2016 Hyundai Genesis change wheel

STEERING WHEEL AUDIO CONTROL
23
1
1 VOLUME/MUTE

Scroll up or down to adjust the volume.
Press to mute or unmute the sound.2 SEEK/PRESET Change station.3 MODE

Change the audio source.
To Answer a Call:
t Press
button on the steering wheel.
To Reject a Call:
t Press
button on the steering wheel.
To Adjust Ring Volume:
t Use the VOLUME buttons on the steering wheel.
To Transfer a Call to the Phone
(Secret Call):
t Press and hold
button on the steering wheel until the
audio system transfers a call to the phone.
To Finish a Call:
t Press
button on the steering wheel.
BLUETOOTH OPERATIONAL TIPSIn the following situations you or the other party may have difficulty
hearing each other:
1. When Bluetooth volume is set too high. High volume may result in
distortion and echo.
2. When driving on a rough road, high speeds and/or with the window open.
3. When the air conditioning vents are facing the microphone and/or when
the air conditioning fan is at the max speed.Steering wheel bluetooth control
1 TALK

Activates voice recognition.2 CALL

Places and transfers calls.3 END

Ends calls or cancels functions.
2
3
1
Making a call using voice recognition: The menu tree identifies available voice recognition Bluetooth®
functions.Calling by Name:1. P
ress
button.
2. Say the following command after the Voice Recognition beep:


<00720001006900240042004d004d0001001d002b00500049004f00010034004e004a00550049001f0075001b000100240050004f004f00460044005500540001005500490046000100440042004d004d0001005500500001002b00500049004f0001003400
4e004a00550049000f>

r
i
$BMM
+PIO
4NJUI
PO
PO
.PCJMFJO
0G

Quick Reference Guide I 39
38 I Quick Reference Guide
DRIVING
GENESIS HYUNDAI
You can select the drive mode
according to your preference or the
road condition.
The drive mode defaults to the Normal
mode whenever the engine start/stop
button is turned to the ON position.Each time you press the button, the
drive mode is changed as follows :
DRIVE MODE INTEGRATED CONTROL SYSTEMNormal mode is not displayed on the instrument cluster.Normal mode
Sport mode focuses on dynamic driving by automatically controlling the
steering wheel, engine and transmission system.Sport mode Snow mode helps you to drive more
effectively on the slippery road such
as snowy or muddy road.
Press and hold the button to select
the Snow mode.
Press the button again to return to
previous mode. Snow mode
Active ECO helps improve fuel efficiency by controlling certain engine
and transmission system operating parameters.ECO mode
Normal mode
Sport mode ECO mode The BSD (Blind spot detection)
system uses a radar sensor to alert
the driver while driving.
It senses the rear side territory of the
vehicle and provides information to
the driver.
1 Blind spot detection2 Lane change assist3 Rear cross traffic alert
The BSD system will activate, if vehicle speed exceeds 19mph.
The rear cross traffic alert will activate, if vehicle is in reverse at speeds
below 6 mph.
BLIND SPOT DETECTION SYSTEM (BSD)
r
To turn the BSD on, press the BSD button.
(indicator illuminated)
r
To turn the BSD off, press the
BSD button again.
12
3

Quick Reference Guide I 41
40 I Quick Reference Guide
DRIVING
MEMO
HYUNDAI GENESIS
HYUNDAI OWNER DEALERSHIP NAME SALES CONSULTANT DATE VIN PREVIOUS VEHICLEGENESIS CUSTOMER DELIVERY CHECKLISTBEFORE DELIVERY☐ CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE
TEST TICKET HERE☐
SET TIRE PRESURE LF RF RR LR ☐ VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACE Sales Consultant Date Sales Manager Date
Customer Date
Email
@
CRUISE CONTROL/ADVANCED
SMART CRUISE CONTROL
Setting vehicle distance
(Advanced smart cruise
control only)The vehicle to vehicle distance will
automatically activate when you set
the cruise speed. This system assist you in setting the
distance from the vehicle ahead and
will maintain the selected distance
without you depressing the
accelerator or the brake pedal.
If your vehicle is equipped with Advanced smart cruise control and you
wish to eliminate the vehicle distance function, you can change cruise
control setting to a standard setting.
Press the Cruise Control button on the
steering wheel to turn on Cruise Control.
Then press and hold the vehicle distance
button for more than 2 seconds to toggle
between Smart Cruise Control (SCC) and
Cruise Control (CC) mode.
Please refer to your Owner's Manual for
more information.Each time the vehicle distance set
button is pressed, the vehicle to
vehicle distance changes as follows:The cruise control system allows
you to program the vehicle to
maintain a constant speed without
holding the accelerator pedal.
Distance 4
Distance 3
Distance 2
Distance 1
1 To On/Off the cruise control.2 To Resume or Increase
the cruise control speed.3 To Set or Decrease
the cruise control speed.4 To Cancel the cruise control.
2314