2016 MERCEDES-BENZ S-Class SEDAN Comand Manual

XTo select massage programs: turn and
press the controller.
The massage program runs for approx-
imately 15 to 25 minutes, depending on thesetting.
XTo change the massage intensity: turn the
controller to :and press to confirm.
The intensity changes between gentle and
vigorous each time the controller is
pressed.
XTo exit the menu: press the%button.
Resetting all adjustments
XCall up the seat functions (Ypage 68).
XSelect a seat (Ypage 68).
XTo select Reset: turn and press the con-
troller.
XTo select a seat: slide 1the controller.
XTo reset: press the controller.
A prompt appears.
XTo select YesorNo: turn and press the con-
troller.
If you select No
the process is canceled.
After selecting Yes
all seat adjustments are
reset to the default values (factory setting).
Climate control settings
Overview
You have the following options for adjusting
climate control settings:
Rusing the climate control bar
Rusing the climate control menu
You can set the most important climate con-
trol functions such as temperature, airflow
and air distribution using the climate control
bar. The climate control bar is visible in most
displays.
You can find all the climate control functions
in the climate control menu. You can use the
climate control bar (
Ypage 71) to switch to
the climate control menu.
Settings in the climate control bar
Overview
You can set the most important climate con-
trol functions directly in the climate control
bar and change them in the climate control
menu.
:Adjusts temperature, airflow and air dis-
tribution, left, as well as displaying the
current setting
;Calls up the climate control menu, dis-
plays the current cooling and climate
mode setting
=Adjusts temperature, airflow and air dis-
tribution, right, as well as displaying the
current setting
Climate control settings71
Vehicle functions
Z

Switching to the climate control bar:
XPress theØbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
XSlide 6, release, then slide 6again,
turn and press the controller.
A menu appears.
Calling up the climate control bar
XPress the Øbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
XSlide 6the controller repeatedly until the
climate control bar is activated.
Setting the temperature
XCall up the climate control bar
(
Ypage 72)
XTo select the current temperature on the
left or right: turn and press the controller.
The temperature setting scale appears.
XTo change the setting: turn the controller.
iYou can also use the climate control menu
(
Ypage 73) to set the temperature.
Setting the airflow
XCall up the climate control bar
(
Ypage 72)
XTo select Jon the left or right: turn and
press the controller.
The airflow setting scale appears.
XTo change the setting: turn the controller.
iYou can also use the climate control menu
(
Ypage 73) to set the airflow.
Setting the air distribution
XCall up the climate control bar
(
Ypage 72)
XTo select the current air distribution display
on the left or right, e.g. O: turn and
press the controller.
The air distribution setting scale appears.
XTo change the setting: turn the controller.
iYou can also use the climate control menu
(
Ypage 71) to set the air distribution.
72Climate control settings
Vehicle functions

Settings in the climate menu
Overview
In the climate control menu there are settings
available in the bottom bar and the main area.
Calling up the climate control menu
XSwitch to the climate control bar
(
Ypage 71).
XTo select from climate control bar ;: turn
and press the controller.
The menu for selecting climate control
functions is activated.
XTo select the desired climate control func-
tion: turn and press the controller.
The selected climate control function
appears.
Switching climate control on/off
This setting is made in the bottom bar of the
climate control menu.
XCall up the climate control menu
(
Ypage 73).
XTo switch to the footer: slide 6the con-
troller.
XTo select OClimate Ctrl On: turn and
press the controller.
The climate control is switched on Oor off
ª depending on the settings.
If the climate control is switched off:
Rthe climate control setting functions are
deactivated.
Rthe blower is switched off.
Rthe air recirculation flaps are closed.
Activating/deactivating cooling with
air dehumidification
This setting is made in the bottom bar of the
climate control menu.
iActivating the cooling with air dehumidi-
fication facilitates the cooling of the vehicle
interior even with high outside tempera-
tures.
XCall up the climate control menu
(
Ypage 73).
XTo switch to the footer: slide 6the con-
troller.
XTo select A/C: turn and press the controller.
XSwitch cooling with air dehumidification on
O or off ª.
iThe current status of the cooling function
is displayed in the climate control bar: A/C
ON – activated, A/C OFF – deactivated
(
Ypage 71).
iDeactivating the cooling with air dehu-
midification function reduces fuel con-
sumption.
Switching the synchronization function
on/off
This setting is made in the bottom bar of the
climate control menu.
Climate control settings73
Vehicle functions
Z

With theOSync(synchronization) option,
you can decide whether you wish to activate
the climate control settings for all zones
together or separately.
XCall up the climate control menu
(
Ypage 73).
XTo switch to the footer: slide 6the con-
troller.
XTo select OSync: turn and press the con-
troller.
XSwitch the synchronization function on O
or off ª.
With the synchronization function switched
off, you can alternate between driver and
front passenger.
XTo switch from the footer to the main area:
slide 5the controller.
XTo switch between left and right: slide
1 the controller.
Not all climate control functions allow
switching between the driver and front
passenger.
Further information on the synchronization
function (see the vehicle Operator's Manual).
Rear-compartment climate control set-
tings
This setting is made in the bottom bar of the
climate control menu.
You can also set the rear-compartment air
conditioning from the front.
XCall up the climate control menu
(
Ypage 73).
XTo switch to the footer: slide 6the con-
troller.
XTo select Rear Setting: turn and press
the controller.
Activate the rear-compartment climate
control settings. The vehicle interior dis-
play changes accordingly.
XTo switch the setting back to the front
again: select Return to Front
.
After a short time, COMAND automatically
switches the adjustment functions back to
the front.
Adjusting the footwell temperature
This setting is made in the main area of the
climate control menu.
XCall up the climate control menu
(
Ypage 73).
XTo select Adjust Footwell: turn and
press the controller.
XIf necessary, change sides: slide 1the
controller.
XTo change the setting: turn and press the
controller.
Exiting a menu
XPress the %button.
74Climate control settings
Vehicle functions

Adjusting the climatemode settings
This setting is made in th emain area of th e
climat econtrol menu.
The setting is only active when th eair-condi-
tioning system is set to Ã(see th evehicl e
Operator' sManual).
XCall up th eclimat econtrol men u
(
Ypage 73) .
XTo select ClimateMod e:tur nand press
th econtroller .
XIf necessary, chang esides: slide th econ-
troller to th elef t8 or to th eright 9.
XTo chang eth esetting :tur nth econtroller .
Exiting amen u
XPress th e% button.
The curren tairflow setting is shown in th ecli -
mat econtrol bar: DIFFUSE
,MEDIUMor FOCUS
(Ypage 71) .
Setting the perfu meatomi zer
This setting is made in th emain area of th e
climat econtrol menu. Further information about th
eperfum eatom-
izer (see th evehicl eOperator' sManual).
XCall up th eclimat econtrol men u
(
Ypage 73) .
XTo select Air Freshener:tur nand pre ss
th econtroller .
The setting elemen tis active .
XTo start/sto pth eperfum eatomizer: pre ss
th econtroller .
XTo set theinten sity: tur nth econtroller
when th eatomizer is switched on .
Exiting amen u
XPressthe% button.
Switching the ionization on/off
This setting is made in th emain area of th e
climat econtrol menu.
Further information on ionization (see th e
vehicl eOperator' sManual).
XCall up th eclimat econtrol men u
(
Ypage 73).
XTo select Ionizatio n:tur nand pre ssthe
controller .
The setting elemen tis active .
XTo switch th eionization on/off :pre ssthe
controller .
Exiting amen u
XPressthe% button.
Pre-entry climate control via SmartKey
This function is available for PLUG‑INHYB RID
vehicl es.
Climate control settings75
Vehicle functions
Z

When you unlock the vehicle, the driver's seat
and the vehicle interior:
Ris briefly pre-heated
Ris briefly pre-ventilated
XCall up the climate control menu
(
Ypage 73).
XTo selectPre-entryClimateControl
via Key:turn and press the controller.
XTo switch on or off: turn and press the
controller.
Exiting a menu
XPress the %button.
You can find further information on pre-entry
climate control via key in the vehicle Opera-
tor's Manual.
Pre-entry climate control at time of
departure
This function is available for PLUG‑ IN HYBRID
vehicles.
You can climatize the driver's seat and the
vehicle interior in time for the departure time
set.
XCall up the climate control menu
(
Ypage 73).
XTo select Pre-entry Climate Ctrl.
at Departure Time:turn and press the
controller.
A rotary menu appears.
XTo select the desired setting: turn the
controller.
The menu symbol, text and image show the
selected setting.
Exiting a menu
XPress the %button.
Child-proof locks
Switching the rear compartment dis-
plays on/off
This function serves to switch the rear-com-
partment displays on/off.
XPress the Øbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
XTo select Parental Control: turn and
press the controller.
The menu to select the side in the rear
compartment is activated.
XSelect Rear LeftorRear Right.
XTo switch Displayon/off: turn the con-
troller.
Exiting the vehicle settings:
XTo select &: slide 6and press the con-
troller.
Locking/unlocking rear compart-
ment displays
This function serves to lock/unlock the rear-
compartment displays.
XPress the Øbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
76Child-proof locks
Vehicle functions

XTo selectParental Control: turn and
press the controller.
The menu to select the side in the rear
compartment is activated.
XSelect Rear LeftorRear Right.
XTo select Lockto lock/unlock the rear
compartment displays: slide 9and
press the controller.
The display is locked, a corresponding mes-
sage with &appears on the screen.
Unlock
appears in the display.
Exiting the vehicle settings:
XTo select &: slide 6and press the con-
troller.
iThe volume can still be adjusted if you
have locked the rear compartment display. It can also be switched on/off using the
integrated switch.
360° camera
General notes
The 360° camera surveys the vehicle sur-
roundings and assists you, for example when
parking or at exits with reduced visibility.
The 360° camera is only an aid. It is not a
replacement for your attention to your imme-
diate surroundings. You are always responsi-ble for safe maneuvering and parking. Make
sure that no persons or animals are in the
maneuvering range.
Further information on the 360°camera can
be found in the vehicle Operator's Manual.
Displaying the 360° camera image
The 360° camera image can be displayed if:
Ryour vehicle is equipped with a 360° cam-
era
RCOMAND is switched on
Rthe 360° Camerafunction is switched on
XPress the Øbutton.
The vehicle menu is displayed.
XSelect 360° Camera.
The 360° camera image appears in split-
screen mode.
You will see the previous view on the display
if, when the function is switched on:
Ryou turn the SmartKey to position 1in the
ignition lock
Ryou select transmission position P
Rwhen you are driving at moderate speeds
Manually switching the display
XTo select &: slide 6and press the con-
troller.
Automatically switching the display:
XYou can automatically switch the 360 cam- era display using reverse gear (
Ypage 77).
Switching the 360° camera auto-
matic mode on/off
This function activates the 360° camera
when reverse gear is engaged.
XPress the Øbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
XTo switch to the menu bar: slide 6the
controller.
XTo select System Settings: turn and
press the controller.
XSelect 360° Camera.
XSelectActivation by R gear.
The function is switched on Oor off ª,
depending on the previous status.
360° camera77
Vehicle functions
Z

Opening the camera cover for clean-
ing
XTo selectOpenCameraCoverin the 360°
camera menu: turn the controller and press
to confirm.
The Please
Wait...message appears for
approximately three seconds.
The camera cover opens.
The camera cover closes automatically if:
Rthe ignition is switched off
Rthe vehicle exceeds a moderate speed
Rear view camera
General notes
The rear view camera covers the immediate
surroundings of the vehicle and assists you
when parking.
The rear view camera is only an aid. It is not a
replacement for your attention to your imme- diate surroundings. You are always responsi-
ble for safe maneuvering and parking. When
maneuvering or parking, make sure that there
are no persons, animals or objects in the area
in which you are maneuvering.
You can find further information about the
rear view camera in the vehicle Operator's
Manual.
Switching the rear view camera auto-
matic mode on/off
This function activates the rear view camera
when reverse gear is engaged.
XPress the Øbutton.
or
XPress Vehiclein the main function bar.
The vehicle menu is displayed.
XSlide 6the controller.
XTo select System Settings: turn and
press the controller.
XSelect Rear View Camera.
The Rear View Camera
menu appears.
XSelect Activation by R gear.
The function is switched on Oor off ª,
depending on the previous status.
When you start the vehicle and engage
reverse gear, the camera cover opens auto-
matically if the function is activated. The
area behind the vehicle is shown with guide
lines in the display (see the vehicle Opera-
tor's Manual).
Object detection
The rear view camera can detect moving and
stationary objects. If, for example, a pedes-
trian or another vehicle is detected, these
objects are marked with bars. The system is
only able to detect and mark stationary
objects when your vehicle is moving. By con- trast, stationary objects will always be detec-
ted and marked.
Switching object detection on/off
XTo select Object Detectionin the rear
view camera menu: turn and press the con-
troller.
The function is switched on Oor off ª,
depending on the previous status.
Opening the camera cover for clean-
ing
XTo select Open Camera Coverin the rear
view camera menu: turn and press the con-
troller.
The Please
Wait...message appears for
approximately three seconds.
The camera cover opens.
The camera cover closes automatically if:
Rthe ignition is switched off
Rthe vehicle pulls away
78Rear view camera
Vehicle functions