2016 FORD FUSION (AMERICAS) Owners Manual

Page 377 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual Action and Description
Message
Explore all supported digital media on your media device
connected to the USB port. You can only view media content
which is compatible with SYNC; other files saved are

Page 378 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual Action and Description
Message
1. Press the OK button. When find SYNC appears in the
display, press the OK button again.
2. Follow the directions in your phones manual to put your phone into discover

Page 379 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual You can then scroll to:
Action and Description
Message
Press the OK button.
Sys Settings
Press the 
OK button.
Bluetooth device
You can then select one of the following:
Have SYNC guide you by asking

Page 380 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual SYNC™ TROUBLESHOOTING
Your SYNC system is easy to use. However,
should questions arise, see the tables
below.
Use the website at any time to check your
phones compatibility, register your
account a

Page 381 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual Phone issues
Possible solution(s)
Possible cause(s)
Issue
Depending upon your phone,
you may have to grant SYNC
permission to access your
phonebook contacts. Make
sure to confirm when
prompted by your

Page 382 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual USB and media issues
Possible solution(s)
Possible cause(s)
Issue
Try turning off the device,
resetting the device,
removing the devices
battery, then trying again.
This may be a possible
device malf

Page 383 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual Vehicle Health Report and Services (Traffic, Directions and Information) issues
Possible solution(s)
Possible cause(s)
Issue
This is a free feature, but you
must first register online to
use it.
You d

Page 384 of 518

FORD FUSION (AMERICAS) 2016 2.G Owners Manual Voice command issues
Possible solution(s)
Possible cause(s)
Issue
Review the phone voice
commands and the media
voice commands at the
beginning of their respective
sections.
You may be using the wrong