8
first drive features
Liftgate Release
It is important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).
Use one of the following methods to unlock the liftgate:
• Press the
button 1 on the INFINITI Intelligent Key twice.
• Push the liftgate request switch
2.
To open the liftgate, push the opener switch 3 located just
above the license plate and pull the opener handle.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Power Seat Adjustments
To slide the seat forward or backward, push the
switch
1 forward or backward.
To recline the seatback, push the switch 2
forward or backward.
SEAT LIFTER (driver’s seat and if so equipped
for passenger’s seat)
To adjust the angle of the front portion or height of
the seat, push the front or rear end of the switch
1 up or down.
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the swi\
tch 3.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (se\
ction 1)”
of your Owner’s Manual.
1
2
3
123
2128163_16b_QX50_US_pQRG_091515.indd 89/15/15 2:55 PM
9
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the adjusting switches fo\
r each feature.
• Push the SET switch, and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to
your preferences.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
To link a memorized position to your INFINITI Intelligent Key, press the\
button on the
key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Heated Seats
The front seats can be warmed by built-in heaters.
The heated seat switches
1 are located on the
center console and can be operated independently
of each other.
The heater is controlled by a thermostat,
automatically turning the heater on and off. The
indicator light will remain on as long as the switch is on.
To turn on the heater, turn the control knob to the right until you have\
reached the desired
heat range.
To turn off the heater, return the control knob to the OFF position.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1
2128163_16b_QX50_US_pQRG_091515.indd 99/15/15 2:55 PM
