7
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key System allows you to lock
or unlock your vehicle, open your liftgate and start the
engine. It is important to make sure the Intelligent Key is
with you (that is, in your pocket or purse).
LOCKING AND UNLOCKING YOUR VEHICLE
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch
1 or the liftgate request switch 2 or press
the
button 3 on the key fob.
To unlock the vehicle, perform one of the
following procedures:
• Push either door handle request switch
1 or the liftgate request
switch
2; the corresponding door will unlock. Push the door handle
request switch
1 or the liftgate request switch 2 again within 1
minute; all other doors will unlock, or
• Press the
button 4 on the key fob to unlock the driver’s side
door. Press the
button 4 again; all other doors will unlock.
The Intelligent Key can also be used to activate the panic alarm by
pressing and holding the
button 5 for more than 1 second. Once
activated, the panic alarm and headlights will stay on for a period
of time.
INFINITI INTELLIGENT KEY BATTERY DISCHARGE
If the battery in the Intelligent Key is almost
discharged, the guide light
6 of the Intelligent Key
port blinks and the Intelligent Key insertion indicator
7 is displayed in the vehicle information display.
To start the engine under these circumstances,
insert the Intelligent Key into the key port with the
key ring side facing backward until it latches into
place. Then push the ignition switch to start
the engine.
To remove the Intelligent Key from the port, push the
ignition switch to turn the engine off and then pull
the Intelligent Key out of the port.
The Intelligent Key port does not charge the
Intelligent Key battery. If you see the Intelligent
Key warning light
8, replace the battery in the
Intelligent Key.
Do not insert the mechanical key or other objects into
the key port because they will damage the key port.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and
the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
F E
1
2
3
4
5
6
7
8
2128163_16b_QX50_US_pQRG_091515.indd 79/15/15 2:55 PM
9
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the adjusting switches fo\
r each feature.
• Push the SET switch, and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to
your preferences.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
To link a memorized position to your INFINITI Intelligent Key, press the\
button on the
key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Heated Seats
The front seats can be warmed by built-in heaters.
The heated seat switches
1 are located on the
center console and can be operated independently
of each other.
The heater is controlled by a thermostat,
automatically turning the heater on and off. The
indicator light will remain on as long as the switch is on.
To turn on the heater, turn the control knob to the right until you have\
reached the desired
heat range.
To turn off the heater, return the control knob to the OFF position.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1
2128163_16b_QX50_US_pQRG_091515.indd 99/15/15 2:55 PM
