2016 MINI Clubman Owner's Manual

Range
Display With a low remaining range:'

Entering
appointment
dates
Enter the dates for the mandatory vehicle in~
spections.
Make sure that the vehicle's date and time are
set correctly.
On the Control Display:1. "Vehicle info"2."Vehicle status"3. "Service required"4."g Vehicle inspection"5."Date:"6.Adjust the settings.7.Confirm.
The entered date is stored.
Gear
shift
indicator
The
concept
The system recommends the most fuel efficient gear for the current driving situation.
General
information Depending on the vehicle's features and coun~
try version of the vehicle, the gear shift indica~
tor is active in the manual mode of the Step~
tronic transmission and with manual
transmission.
Suggestions to shift gear up or down are dis~
played in the instrument cluster.
Manual
transmission:
displaying
ExampleDescriptionFuel efficient gear is set.Shift into fuel efficient gear.Steptronic
transmission:
displayingExampleDescriptionFuel efficient gear is set.Shift into fuel efficient gear.
Speed
limit
detection
Speed
Limit
Info
Concept Speed Limit Info shows the current maximum
permitted speed in the instrument cluster.
General
information The camera at the base of the interior mirrordetects traffic signs at the edge of the road as
well as variable overhead sign posts. Traffic
signs with extra symbols for wet road condi~
tions, etc. are also detected and compared with
the vehicle's onboard data, such as for the rain sensor, and will be displayed depending on thesituation.
With the navigation system, the system takes into account the information stored in the navi~
gation data and also displays speed limits
present on routes without signs.
Without a navigation system, the system is sub~
ject to limitations imposed by technology. Traf~
fic signs with speed limitations are detected
and displayed only. Speed limitations due to
entering or exiting towns, highway signs, etc.
are not displayed. Speed limits with extra text
characters are always displayed.
Seite 90CONTROLSDisplays90
Online Edition for Part no. 01 40 2 972 253 - VI/16

Safety
informationWARNING
The system does not release from the
personal responsibility to correctly assess visi~
bility and traffic situation. There is a risk of an
accident. Adjust the driving style to the traffic
conditions. Watch traffic closely and actively in~ tervene in the respective situations. '

'

When destination guidance is activated in
the navigation system.'

The time must be correctly set.
Speed
limit
detection
Speed limit detection is preset. Description of the speed limit detection, refer to page 90,
function.
Trip
onboard
computerThe vehicle features two types of onboardcomputers.'

Via MINI Driving Modes switch:1.Activate SPORT.2. "Driving Excitement"3. "Vehicle and surroundings"
Speed
warning
Concept It is possible to set a speed limit which, when
reached, will trigger a warning.
General
information
The warning is repeated if the vehicle speed drops below the set speed limit once by at least
3 mph/5 km/h.
Displaying,
setting
or
changing
the
limit
On the Control Display:
1. "Settings"2."Speed"3."Warning at:"4.Turn the Controller until the desired limit is
displayed.5.Press the Controller.
The speed limit is stored.
Activating/deactivating
the
limit On the Control Display:
1. "Settings"2."Speed"3."Warning"4.Press the Controller.
Setting
your
current
speed
as
the
limit On the Control Display:
1. "Settings"2."Speed"3."Select current speed"4.Press the Controller.
The current vehicle speed is stored as the
limit.
Settings
on
the
Control
Display
Time
Setting
the
time
zone
1. "Settings"2."Time/Date"3."Time zone:"4.Select the desired time zone.
The time zone is stored.
Setting
the
time
1. "Settings"2."Time/Date"3."Time:"4.Turn the Controller until the desired hours
are displayed.5.Press the Controller.6.Turn the Controller until the desired mi~ nutes are displayed.7.Press the Controller.
The time is stored.
Setting
the
time
format
1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The time format is stored.
Seite 95DisplaysCONTROLS95
Online Edition for Part no. 01 40 2 972 253 - VI/16

Date
Setting
the
date1. "Settings"2."Time/Date"3."Date:"4.Turn the Controller until the desired day is
displayed.5.Press the Controller.6.Make the necessary settings for the month
and year.
The date is stored.
Setting
the
date
format
1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The date format is stored.
Language
Setting
the
language
To set the language on the Control Display:
1. "Settings"2."Language/Units"3."Language:"4.Select the desired language.
Settings are stored for the profile currently
used.
Setting
the
voice
dialog Voice dialog for the voice activation system, re~
fer to page 27.
Units
of
measurement
Setting
the
units
of
measurement
To set the units for fuel consumption, route/
distance and temperature:1. "Settings"2."Language/Units"3.Select the desired menu item.4.Select the desired unit.
Settings are stored for the profile currently
used.
Brightness.
Setting
the
brightness To set the brightness of the Control Display:
1. "Settings"2."Control display"3."Brightness"4.Turn the Controller until the desired bright~ness is set.5.Press the Controller.
Settings are stored for the profile currently
used.
Depending on the light conditions, the bright~ ness settings may not be clearly visible.
LED
ring
on
the
central
instrument
cluster
The
concept
The LED ring displays light animations to repre~
sent specific functions.
Basic
displays
Basic functions, for example the tachometer,
can be set to be displayed continually if so de~ sired.
Seite 96CONTROLSDisplays96
Online Edition for Part no. 01 40 2 972 253 - VI/16