2016 Hyundai Genesis Quick Reference Guide

Quick Reference Guide I 31
FEATURES AND CONTROLS
30 I Quick Reference Guide
GENESIS HYUNDAI SEAT WARMER (front seats)
If you want to turn it off immediately,
press and hold the button.
CLIMATE CONTROL SYSTEM SEAT (front seats)
If you want to turn it off immediately,
press and hold the button. Each time you push the button,
the setting is changed as follows:
OFFHIGH MIDDLE LOW – Heat
– CoolEach time you push the button,
the setting is changed as follows:
OFFHIGH MIDDLE LOW
Type AType BType AType B
REAR WINDOW CURTAINPress the button to lower.
Press the button again to raise.Front
Rear
NOTE:
If curtain is in up position, curtain will move downward
automatically when shifting into Reverse. Curtain will raise
automatically when shifter is in Drive and vehicle speed is
above 10 mph.

Quick Reference Guide I 33
FEATURES AND CONTROLS
DRIVING
32 I Quick Reference Guide
GENESIS HYUNDAI PARKING GUIDE SYSTEM
The parking guide system will
activate when the back-up light is
ON and the shift lever in the
R (Reverse) position.
PARKING ASSIST SYSTEM (PAS)
The parking assist system assists the
driver during movement of the vehicle
by chiming if any object is sensed within
the distance of 39.5 inches in front and
47.2 inches in behind the vehicle.PAS ON
/ OFF
To turn the PAS off, press the ON/OFF
button. To turn the PAS on, press it again.
If you move the shift lever to R with the
engine start/stop button in ON and the
parking assist system in OFF, the parking
assist system will turn ON automatically.
The system will automatically turn off
when vehicle is driven forward at a speed
above 6 mph.
Type AType B
HEATED STEERING WHEEL
Pressing the heated steering wheel
button warms the steering wheel.
The indicator on the button is
illuminated.
Type AType BREARVIEW CAMERA
When transmission is shifted into
R (Reverse), rearview camera displays
the area behind the vehicle.
To switch view, press "Top View"
button on screen.

Quick Reference Guide I 35
DRIVING
34 I Quick Reference Guide
GENESIS HYUNDAI AUTOMATIC EMERGENCY BRAKING (AEB)
The Automatic Emergency Braking
(AEB) helps avoid accidents by
identifying critical situations early and
warning the driver.
Also, the system helps reduce the
severity of crashes which cannot be
avoided by lowering the speed of
collision and, in some cases, by
preparing the vehicle and restraint
systems for impact.
TIRE PRESSURE MONITORING SYSTEM (TPMS)LOW TIRE PRESSURE INDICATOR Illuminates if one or more of your tires is significantly under-inflated. TPMS MALFUNCTION INDICATOR
Blinks for approximately one minute, then remains illuminated when
there is a malfunction with the TPMS. Inspect all tires and adjust tire
pressure to specification. If the lamp remains illuminated, have the
system checked by an authorized Hyundai dealer as soon as possible.
Low Tire Pressure Position Telltale and
Tire Pressure Telltale
( Shown on the LCD display )Low Tire Pressure Indicator /
TPMS Malfunction Indicator
NOTE: Vehicle must
be driven for accurate
tire pressure reading.
ELECTRIC PARKING BRAKE (EPB)
or
Stop the vehicle then pull
the EPB switch.
Applying
Move shift lever from P to
R, N or D while depressing
the brake pedal.
Releasing
Press the EPB switch while
depressing the brake pedal.
NOTE:
If necessary, emergency braking is
possible by pulling and holding the EPB
switch.
NOTE:
System can be Enabled/
Disabled in the User Settings page
of the instrument cluster under
Driving Assist.
NOTE:
Units can be changed in the User Settings page of the instrument
cluster under Other Features.
AUTO HOLD
To cancel the AUTO HOLD operation,
press the AUTO HOLD switch again. The Auto Hold feature assists in steep
hill areas. It holds the brake until the
accelerator pedal is pressed.
1.
Press the AUTO HOLD
switch.
WHITE

2.
Stop the vehicle by pressing
the brake pedal. The brakes
will remain engaged even if
the brake pedal is released.
GREEN
3.
The brakes will release
when the accelerator pedal
is pressed with transmission
in D, R or manual mode.
WHITE

36 I Quick Reference Guide
Quick Reference Guide I 37
DRIVING
GENESIS HYUNDAI ELECTRONIC STABILITY CONTROL (ESC)
The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.t

5P
UVSO
-,"4
PO


press the LKAS switch
t

5P
UVSO
-,"4
PGG


press the switch again.The Lane Keeping Assist System
detects lane markers on the road,
and assists the driver’s steering to
help keep the vehicle between lanes.
LANE KEEPING ASSIST SYSTEM (LKAS)
ESC automatically selects the ON
position when the engine is started.
To turn off Traction Control
press the ESC OFF button once.To turn off Traction and Stability
ControlPress and hold the ESC OFF button
for more than 3 seconds.NOTE:
LKAS operates only when the
vehicle speed is above 38 mph and when
the LKAS indicator is green displayed in
the instrument cluster.
Refer to the Owner's Manual for more
detailed information and how to setup
LKAS in the User Setting Mode.
NOTE:
LKAS Settings can be
adjusted in the User Settings page
of the instrument cluster under
Driving Assist.
AUTOMATIC TRANSMISSION (
) : Press the shift button, then move shift lever.
() : Depress the brake pedal, then move shift lever.
() : Move shift lever.
Move the shift lever from D (Drive) into the manual gate to select.
Move the shift lever forward (+) to up shift or rearward (–) to downshift.Sport modePADDLE SHIFTERPress (-) to
downshiftPress (+) to
upshift
The Paddle shifter is available
when the shift lever is in the D
position or the sport mode.
Pull the [+] or [-] paddle shifter
once to shift up or down one gear.

Quick Reference Guide I 39
38 I Quick Reference Guide
DRIVING
GENESIS HYUNDAI
You can select the drive mode
according to your preference or the
road condition.
The drive mode defaults to the Normal
mode whenever the engine start/stop
button is turned to the ON position.Each time you press the button, the
drive mode is changed as follows :
DRIVE MODE INTEGRATED CONTROL SYSTEMNormal mode is not displayed on the instrument cluster.Normal mode
Sport mode focuses on dynamic driving by automatically controlling the
steering wheel, engine and transmission system.Sport mode Snow mode helps you to drive more
effectively on the slippery road such
as snowy or muddy road.
Press and hold the button to select
the Snow mode.
Press the button again to return to
previous mode. Snow mode
Active ECO helps improve fuel efficiency by controlling certain engine
and transmission system operating parameters.ECO mode
Normal mode
Sport mode ECO mode The BSD (Blind spot detection)
system uses a radar sensor to alert
the driver while driving.
It senses the rear side territory of the
vehicle and provides information to
the driver.
1 Blind spot detection2 Lane change assist3 Rear cross traffic alert
The BSD system will activate, if vehicle speed exceeds 19mph.
The rear cross traffic alert will activate, if vehicle is in reverse at speeds
below 6 mph.
BLIND SPOT DETECTION SYSTEM (BSD)
r
To turn the BSD on, press the BSD button.
(indicator illuminated)
r
To turn the BSD off, press the
BSD button again.
12
3

Quick Reference Guide I 41
40 I Quick Reference Guide
DRIVING
MEMO
HYUNDAI GENESIS
HYUNDAI OWNER DEALERSHIP NAME SALES CONSULTANT DATE VIN PREVIOUS VEHICLEGENESIS CUSTOMER DELIVERY CHECKLISTBEFORE DELIVERY☐ CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE
TEST TICKET HERE☐
SET TIRE PRESURE LF RF RR LR ☐ VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACE Sales Consultant Date Sales Manager Date
Customer Date
Email
@
CRUISE CONTROL/ADVANCED
SMART CRUISE CONTROL
Setting vehicle distance
(Advanced smart cruise
control only)The vehicle to vehicle distance will
automatically activate when you set
the cruise speed. This system assist you in setting the
distance from the vehicle ahead and
will maintain the selected distance
without you depressing the
accelerator or the brake pedal.
If your vehicle is equipped with Advanced smart cruise control and you
wish to eliminate the vehicle distance function, you can change cruise
control setting to a standard setting.
Press the Cruise Control button on the
steering wheel to turn on Cruise Control.
Then press and hold the vehicle distance
button for more than 2 seconds to toggle
between Smart Cruise Control (SCC) and
Cruise Control (CC) mode.
Please refer to your Owner's Manual for
more information.Each time the vehicle distance set
button is pressed, the vehicle to
vehicle distance changes as follows:The cruise control system allows
you to program the vehicle to
maintain a constant speed without
holding the accelerator pedal.
Distance 4
Distance 3
Distance 2
Distance 1
1 To On/Off the cruise control.2 To Resume or Increase
the cruise control speed.3 To Set or Decrease
the cruise control speed.4 To Cancel the cruise control.
2314