction with specialized equipment to
check the vehicle

Replacing
componentsVehicle
features
and
op

3.Continue turning the wiper blade all the
way so that it pops out of the holder.4.Press the new wiper blade into the holder
until you hear it snap into place.5.Fold the wipers in.
Lamp
and
bulb
replace

Front
lights,
bulb
replacement
Overview
Halogen
headlights1Low beams/high beams2Turn signal
LED
headlights
1Daytime running lights2Low beams/high beams3Turn signalBug
light1Parking lights2Daytime running lights3Fog lights
LED
bug
light
1Parking lights2Fog lights
LED
low
beams/LED
high
beams Follow the general instructions on lights andbulbs, refer to page 215.
The lights feature LED technology. In the case
of a malfunction, contact a dealer