RChanging the instrument cluster settings
(Ypage 179)
RChanging the light settings (Ypage 179)
RChanging the vehiclesettings (Ypage 180)
RChanging the convenience settings
(Ypage 181)
RRestoring the factory settings (Ypage 181)
Instrument cluster
Selecting the unit of measurement for dis-
tance
The Display Unit Speed-/Odometer:func-
tion allows you to choose whether certain dis-
plays appear inkilometers or milesin the mul-
tifunction display.
You can determine whether the multifunction
displ ay shows some messages in miles or kilo-
meters.
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Inst. Clustersubmenu.
XPress ato confirm.
XPress the :or9 button to select the
Display Unit Speed-/Odometer:func-
tion.
You willsee the selected setting: km
ormiles.
XPress the abutton to save the setting.
The selected unit of measurement for distance
applies to:
RVehicles with instru ment cluster in kilo-
meters: digital speedometer inthe Trip
menu
Rthe odometer and the tr ipodometer
Rthe tr ipcomputer
Rthe current consumption and the range
Rthe navigation instructions inthe Navimenu
Rcruise control
RSPEEDTRONIC
RDIST RONIC PLUS
Rthe service interval display
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Instr. Clustersubmenu.
XPress ato confirm.
XPress the :or9 button to select the
Permanent Display:function.
You willsee the selected setting: Outside
TemperatureorSpeedometer [mph].
XPress the abutton to save the setting.
iSpeed isdisplayed in mph.
Lights
Setting the daytime running lamps
iThis function isnot availab le inCanada.
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Lightssubmenu.
XPress ato confirm.
XPress :or9 to select the DaytimeRunning Lightsfunction.
If the Daytime Running Lightshave been
swit ched on, the cone of light and the W
symbol inthe multifunction display are shown
in red.
XPress the abutton to save the setting.
Further information on daytime running lamps
(
Ypage 85).
Surround lighting and exterior lighting
delayed switch-off
XPress the =or; button on the steering
wheel to select the Sett.menu.
XPress the:or9 button to select the
Lightsubmenu.
XPress ato confirm.
XPress :or9 to select the SurroundLightingfunction.
When the Surround Lightingfunction is
activated, the cone of light in the multifunc-
tion display is shown in red.
XPress theabutton to save the setting.
Menus and submenus179
On-board computer and displays
Z
